Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries

Solid-state electrolytes with high room-temperature ionic conductivity and fast interfacial charge transport are a requirement for practical solid-state batteries. Here, we report that cationic aluminium species initiate ring-opening polymerization of molecular ethers inside an electrochemical cell to produce solid-state polymer electrolytes (SPEs), which retain conformal interfacial contact with all cell components. SPEs exhibit high ionic conductivity at room temperature (>1 mS cm−1), low interfacial resistances, uniform lithium deposition and high Li plating/striping efficiencies (>98% after 300 charge–discharge cycles). Applications of SPEs in Li–S, Li–LiFePO4 and Li–LiNi0.6Mn0.2Co0.2O2 batteries further demonstrate that high Coulombic efficiency (>99%) and long life (>700 cycles) can be achieved with an in situ SPE design. Our study therefore provides a promising direction for creating solid electrolytes that meet both the bulk and interfacial conductivity requirements for practical solid polymer batteries.High-performance polymer electrolytes are highly sought after in the development of solid-state batteries. Lynden Archer and co-workers report an in situ polymerization of liquid electrolytes in a lithium battery for creating promising polymer electrolytes with high ionic conductivity and low interfacial resistance.

[1]  Liquan Chen,et al.  Spectroscopic studies on interactions and microstructures in propylene carbonate—LiTFSI electrolytes , 2001 .

[2]  Kang Xu,et al.  “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries , 2015, Science.

[3]  J. Tübke,et al.  In-Situ Raman Investigation of Polysulfide Formation in Li-S Cells , 2013 .

[4]  Heng Zhang,et al.  Single Lithium-Ion Conducting Polymer Electrolytes Based on a Super-Delocalized Polyanion. , 2016, Angewandte Chemie.

[5]  Seong H. Kim,et al.  Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium-Sulfur Batteries. , 2018, ACS nano.

[6]  Wei Luo,et al.  Promises, Challenges, and Recent Progress of Inorganic Solid‐State Electrolytes for All‐Solid‐State Lithium Batteries , 2018, Advanced materials.

[7]  Piercarlo Mustarelli,et al.  Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives. , 2011, Chemical Society reviews.

[8]  Xingyi Zhou,et al.  A 3D Nanostructured Hydrogel-Framework-Derived High-Performance Composite Polymer Lithium-Ion Electrolyte. , 2018, Angewandte Chemie.

[9]  Bing Sun,et al.  Toward Solid-State 3D-Microbatteries Using Functionalized Polycarbonate-Based Polymer Electrolytes. , 2018, ACS applied materials & interfaces.

[10]  Zhiqiang Zhu,et al.  All-solid-state lithium organic battery with composite polymer electrolyte and pillar[5]quinone cathode. , 2014, Journal of the American Chemical Society.

[11]  G. Rubloff,et al.  Electrochemically Controlled Solid Electrolyte Interphase Layers Enable Superior Li-S Batteries. , 2018, ACS applied materials & interfaces.

[12]  Jan D. Miller,et al.  Natural halloysite nano-clay electrolyte for advanced all-solid-state lithium-sulfur batteries , 2017 .

[13]  Yan‐Bing He,et al.  Dendrite‐Free, High‐Rate, Long‐Life Lithium Metal Batteries with a 3D Cross‐Linked Network Polymer Electrolyte , 2017, Advanced materials.

[14]  Li Yang,et al.  Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis , 2006 .

[15]  Y. Yamashita,et al.  Polymerization of 1,3‐dioxolane , 1964 .

[16]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[17]  Lynden A Archer,et al.  Stable lithium electrodeposition in liquid and nanoporous solid electrolytes. , 2014, Nature materials.

[18]  K. Shull,et al.  Extreme strain localization and sliding friction in physically associating polymer gels. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[19]  Yu Zhu,et al.  A Superionic Conductive, Electrochemically Stable Dual-Salt Polymer Electrolyte , 2018, Joule.

[20]  Arumugam Manthiram,et al.  Lithium battery chemistries enabled by solid-state electrolytes , 2017 .

[21]  Rui Zhang,et al.  Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review. , 2017, Chemical reviews.

[22]  S. Choudhury,et al.  Nanoporous Hybrid Electrolytes for High‐Energy Batteries Based on Reactive Metal Anodes , 2017 .

