Dynamic Strain Aging Behaviour in AISI 316L Austenitic Stainless Steel under As-Received and As-Welded Conditions

In the current study, dynamic strain ageing (DSA) phenomena in 316L austenitic stainless steel was investigated under as-received and as-welded conditions. A tensile test was carried out on as-received and as-welded samples for the temperatures of 25–800 °C at a strain rate of 1 × 10−3 s−1. Microstructure and fracture surfaces were investigated by optic and scanning electron microscopes (SEM). 316L austenitic stainless steel showed different DSA behavior under as-received and as-welded conditions, which are discussed in terms of microstructure and mechanical properties.

[1]  Mario Fontana,et al.  Elevated temperature mechanical properties of solid section structural steel , 2017 .

[2]  Ming-Liang Zhu,et al.  Correlation of local strain with microstructures around fusion zone of a Cr-Ni-Mo-V steel welded joint , 2017 .

[3]  C. Bathias,et al.  Some metallurgical aspects of Dynamic Strain Aging effect on the Low Cycle Fatigue behavior of C–Mn steels , 2015 .

[4]  Hae-woo Lee,et al.  Effect of Cr Content on Microstructure and Mechanical Properties of Low Carbon Steel Welds , 2015, International Journal of Electrochemical Science.

[5]  G. Rohrer,et al.  Heat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels , 2015 .

[6]  R. Kaibyshev,et al.  Microstructure evolution in a 316L stainless steel subjected to multidirectional forging and unidirectional bar rolling , 2014 .

[7]  Xu Chen,et al.  Role of dynamic strain aging in the tensile property, cyclic deformation and fatigue behavior of Z2CND18.12N stainless steel between 293 K and 723 K , 2012 .

[8]  R. Song,et al.  Characteristics of Mechanical Properties and Microstructure for 316L Austenitic Stainless Steel , 2011 .

[9]  I. Solomon,et al.  Deformation induced martensite in AISI 316 stainless steel , 2010 .

[10]  J. Hallen,et al.  Metallurgical investigation of the aging process on tensile fracture welded joints in pipeline steel , 2009 .

[11]  Süleyman Gündüz,et al.  The effect of process parameter on the properties of spot welded cold deformed AISI304 grade austenitic stainless steel , 2009 .

[12]  U. Ramamurty,et al.  Dynamic strain ageing in Ni-base superalloy 720Li , 2009 .

[13]  G. Ananthakrishna,et al.  Current theoretical approaches to collective behavior of dislocations , 2007 .

[14]  John C. Lippold,et al.  Welding Metallurgy and Weldability of Stainless Steels , 2005 .

[15]  Seong-Gu Hong,et al.  The tensile and low-cycle fatigue behavior of cold worked 316L stainless steel: influence of dynamic strain aging , 2004 .

[16]  S. Gündüz.  Dynamic strain aging effects in niobium microalloyed steel , 2002 .

[17]  B. M. Gonzalez,et al.  Strain aging of AISI 430 ferritic stainless steel , 1997 .

[18]  M. Ivanchenko.  Dynamic strain aging of austenitic stainless steels and Ni-base alloys , 2010 .

[19]  L. Kosec,et al.  Mechanical properties and microstructure of austenitic stainless steel after welding and post-weld heat treatment , 2009 .

[20]  H. Hänninen,et al.  Dynamic Strain Ageing and EAC of Deformed Nitrogen-alloyed AISI 316 Stainless Steels , 2007 .

[21]  L. Kosec,et al.  The effect of annealing on properties of AISI 316L base and weld metals , 2007 .