Fabrication and capillary characterization of micro-grooved wicks with reentrant cavity array

[1]  Evangelos Tsotsas,et al.  Capillary valve effect during slow drying of porous media , 2016 .

[2]  Yong Tang,et al.  Effect of structural parameters on pool boiling heat transfer for porous interconnected microchannel nets , 2016 .

[3]  Yong Tang,et al.  Pool boiling heat transfer enhancement by porous interconnected microchannel nets at different liquid subcooling , 2016 .

[4]  Evangelos Tsotsas,et al.  Two-phase flow with capillary valve effect in porous media , 2016 .

[5]  Wei Chen,et al.  Investigation on thermal resistance of a novel evaporator wick structure , 2015 .

[6]  Wangyu Liu,et al.  The performance of the novel vapor chamber based on the leaf vein system , 2015 .

[7]  M. Kedzierski.  Effect of concentration on R134a/Al 2 O 3 nanolubricant mixture boiling on a reentrant cavity surface , 2015 .

[8]  Guodong Xia,et al.  Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks , 2015 .

[9]  Yong Tang,et al.  Characterization of capillary rise dynamics in parallel micro V-grooves , 2014 .

[10]  Guodong Xia,et al.  Heat transfer in the microchannels with fan-shaped reentrant cavities and different ribs based on field synergy principle and entropy generation analysis , 2014 .

[11]  Yong Tang,et al.  A multi-artery vapor chamber and its performance , 2013 .

[12]  Hao Peng,et al.  Study on heat transfer performance of an aluminum flat plate heat pipe with fins in vapor chamber , 2013 .

[13]  Bahgat Sammakia,et al.  Modeling of boiling flow in microchannels for nucleation characteristics and performance optimization , 2013 .

[14]  Ningling Wang,et al.  A novel wick structure of vapor chamber based on the fractal architecture of leaf vein , 2013 .

[15]  Zhongliang Liu,et al.  Experimental investigations of flat plate heat pipes with interlaced narrow grooves or channels as capillary structure , 2013 .

[16]  Shung-Wen Kang,et al.  Experimental studies of thermal resistance in a vapor chamber heat spreader , 2013 .

[17]  Shung-Wen Kang,et al.  Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures , 2013 .

[18]  M. Piasecka.  An application of enhanced heating surface with mini-reentrant cavities for flow boiling research in minichannels , 2013 .

[19]  Yong Tang,et al.  Effect of fabrication parameters on capillary performance of composite wicks for two-phase heat transfer devices , 2013 .

[20]  J. Weibel,et al.  Experimental Characterization of Capillary-Fed Carbon Nanotube Vapor Chamber Wicks , 2013 .

[21]  Yong Tang,et al.  Characterization of capillary performance of composite wicks for two-phase heat transfer devices , 2013 .

[22]  P. Naphon,et al.  Application of two-phase vapor chamber technique for hard disk drive cooling of PCs , 2013 .

[23]  K. Kim,et al.  Enhanced heat transfer performance of alumina sponge-like nano-porous structures through surface wettability control in nucleate pool boiling , 2012 .

[24]  Jeehoon Choi,et al.  A new CPU cooler design based on an active cooling heatsink combined with heat pipes , 2012 .

[25]  A. Majumdar,et al.  Enhanced Heat Transfer in Biporous Wicks in the Thin Liquid Film Evaporation and Boiling Regimes , 2012 .

[26]  Sung Jin Kim,et al.  Capillary performance of bi-porous sintered metal wicks , 2012 .

[27]  K. Kim,et al.  Morphological change of plain and nano-porous surfaces during boiling and its effect on nucleate pool boiling heat transfer , 2012 .

[28]  Jinliang Xu,et al.  Copper foam based vapor chamber for high heat flux dissipation , 2012 .

[29]  J. Murthy,et al.  Wicking and thermal characteristics of micropillared structures for use in passive heat spreaders , 2012 .

[30]  M. Shanahan,et al.  Capillary rise of superspreaders. , 2011, Journal of colloid and interface science.

[31]  Stéphane Lips,et al.  Physical mechanisms involved in grooved flat heat pipes: Experimental and numerical analyses , 2011 .

[32]  P. Erra,et al.  Modifying the heat transfer and capillary pressure of loop heat pipe wicks with carbon nanotubes , 2011 .

[33]  Christophe Clanet,et al.  A universal law for capillary rise in corners , 2011, Journal of Fluid Mechanics.

[34]  Jung-Chang Wang,et al.  Development of 30 Watt high-power LEDs vapor chamber-based plate , 2010 .

[35]  Zhenping Wan,et al.  Forming mechanism of integral serrated high fins by plowing-extruding based on variational feed , 2010 .

[36]  Yong Tang,et al.  Experimental investigation on capillary force of composite wick structure by IR thermal imaging camera , 2010 .

[37]  Shwin-Chung Wong,et al.  Performance tests on a novel vapor chamber , 2009, 2009 4th International Microsystems, Packaging, Assembly and Circuits Technology Conference.

[38]  T. Fisher,et al.  Effects of carbon nanotube coating on flow boiling in a micro-channel , 2009 .

[39]  Tang Yong,et al.  Investigation into performance of a heat pipe with micro grooves fabricated by extrusion–ploughing process , 2009 .

[40]  L. Melvin,et al.  Capillary driven flow in micro scale surface structures , 2009 .

[41]  Aliakbar Akbarzadeh,et al.  Experimental determination of wick properties for loop heat pipe applications , 2009 .

[42]  Sungho Jeong,et al.  Fabrication and evaluation of a copper flat micro heat pipe working under adverse-gravity orientation , 2008 .

[43]  Guoyuan Ma,et al.  The experimental investigation on thermal performance of a flat two-phase thermosyphon , 2008 .

[44]  N. Fries,et al.  The effect of evaporation on the wicking of liquids into a metallic weave. , 2008, Journal of colloid and interface science.

[45]  Ivan Catton,et al.  Thermophysical Properties of Biporous Heat Pipe Evaporators , 2008 .

[46]  L. Mok,et al.  A Graphite Foams Based Vapor Chamber for Chip Heat Spreading , 2006 .

[47]  Jeung Sang Go,et al.  Quantitative thermal performance evaluation of a cost-effective vapor chamber heat sink containing a metal-etched microwick structure for advanced microprocessor cooling , 2005 .

[48]  Tang Yong,et al.  The establishment and analysis of fin formation model during ploughing process , 2003 .

[49]  Shung-Wen Kang,et al.  Fabrication of star grooves and rhombus grooves micro heat pipe , 2002 .

[50]  Tommy Nylander,et al.  Analytical approach for the Lucas-Washburn equation. , 2002, Journal of colloid and interface science.

[51]  S. Ushioda,et al.  Fundamental investigation of roll bond heat pipe as heat spreader plate for notebook computers , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[52]  R. Lenormand,et al.  Mechanisms of the displacement of one fluid by another in a network of capillary ducts , 1983, Journal of Fluid Mechanics.

[53]  E. W. Washburn.  The Dynamics of Capillary Flow , 1921 .