Sustainability of abrasive processes
暂无分享,去创建一个
Barbara Linke | Michael Zwicky Hauschild | Jan C. Aurich | Benjamin Kirsch | Marina Carrella | M. Hauschild | J. Aurich | B. Linke | B. Kirsch | M. Carrella
[1] C. Heinzel,et al. Engineered wheels for grinding of optical glass , 2009 .
[2] Rong-Tsong Lee,et al. A novel method of composite electroplating on lap in lapping process , 2007 .
[3] H. Yavuz,et al. Polishing experiments on surface quality of building stone tiles , 2011 .
[4] Fritz Klocke,et al. Combination of Speed Stroke Grinding and High Speed Grinding with Regard to Sustainability , 2011 .
[5] Hunter Rouse,et al. Closure of "Experimental Investigation of Fire Monitors and Nozzles" , 1952 .
[6] Beth Rosenberg,et al. Ergonomics of abrasive blasting: a comparison of high pressure water and steel shot. , 2006, Applied ergonomics.
[7] Hunter Rouse,et al. Experimental Investigation of Fire Monitors and Nozzles , 1951 .
[8] Xiaobin Le,et al. Material removal rate in flat lapping , 1999 .
[9] Radovan Kovacevic,et al. On-line monitoring of depth of cut in AWJ cutting , 2004 .
[10] Xipeng Xu,et al. Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys , 2003 .
[11] Pawel Pawlus,et al. The study of cylinder liner plateau honing process , 2009 .
[12] Guangjun Liu,et al. Modelling and analysis of contact stress for automated polishing , 2006 .
[13] T. Gutowski,et al. Environmentally benign manufacturing: Observations from Japan, Europe and the United States , 2005 .
[14] C. Heinzel,et al. Prevention of wheel clogging in creep feed grinding by efficient tool cleaning , 2012 .
[15] G. Sinden,et al. The contribution of PAS 2050 to the evolution of international greenhouse gas emission standards , 2009 .
[16] T. Brockhoff,et al. Grind-Hardening: A Comprehensive View , 1999 .
[17] John W. Sutherland,et al. Dry Machining and Minimum Quantity Lubrication , 2004 .
[18] Chi Fai Cheung,et al. Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing , 2011 .
[19] F. Rehsteiner,et al. High Efficiency Abrasive Tool for Honing , 2002 .
[20] B. Karpuschewski,et al. Modelling and evaluation of the micro abrasive blasting process , 2005 .
[21] J. Elkington. Cannibals with Forks , 1997 .
[22] D. Bouzid,et al. Correlation between the surface quality and the abrasive grains wear in optical glass lapping , 2007 .
[23] Vincent Castranova,et al. COMPARATIVE PULMONARY TOXICITY OF BLASTING SAND AND FIVE SUBSTITUTE ABRASIVE BLASTING AGENTS , 2002, Journal of toxicology and environmental health. Part A.
[24] K. Wegener,et al. Conditioning and monitoring of grinding wheels , 2011 .
[25] Hans Kurt Tönshoff,et al. Properties of Honed Gears During Lifetime , 2000 .
[26] Jeffrey Badger,et al. Factors affecting wheel collapse in grinding , 2009 .
[27] Yingxue Yao,et al. Lapping of Single Crystal Diamond Tools , 2003 .
[28] Pawel Pawlus,et al. Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions , 2010 .
[29] Eduardo Carlos Bianchi,et al. Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels , 2006 .
[30] S. Malkin,et al. Thermal Analysis of Grinding , 2007 .
[31] G. Brundtland,et al. Our common future , 1987 .
[32] Eckart Uhlmann,et al. Resource efficient grinding – solutions and restrictions , 2011 .
[33] R. Kovacevic,et al. Test parameter analysis in abrasive water jet cutting of rocklike materials , 1997 .
[34] Liangchi Zhang,et al. Performance of a new segmented grinding wheel system , 2009 .
[35] Hee-Won Jeong,et al. High-efficiency fixed abrasive polishing method for quartz crystal blanks , 2004 .
[36] Shen Dong,et al. The basic issues in design and fabrication of diamond-cutting tools for ultra-precision and nanometric machining , 2010 .
