13.3 A SAW-less reconfigurable multimode transmitter with a voltage-mode harmonic-reject mixer in 14nm FinFET CMOS

Multimode cellular RFICs need high dynamic range in order to simultaneously satisfy the high linearity requirements of LTE and the low-noise performance of 2G. Traditionally, SAW filters are employed to relax the noise-linearity trade-off at the cost of higher BOM. In a highly competitive market, mobile devices need to support >35 LTE bands, a number which is expected to rise further in the future, providing a strong motivation for SAW-less transmitter (TX) design. An LTE TX operating in the single resource-block (RB) mode is susceptible to spurious out-of-band (OOB) emission due to the high power spectral density concentrated in narrow bandwidths at frequency offsets as large as 4.5MHz (LTE10) or 9MHz (LTE20) from the carrier [1]. The most challenging condition is for B13 where the 3rd-order counter intermodulation (CIM3) product falls in an adjacent public-safety band. With 23dBm at the antenna, a B13-TX must ensure OOB emission less than −57dBm/6.25kHz in the public safety band.

[1]  Jan Craninckx,et al.  A multiband 40nm CMOS LTE SAW-less modulator with −60dBc C-IM3 , 2013, 2013 IEEE International Solid-State Circuits Conference Digest of Technical Papers.

[2]  Ahmad Mirzaei,et al.  A Rel-12 2G/3G/LTE-Advanced 2CC Transmitter , 2015, IEEE Journal of Solid-State Circuits.

[3]  Li Lin,et al.  A 1.75 GHz highly-integrated narrow-band CMOS transmitter with harmonic-rejection mixers , 2001, 2001 IEEE International Solid-State Circuits Conference. Digest of Technical Papers. ISSCC (Cat. No.01CH37177).

[4]  Siddharth Seth,et al.  A Dynamically Biased Multiband 2G/3G/4G Cellular Transmitter in 28 nm CMOS , 2016, IEEE Journal of Solid-State Circuits.

[5]  Bing Xu,et al.  9.7 An LTE SAW-less transmitter using 33% duty-cycle LO signals for harmonic suppression , 2015, 2015 IEEE International Solid-State Circuits Conference - (ISSCC) Digest of Technical Papers.