Relationship between the deformation characteristics and microscopic properties of sandstone explored by the bonded-particle model

Abstract Previous research shows that the mechanical properties of sandstone are strongly influenced by porosity and grain area ratio ( GAR ). This study explores how these microscopic factors affect the elasto-plastic deformation of sandstone, and adopts a modified bonded-particle model to study the deformation behavior of sandstone under biaxial loading. Compared with the natural sandstone, the analysis model can effectively capture the elasto-plastic behavior of sandstone including non-linear elasticity and the variations of plastic flow. Furthermore, the simulated results of biaxial compressive tests show that the mechanical behavior of sandstone with different porosities and GARs possesses the following characteristics: The cohesion is significantly influenced by both GAR and porosity. Greater GAR and porosity values lead to a lesser cohesion. However, the influence of GAR on the friction angle is insignificant, and a lower porosity leads to a higher friction angle. For elastic deformation, the elastic shear and bulk modulus increase with decreasing porosity and increasing GAR . For plastic deformation, the influence of porosity and GAR on the variations of plastic angle β under different shear stress ratios seems insignificant. On the other hand, the plastic strain trajectory ξ increases with increasing porosity, but the influence of GAR is insignificant.

[1]  Yo-Ming Hsieh,et al.  Time-dependent deformation behaviors of weak sandstones , 2008 .

[2]  D. Potyondy.  Simulating stress corrosion with a bonded-particle model for rock , 2007 .

[3]  Fu-Shu Jeng,et al.  Characterizing the deformation behavior of Tertiary sandstones , 2005 .

[4]  Yangsheng Zhao,et al.  Numerical simulation of the top coal caving process using the discrete element method , 2009 .

[5]  Bulent Tiryaki,et al.  Predicting intact rock strength for mechanical excavation using multivariate statistics, artificial neural networks, and regression trees , 2008 .

[6]  F. G. Bell,et al.  Petrographic and engineering properties of sandstones from the Sneinton Formation, Nottinghamshire, England , 1998, Quarterly Journal of Engineering Geology.

[7]  B. Smart,et al.  Progress towards establishing relationships between the mineralogy and physical properties of coal measures rocks , 1982 .

[8]  C. Martin,et al.  A clumped particle model for rock , 2007 .

[9]  Robert W. Zimmerman,et al.  Compressibility of Sandstones , 1991 .

[10]  Yo-Ming Hsieh,et al.  A simple model for stress-induced anisotropic softening of weak sandstones , 2008 .

[11]  V. Palchik.  Influence of Porosity and Elastic Modulus on Uniaxial Compressive Strength in Soft Brittle Porous Sandstones , 1999 .

[12]  L. Dobereiner,et al.  GEOTECHNICAL PROPERTIES OF WEAK SANDSTONES , 1986 .

[13]  F. Bell.  The physical and mechanical properties of the fell sandstones, Northumberland, England , 1978 .

[14]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[15]  Yu-Hsing Wang,et al.  A particulate-scale investigation of cemented sand behavior , 2008 .

[16]  A. Ersoy,et al.  Textural characterisation of rocks , 1995 .

[17]  Meng-Chia Weng,et al.  Microscopic characteristics of problematic tertiary sandstone as revealed by grain-wide local deformation , 2009 .

[18]  Candan Gokceoglu,et al.  Prediction of uniaxial compressive strength of sandstones using petrography-based models , 2008 .

[19]  Masanobu Oda,et al.  Effects of induced anisotropy on the development of shear bands in granular materials , 1998 .

[20]  Yo-Ming Hsieh,et al.  Interpretations on how the macroscopic mechanical behavior of sandstone affected by microscopic properties—Revealed by bonded-particle model , 2008 .

[21]  F. Kulhawy,et al.  A comparative evaluation of rock strength measures , 1984 .

[22]  R. P. Young,et al.  Bonded-particle modeling of thermally fractured granite , 2008 .

[23]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[24]  Malcolm D. Bolton,et al.  Crushing and plastic deformation of soils simulated using DEM , 2004 .

[25]  L. Dobereiner,et al.  Evaluating the strength and deformability of sandstones , 1991, Quarterly Journal of Engineering Geology.

[26]  Catherine O'Sullivan,et al.  Exploring the macro- and micro-scale response of an idealised granular material in the direct shear apparatus , 2006 .

[27]  F. G. Bell,et al.  The petrographic and geomechanical properties of some sandstones from the Newspaper Member of the Natal Group near Durban, South Africa , 1999 .

[28]  V. Palchik,et al.  The influence of grain size and porosity on crack initiation stress and critical flaw length in dolomites , 1997 .

[29]  Fu-Shu Jeng,et al.  Influence of petrographic parameters on geotechnical properties of tertiary sandstones from Taiwan , 2004 .

[30]  R. Nova,et al.  DEM analysis of bonded granular geomaterials , 2008 .

[31]  Jayan S Vinod,et al.  Evaluation of undrained response from drained triaxial shear tests: DEM simulations and Experiments , 2008 .

[32]  N. Sabatakakis,et al.  Index properties and strength variation controlled by microstructure for sedimentary rocks , 2008 .

[33]  A. Fakhimi,et al.  Discrete element analysis of the effect of pore size and pore distribution on the mechanical behavior of rock , 2011 .

[34]  Fulvio Tonon,et al.  Modeling Lac du Bonnet granite using a discrete element model , 2009 .

[35]  N. S. Rad,et al.  CEMENTED SANDS UNDER STATIC LOADING , 1981 .

[36]  A microstructure-based failure criterion for Aminadav dolomites , 1998 .

[37]  Stein Sture,et al.  Sand Shear Band Thickness Measurements by Digital Imaging Techniques , 1999 .

[38]  F. Donze,et al.  Identification and Validation of a Discrete Element Model for Concrete , 2004 .

[39]  A. Shakoor,et al.  Relationship Between Petrographic Characteristics, Engineering Index Properties, and Mechanical Properties of Selected Sandstones , 1991 .

[40]  S. Singh.  Relationship among fatigue strength, mean grain size and compressive strength of a rock , 1988 .

[41]  J. Walsh,et al.  The impact of porosity and crack density on the elasticity, strength and friction of cohesive granular materials : insights from DEM modelling , 2009 .