[37] W. B. Rowe,et al. Optimisation of fluid application in grinding , 2008 .
[38] Paul Shore,et al. Electrolytic In-Process Dressing Superfinishing of Spherical Bearings Using Metal—Resin Bond Ultra-Fine CBN Wheels , 2011, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
[39] Jianxin Deng,et al. Wear of ceramic nozzles by dry sand blasting , 2006 .
[40] Jeong-Du Kim,et al. Stochastic approach to experimental analysis of cylindrical lapping process , 1995 .
[41] Fritz Klocke,et al. Speed Stroke Grinding of γ-Titanium Aluminides , 2006 .
[42] J. Néauport,et al. Loose abrasive slurries for optical glass lapping. , 2010, Applied optics.
[43] Mezghani Sabeur,et al. Energy efficiency optimization of engine by frictional reduction of functional surfaces of cylinder ring-pack system , 2013 .
[44] Toshiyuki Enomoto,et al. A newly developed polishing pad for achieving high surface flatness without edge roll off , 2011 .
[45] F. W. Pinto,et al. Simulation for optimizing grain pattern on Engineered Grinding Tools , 2008 .
[46] Makoto Fujishima,et al. A study on energy efficiency improvement for machine tools , 2011 .
[47] J. A. Webster,et al. Grinding Fluid Application System Design , 1995 .
[48] William A Heitbrink,et al. Wet abrasive blasting with a win nozzle--a case study. , 2007, Journal of occupational and environmental hygiene.
[49] João Fernando Gomes de Oliveira,et al. Development of Environmentally Friendly Fluid for CBN Grinding , 2006 .
[50] Jan C. Aurich,et al. High-performance dry grinding using a grinding wheel with a defined grain pattern , 2008 .
[51] Noritsugu Umehara,et al. New polishing method using water-based slurry under AC electric field for glass substrate , 2011 .
[52] Wim Dewulf,et al. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) Part 1: Methodology Description , 2011 .
[53] I. R. Pashby,et al. The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V , 2009 .
[54] A. C. Wang,et al. Developing the polymer abrasive gels in AFM processs , 2007 .
[55] Jan C. Aurich,et al. Evaluation of Abrasive Processes and Machines with Respect to Energy Efficiency , 2012 .
[56] Pei-Lum Tso,et al. An investigation of lapping characteristics for improving the form error of an aspheric lens , 2006 .
[57] Bengt-Göran Rosén,et al. Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear , 2009 .
[58] Sami Kara,et al. Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .
[59] Fritz Klocke,et al. Towards robust polishing strategies for moulds and dies , 2009 .
[60] Janez Grum,et al. A review of the influence of grinding conditions on resulting residual stresses after induction surface hardening and grinding , 2001 .
[61] Jae-Hong Park,et al. Correlation between break-in characteristics and pad surface conditions in silicon wafer polishing , 2008 .
[62] Alexis Laurent,et al. Carbon footprint as environmental performance indicator for the manufacturing industry , 2010 .
[63] Timothy G. Gutowski,et al. An Environmental Analysis of Machining , 2004 .
[64] Didier Dumur,et al. Macroscopic simulation of the liner honing process , 2012 .
[65] Deng Jianxin,et al. Erosion wear behaviours of SiC/(W,Ti)C laminated ceramic nozzles in dry sand blasting processes , 2007 .
[66] Lei Zhang,et al. Effect of mechanical process parameters on friction behavior and material removal during sapphire chemical mechanical polishing , 2011 .
[67] Michael F. Zäh,et al. Comparison of the Resource Efficiency of Alternative Process Chains for Surface Hardening , 2011 .
[68] Juliano Bezerra de Araujo,et al. Evaluation of Two Competing Machining Processes Based on Sustainability Indicators , 2012 .
[69] Bi Zhang,et al. Computer-controlled lapping system for granite surface plates , 2000 .
[70] Uwe Heisel,et al. Process Analysis for the Evaluation of the Surface Formation and Removal Rate in Lapping , 2001 .
[71] Sabeur Mezghani,et al. A study on the influence of bond material on honing engine cylinder bores with coated diamond stones , 2010 .
[72] Ju Long Yuan,et al. Study on the Abrasive Effecting Factors of the Removal Rate during Dual-Lapping Sapphire Wafer , 2009 .
