Detection of System Compromise in Additive Manufacturing Using Video Motion Magnification

[1]  Marc M. Van Hulle,et al.  A phase-based approach to the estimation of the optical flow field using spatial filtering , 2002, IEEE Trans. Neural Networks.

[2]  Dazhong Wu,et al.  Digital design and manufacturing on the cloud: A review of software and services—RETRACTED , 2017, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.

[3]  Conrad S. Tucker,et al.  Bounded Kalman filter method for motion-robust, non-contact heart rate estimation. , 2018, Biomedical optics express.

[4]  Arquimedes Canedo,et al.  Poster Abstract: Thermal Side-Channel Forensics in Additive Manufacturing Systems , 2016, 2016 ACM/IEEE 7th International Conference on Cyber-Physical Systems (ICCPS).

[5]  Edward William Reutzel,et al.  (Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing , 2015 .

[6]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[7]  Jeremy Straub,et al.  Identifying positioning-based attacks against 3D printed objects and the 3D printing process , 2017, Defense + Security.

[8]  Frédo Durand,et al.  Phase-based video motion processing , 2013, ACM Trans. Graph..

[9]  Kim-Kwang Raymond Choo,et al.  A Data Exfiltration and Remote Exploitation Attack on Consumer 3D Printers , 2016, IEEE Transactions on Information Forensics and Security.

[10]  P. D'urso,et al.  Application of a 3D custom printed patient specific spinal implant for C1/2 arthrodesis. , 2016, Journal of spine surgery.

[11]  Charles R. Farrar,et al.  A summary review of vibration-based damage identification methods , 1998 .

[12]  Frédo Durand,et al.  Modal identification of simple structures with high-speed video using motion magnification , 2015 .

[13]  Jayanth N. Kudva,et al.  Smart structures concepts for aircraft structural health monitoring , 1993, Smart Structures.

[14]  José Pedro Sousa,et al.  Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing , 2018 .

[15]  Yan Wang,et al.  In situ monitoring of FDM machine condition via acoustic emission , 2015 .

[16]  Rafal Rohozinski,et al.  Stuxnet and the Future of Cyber War , 2011 .

[17]  Richard Leach,et al.  Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .

[18]  Yuval Elovici,et al.  dr0wned - Cyber-Physical Attack with Additive Manufacturing , 2016, WOOT.

[19]  David J. Fleet,et al.  Computation of component image velocity from local phase information , 1990, International Journal of Computer Vision.

[20]  Mark Yampolskiy,et al.  Vulnerability analysis of desktop 3D printer software , 2016, 2016 Resilience Week (RWS).

[21]  Richard J. Bibb,et al.  Computed tomography characterisation of additive manufacturing materials. , 2011, Medical engineering & physics.

[22]  du PlessisAnton,et al.  Quality Control of a Laser Additive Manufactured Medical Implant by X-Ray Tomography , 2016 .

[23]  Dazhong Wu,et al.  Cybersecurity for digital manufacturing , 2018, Journal of Manufacturing Systems.

[24]  Jan Simota,et al.  Aspects of Risk Management Implementation for Industry 4.0 , 2017 .

[25]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[26]  Dale Peterson,et al.  Offensive Cyber Weapons: Construction, Development, and Employment , 2013 .

[27]  Jae-Hung Han,et al.  Frequency-based damage detection in cantilever beam using vision-based monitoring system with motion magnification technique , 2018, Journal of Intelligent Material Systems and Structures.

[28]  B. Colosimo,et al.  Process defects and in situ monitoring methods in metal powder bed fusion: a review , 2017 .

[29]  Fei Chen,et al.  Security features embedded in computer aided design (CAD) solid models for additive manufacturing , 2017 .

[30]  Young B. Moon,et al.  Detecting cyber-physical attacks in CyberManufacturing systems with machine learning methods , 2017, Journal of Intelligent Manufacturing.

[31]  Gary B. Wills,et al.  Approaches to maintaining provenance throughout the additive manufacturing process , 2013, World Congress on Internet Security (WorldCIS-2013).

[32]  Charles R. Farrar,et al.  Reference-free detection of minute, non-visible, damage using full-field, high-resolution mode shapes output-only identified from digital videos of structures , 2018 .

[33]  A. Torralba,et al.  Motion magnification , 2005, SIGGRAPH 2005.

[34]  Timothy W. Simpson,et al.  Development of CAD-Integrated Cost Estimator to Support Design for Additive Manufacturing , 2017 .