[23]  Christopher Y. Li,et al.  Correlating Electrode–Electrolyte Interface and Battery Performance in Hybrid Solid Polymer Electrolyte‐Based Lithium Metal Batteries , 2017 .

[24]  S. Choudhury,et al.  Stabilizing Protic and Aprotic Liquid Electrolytes at High-Bandgap Oxide Interphases , 2018, Chemistry of Materials.

[25]  J. Owen,et al.  Ion Speciation and Transport Properties of LiTFSI in 1,3-Dioxolane Solutions: A Case Study for Li-S Battery Applications. , 2018, The journal of physical chemistry. B.

[26]  Doron Aurbach,et al.  On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries , 2009 .

[27]  M Stanley Whittingham,et al.  Ultimate limits to intercalation reactions for lithium batteries. , 2014, Chemical reviews.

[28]  Yu-Guo Guo,et al.  An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes , 2016, Advanced materials.

[29]  F. Beyer,et al.  Polymerized ionic liquid diblock copolymer as solid-state electrolyte and separator in lithium-ion battery , 2016 .

[30]  Jian-jun Zhang,et al.  A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery , 2018 .

[31]  Kevin N. Wood,et al.  Dendrites and Pits: Untangling the Complex Behavior of Lithium Metal Anodes through Operando Video Microscopy , 2016, ACS central science.

[32]  Yi Cui,et al.  Materials for lithium-ion battery safety , 2018, Science Advances.

[33]  Masamichi Kobayashi,et al.  Crystal vibrations of poly-1,3-dioxolane crystal form II and treatment of statistical errors due to uncertainties in the atomic positions , 1975 .

[34]  Shengbo Zhang,et al.  Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte , 2012 .

[35]  Zachary D. Hood,et al.  Li2OHCl Crystalline Electrolyte for Stable Metallic Lithium Anodes. , 2016, Journal of the American Chemical Society.

[36]  Yi Cui,et al.  Reviving the lithium metal anode for high-energy batteries. , 2017, Nature nanotechnology.

[37]  S. Choudhury,et al.  Electrochemical Interphases for High-Energy Storage Using Reactive Metal Anodes. , 2018, Accounts of chemical research.

[38]  M. Armand,et al.  Building better batteries , 2008, Nature.

[39]  Doron Aurbach,et al.  Promise and reality of post-lithium-ion batteries with high energy densities , 2016 .

[40]  O. Borodin,et al.  High rate and stable cycling of lithium metal anode , 2015, Nature Communications.

[41]  T. Leichtweiss,et al.  Dynamic formation of a solid-liquid electrolyte interphase and its consequences for hybrid-battery concepts. , 2016, Nature chemistry.

[42]  H. Sardón,et al.  Single Ion Conducting Polymer Electrolytes Based On Versatile Polyurethanes , 2017 .

[43]  Shaofei Wang,et al.  Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte. , 2016, Journal of the American Chemical Society.

[44]  Yayuan Liu,et al.  Ultrahigh–current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF3 framework , 2017, Science Advances.

[45]  A. Stephan,et al.  Review on gel polymer electrolytes for lithium batteries , 2006 .

[46]  M. Winter,et al.  Self-Assembled Block Copolymer Electrolytes: Enabling Superior Ambient Cationic Conductivity and Electrochemical Stability , 2018, Chemistry of Materials.

[47]  Daniel Brandell,et al.  Allyl Ethers as Combined Plasticizing and Crosslinkable Side Groups in Polycarbonate-Based Polymer Electrolytes for Solid-State Li Batteries , 2016 .

[48]  Jun Liu,et al.  Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries , 2018, Nature Energy.

[49]  P. Novák,et al.  A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries , 2010 .

[50]  B. Polzin,et al.  Fluorinated Electrolytes for 5-V Li-Ion Chemistry: Probing Voltage Stability of Electrolytes with Electrochemical Floating Test , 2015 .

[51]  Martin Z. Bazant,et al.  Transition of lithium growth mechanisms in liquid electrolytes , 2016 .

[52]  C. Gerbaldi,et al.  Truly quasi-solid-state lithium cells utilizing carbonate free polymer electrolytes on engineered LiFePO4 , 2016 .

[53]  Lynden A. Archer,et al.  Design principles for electrolytes and interfaces for stable lithium-metal batteries , 2016, Nature Energy.