[73] Hans Kurt Tönshoff,et al. Environmental Aspects of Grinding Fluids , 1991 .
[74] Ekkard Brinksmeier,et al. Assessment of Grinding Fluid Effectiveness in Continuous-Dress Creep Feed Grinding , 2002 .
[75] Ming-June Tsai,et al. Robotic polishing of precision molds with uniform material removal control , 2009 .
[76] David Dornfeld,et al. Sustainable Manufacturing – Greening Processes, Systems and Products , 2010 .
[77] M. J. Jackson,et al. High-speed grinding with CBN grinding wheels — applications and future technology , 2001 .
[78] M. El Mansori,et al. Process variability in honing of cylinder liner with vitrified bonded diamond tools , 2009 .
[79] Kamlakar P Rajurkar,et al. Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding , 2012 .
[80] Yaw-Terng Su,et al. An experimental study on tool wear of hydrodynamic polishing process , 2000 .
[81] Irene Buj-Corral,et al. Roughness variability in the honing process of steel cylinders with CBN metal bonded tools , 2011 .
[82] Jun Wang,et al. Modeling effects of abrasive particle size and concentration on material removal at molecular scale in chemical mechanical polishing , 2010 .
[83] A. M. Hoogstrate,et al. Erosion behaviour and pattern transfer accuracy of protecting masks for micro-abrasive blasting , 2004 .
[84] Bernhard Karpuschewski,et al. Cryogenic wet-ice blasting—Process conditions and possibilities , 2013 .
[85] Nenad Funduk,et al. Effects of polishing techniques on the surface roughness of acrylic denture base resins. , 2005, The Journal of prosthetic dentistry.
[86] David K. Aspinwall,et al. Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites , 2012 .
[87] D. Bouzid,et al. Surface behavior during abrasive grain action in the glass lapping process , 2009 .
[88] Bernhard Karpuschewski,et al. Gear finishing by abrasive processes , 2008 .
[89] Christoph Herrmann,et al. Process chain simulation to foster energy efficiency in manufacturing , 2009 .
[90] S. Malkin,et al. Analysis of Energy Partition in Grinding , 1995 .
[91] D. Barrenetxea,et al. Strategies for optimal use of fluids in grinding , 2011 .
[92] Ahmet Kahraman,et al. Entwicklung eines Wirkungsgrad-modells für Schaltgetriebe , 2008 .
[93] Zongde Fang,et al. Study on ultrasonic-assisted lapping of gears , 2007 .
[94] John Elkington,et al. Partnerships from cannibals with forks: The triple bottom line of 21st‐century business , 1998 .
[95] Michael N. Morgan,et al. A study of plane surface grinding under minimum quantity lubrication (MQL) conditions , 2010 .
[96] Michael Zwicky Hauschild,et al. Assessing social impacts in a life cycle perspective-Lessons learned , 2008 .
[97] Dirk Biermann,et al. Abrasive points for drill grinding of carbon fibre reinforced thermoset , 2012 .
[98] Barbara Linke,et al. Application of axiomatic design principles to identify more sustainable strategies for grinding , 2012 .
[99] Taghi Tawakoli,et al. Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel , 2011 .
[100] David Dornfeld,et al. Machine Tool Design and Operation Strategies for Green Manufacturing , 2010 .
[101] Tao Sun,et al. Contact accuracy and orientations affecting the lapped tool sharpness of diamond cutting tools by mechanical lapping , 2006 .
[102] Imin Kao,et al. Effects of mixed abrasive grits in slurries on free abrasive machining (FAM) processes , 2010 .
[103] S D Heintze,et al. Surface roughness and gloss of dental materials as a function of force and polishing time in vitro. , 2006, Dental materials : official publication of the Academy of Dental Materials.
[104] James I. Chang,et al. Recycling oil and steel from grinding swarf , 2006 .
[105] Yiu-Wing Mai,et al. Material removal in the optical polishing of hydrophilic polymer materials , 2000 .
[106] Jayantha Katupitiya,et al. Loose abrasive blasting as an alternative to slurry polishing of optical fibre end faces , 2003 .
[107] Berend Denkena,et al. Dressing Monitoring by Acoustic Emission , 2005 .
