Space-Vector-Based Hybrid PWM Technique to Reduce Peak-to-Peak Torque Ripple in Induction Motor Drives
暂无分享,去创建一个
[1] Ahmed Masmoudi,et al. Bus-Clamping-Based DTC: An Attempt to Reduce Harmonic Distortion and Switching Losses , 2013, IEEE Transactions on Industrial Electronics.
[2] G. Narayanan,et al. Experimental Investigation on the Effect of Advanced Bus-Clamping Pulsewidth Modulation on Motor Acoustic Noise , 2013, IEEE Transactions on Industrial Electronics.
[3] G. Narayanan,et al. Space-Vector-Based Hybrid PWM Technique to Reduce Peak-to-Peak Torque Ripple in Induction Motor Drives , 2014, IEEE Transactions on Industry Applications.
[4] J. Kolar,et al. Influence of the modulation method on the conduction and switching losses of a PWM converter system , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.
[5] Marian P. Kazmierkowski,et al. Direct torque control of PWM inverter-fed AC motors - a survey , 2004, IEEE Transactions on Industrial Electronics.
[6] Raja Ayyanar,et al. Switching loss characteristics of sequences involving active state division in space vector based PWM , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..
[7] G. Narayanan,et al. A Quick-Simulation Tool for Induction Motor Drives Controlled Using Advanced Space-Vector-Based PWM Techniques , 2013 .
[8] Yongchang Zhang,et al. Generalized Two-Vector-Based Model-Predictive Torque Control of Induction Motor Drives , 2015, IEEE Transactions on Power Electronics.
[9] A.M. Khambadkone,et al. Torque ripple analysis and dynamic performance of a space vector modulation based control method for AC-drives , 2005, IEEE Transactions on Power Electronics.
[10] Rajapandian Ayyanar,et al. Space-Vector-Based Hybrid Pulsewidth Modulation Techniques for Reduced Harmonic Distortion and Switching Loss , 2010, IEEE Transactions on Power Electronics.
[11] Ming-Ji Yang,et al. Global Minimum Torque Ripple Design for Direct Torque Control of Induction Motor Drives , 2010, IEEE Transactions on Industrial Electronics.
[12] Saad Mekhilef,et al. A 12-Sector Space Vector Switching Scheme for Performance Improvement of Matrix-Converter-Based DTC of IM Drive , 2015, IEEE Transactions on Power Electronics.
[13] Peter Vas,et al. Sensorless vector and direct torque control , 1998 .
[14] Yoshihiro Murai,et al. New PWM Method for Fully Digitized Inverters , 1987, IEEE Transactions on Industry Applications.
[15] Hiralal M. Suryawanshi,et al. Closed-loop hybrid direct torque control for medium voltage induction motor drive for performance improvement , 2014 .
[16] Di Zhao,et al. Advanced bus-clamping PWM techniques based on space vector approach , 2006, IEEE Transactions on Power Electronics.
[17] V. Ranganathan,et al. Analytical evaluation of harmonic distortion in PWM AC drives using the notion of stator flux ripple , 2005, IEEE Transactions on Power Electronics.
[18] Pablo Correa,et al. A Predictive Torque Control for Inverter-fed Induction Machines , 2007, 2005 IEEE 36th Power Electronics Specialists Conference.
[19] G. Narayanan,et al. Reduction of Torque Ripple in Induction Motor Drives Using an Advanced Hybrid PWM Technique , 2010, IEEE Transactions on Industrial Electronics.
[20] Thomas A. Lipo,et al. Pulse Width Modulation for Power Converters: Principles and Practice , 2003 .
[21] Saad Mekhilef,et al. Predictive indirect matrix converter fed torque ripple minimization with weighting factor optimization , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).
[22] H. van der Broeck,et al. Analysis and Realization of a Pulse Width Modulator Based on Voltage Space Vectors , 1986, 1986 Annual Meeting Industry Applications Society.
[23] Ahmet M. Hava,et al. Simple Analytical and Graphical Methods for Carrier-Based PWM-VSI Drives , 1999 .
[24] V. T. Ranganathan,et al. Sensorless field-oriented control for double-inverter-fed wound-rotor induction motor drive , 2004, IEEE Transactions on Industrial Electronics.
[25] Saad Mekhilef,et al. Imposed Weighting Factor Optimization Method for Torque Ripple Reduction of IM Fed by Indirect Matrix Converter with Predictive Control Algorithm , 2015 .
[26] Joachim Holtz,et al. Sensorless control of induction motor drives , 2002, Proc. IEEE.
[27] Yongchang Zhang,et al. Model Predictive Torque Control of Induction Motor Drives With Optimal Duty Cycle Control , 2014, IEEE Transactions on Power Electronics.
[28] Xu Han,et al. VFD Machinery Vibration Fatigue Life and Multilevel Inverter Effect , 2013 .
[29] Yoshitaka Iwaji,et al. Introduction of the Harmonic Distortion Determining Factor and Its Application to Evaluating Real Time PWM Inverters , 1995, IEEE Transactions on Industry Applications.
[30] Shailendra Jain,et al. Torque ripple reduction technique with improved flux response for a direct torque control induction motor drive , 2013 .
[31] Yuan Ren,et al. Direct Torque Control of Permanent-Magnet Synchronous Machine Drives With a Simple Duty Ratio Regulator , 2014, IEEE Transactions on Industrial Electronics.
[32] Saad Mekhilef,et al. Model Predictive Torque Ripple Reduction with Weighting Factor Optimization Fed by an Indirect Matrix Converter , 2014 .
[33] Changliang Xia,et al. A Novel Direct Torque Control of Matrix Converter-Fed PMSM Drives Using Duty Cycle Control for Torque Ripple Reduction , 2014, IEEE Transactions on Industrial Electronics.
[34] M. Sanada,et al. A PWM strategy for reducing torque-ripple in inverter-fed induction motor , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.
[35] Tobias Geyer,et al. Analytical expression of pulsating torque harmonics due to PWM drives , 2013, 2013 IEEE Energy Conversion Congress and Exposition.
[36] Jan Verveckken,et al. Predictive Direct Torque Control for Flux and Torque Ripple Reduction , 2010, IEEE Transactions on Industrial Electronics.
[37] G. Narayanan,et al. Minimization of Torque Ripple in PWM AC Drives , 2009, IEEE Transactions on Industrial Electronics.
[38] G. Narayanan,et al. Minimum switching loss pulse width modulation for reduced power conversion loss in reactive power compensators , 2014 .