[35]  Sunil C. Joshi,et al.  3D printing in aerospace and its long-term sustainability , 2015 .

[36]  Aparna Gupta,et al.  Strategically optimum maintenance of monitoring‐enabled multi‐component systems using continuous‐time jump deterioration models , 2006 .

[37]  A. F. Silva,et al.  Fused deposition modeling with polypropylene , 2015 .

[38]  Jules White,et al.  Bad Parts: Are Our Manufacturing Systems at Risk of Silent Cyberattacks? , 2015, IEEE Security & Privacy.

[39]  Arquimedes Canedo,et al.  KCAD: Kinetic Cyber-attack detection method for Cyber-physical additive manufacturing systems , 2016, 2016 IEEE/ACM International Conference on Computer-Aided Design (ICCAD).

[40]  Chris Hankin,et al.  Decision support approaches for cyber security investment , 2015, Decis. Support Syst..

[41]  Aral Sarrafi,et al.  Using 2D Phase-Based Motion Estimation and Video Magnification for Binary Damage Identification on a Wind Turbine Blade , 2019 .

[42]  Ralph Langner,et al.  Stuxnet: Dissecting a Cyberwarfare Weapon , 2011, IEEE Security & Privacy.

[43]  Karel Raz,et al.  Determination of FDM Printer Settings with Regard to Geometrical Accuracy , 2017 .

[44]  Charles R. Farrar,et al.  Blind identification of full-field vibration modes from video measurements with phase-based video motion magnification , 2017 .

[45]  Ben Dutton,et al.  Evaluation of laser ultrasonic testing for inspection of metal additive manufacturing , 2015, Photonics West - Lasers and Applications in Science and Engineering.

[46]  Xiaodong Li,et al.  In situ real time defect detection of 3D printed parts , 2017 .

[47]  Derek Nowrouzezahrai,et al.  Learning hatching for pen-and-ink illustration of surfaces , 2012, TOGS.

[48]  Shashi Phoha,et al.  Application of supervised machine learning for defect detection during metallic powder bed fusion additive manufacturing using high resolution imaging. , 2018 .

[49]  B. S. Pabla,et al.  Condition based maintenance of machine tools—A review , 2015 .

[50]  Dieter Roller,et al.  Vision based error detection for 3D printing processes , 2016 .

[51]  Arquimedes Canedo,et al.  Acoustic Side-Channel Attacks on Additive Manufacturing Systems , 2016, 2016 ACM/IEEE 7th International Conference on Cyber-Physical Systems (ICCPS).

[52]  Jules White,et al.  Cyber-physical vulnerabilities in additive manufacturing systems: A case study attack on the .STL file with human subjects , 2017 .

[53]  Nektarios Georgios Tsoutsos,et al.  INVITED: ObfusCADe: Obfuscating additive manufacturing CAD models against counterfeiting , 2017, 2017 54th ACM/EDAC/IEEE Design Automation Conference (DAC).

[54]  F. Yuan,et al.  Damage Detection of a Plate Using Migration Technique , 2001 .

[55]  Jia Liu,et al.  Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors , 2015 .

[56]  S. Longhi,et al.  Respiratory rate detection algorithm based on RGB-D camera: theoretical background and experimental results. , 2014, Healthcare technology letters.

[57]  Nektarios Georgios Tsoutsos,et al.  Manufacturing and Security Challenges in 3D Printing , 2016 .

[58]  Smith,et al.  Mathematics of the Discrete Fourier Transform (DFT) with Audio Applications , 2007 .

[59]  Shing I. Chang,et al.  Automated Process Monitoring in 3D Printing Using Supervised Machine Learning , 2018 .

[60]  Richard K. Leach,et al.  X-ray computed tomography for additive manufacturing: a review , 2016 .

[61]  Jeffrey N. Schoess,et al.  Aircraft structural health monitoring system development: overview of the Air Force/Navy smart metallic structures program , 1995, Smart Structures.

[62]  G. Owolabi,et al.  Crack detection in beams using changes in frequencies and amplitudes of frequency response functions , 2003 .

[63]  Arquimedes Canedo,et al.  Confidentiality Breach Through Acoustic Side-Channel in Cyber-Physical Additive Manufacturing Systems , 2017, ACM Trans. Cyber Phys. Syst..

[64]  Xiaoqing Frank Liu,et al.  Design and Implementation of Cyber-Physical Manufacturing Cloud Using MTConnect , 2016 .

[65]  Frédo Durand,et al.  Eulerian video magnification for revealing subtle changes in the world , 2012, ACM Trans. Graph..