[108] E. Brinksmeier,et al. Friction, Cooling and Lubrication in Grinding , 1999 .
[109] Taghi Tawakoli,et al. Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant–lubricant types , 2010 .
[110] Athulan Vijayaraghavan,et al. Evaluating the relationship between use phase environmental impacts and manufacturing process precision , 2011 .
[111] Eric A. Butcher,et al. Non-conservative oscillations of a tool for deep hole honing , 2006 .
[112] Haobo Cheng,et al. Removal rate and surface roughness in the lapping and polishing of RB-SiC optical components , 2007 .
[113] Ekkard Brinksmeier,et al. Surface integrity in material removal processes: Recent advances , 2011 .
[114] Hung Tu-Chieh,et al. A method for reducing tool wear in a polishing process , 2006 .
[115] M. Touge,et al. Removal Rate and Surface Roughness in High-Precision Lapping of Mn-Zn Ferrite , 1996 .
[116] Barbara Linke,et al. Life Cycle Analysis of Grinding , 2012 .
[117] Ram Balachandar,et al. An experimental and numerical study of water jet cleaning process , 2011 .
[118] Orestes Estevam Alarcon,et al. Optimization of the Kinematics Available in the Polishing Process of Ceramic Tiles by Computational Simulations , 2009 .
[119] A. Senthil Kumar,et al. A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding , 2003 .
[120] W. König,et al. Continuous Dressing — Dressing Conditions Determine Material Removal Rates and Workpiece Quality , 1988 .
[121] Soumitra Paul,et al. Modelling of specific energy requirement during high-efficiency deep grinding , 2008 .
[122] A. M. Hoogstrate,et al. Simulation and Improvement of the Micro Abrasive Blasting Process , 2004 .
[123] F. Klocke,et al. Coolant Induced Forces in CBN High Speed Grinding with Shoe Nozzles , 2000 .
[124] Michael Zwicky Hauschild,et al. From Life Cycle Assessment to Sustainable Production: Status and Perspectives , 2005 .
[125] Liangchi Zhang,et al. Damage-free polishing of monocrystalline silicon wafers without chemical additives , 2008 .
[126] Mark Hadfield,et al. Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements , 2005 .
[127] Christoph Herrmann,et al. Eco-efficiency of manufacturing processes: A grinding case , 2012 .
[128] Wim Dewulf,et al. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies , 2012, The International Journal of Life Cycle Assessment.
[129] Chuanzhen Huang,et al. Experimental study on abrasive waterjet polishing for hard–brittle materials , 2009 .
[130] H.-W. Hoffmeister,et al. Auf dem Weg zum Trockenschleifen : Minimalmengenschmierung, Stickstoffkühlung und Graphitschmierung , 1998 .
[131] Dirk Biermann,et al. Development of a honing process for the combination machining of hardened axisymmetric parts , 2010, Prod. Eng..
[132] Roel Daamen,et al. Impact of different slurry and polishing pad choices on the planarization efficiency of a copper CMP process , 2004 .
[133] Liang Fang,et al. Temperature as sensitive monitor for efficiency of work in abrasive flow machining , 2009 .
[134] T. Jin,et al. Investigation of the heat partitioning in high efficiency deep grinding , 2003 .
[135] Yaw-Terng Su,et al. A preliminary study on smoothing efficiency of surface irregularities by hydrodynamic polishing process , 2001 .
[136] Zhengren Huang,et al. Removal Behaviors of Different SiC Ceramics during Polishing , 2010 .
[137] João Fernando Gomes de Oliveira,et al. A novel dressing technique for texturing of ground surfaces , 2010 .
[138] M. Junkar,et al. Analysis of striation formation mechanism in abrasive water jet cutting , 2008 .
[139] E. Uhlmann,et al. Dry-ice blasting for cleaning: process, optimization and application , 1999 .
[140] Marielle Gagnolet. Optimization of the polishing procedure using a robot assisted polishing equipment , 2009 .
[141] Hassan Zahouani,et al. Multiscale study of finish-honing process in mass production of cylinder liner , 2011 .
[142] G. J. Trmal,et al. Comparison of Creep Feed and Conventional Grinding , 1981 .