Establishment of tensile failure induced sanding onset prediction model for cased-perforated gas wells

Abstract Sand production is a challenging issue in upstream oil and gas industry, causing operational and safety problems. Therefore, before drilling the wells, it is essential to predict and evaluate sanding onset of the wells. In this paper, new poroelastoplastic stress solutions around the perforation tunnel and tip based on the Mohr–Coulomb criterion are presented firstly. Based on the stress models, a tensile failure induced sanding onset prediction model for cased-perforated gas wells is derived. Then the analytical model is applied to field data to verify its applicability. The results from the perforation tip tensile failure induced sanding model are very close to field data. Therefore, this model is recommended for forecasting the critical conditions of sand production analysis. Such predictions are necessary for providing technical support for sand control decision-making and predicting the production condition at which sanding onset occurs.

[1]  F. J. Santarelli,et al.  Skin Self-Cleaning in High-Rate Oil Wells Using Sand Management , 2000 .

[2]  Shenglai Yang,et al.  Experimental investigation on permeability evolution law during sand production process of weak sandstone , 2014 .

[3]  Rolf K. Bratli,et al.  Stability and Failure of Sand Arches , 1981 .

[4]  Jincai Zhang,et al.  Optimized perforation tunnel geometry, density and orientation to control sand production , 2007 .

[5]  C. Lévi-Strauss,et al.  Experimental investigation , 2013 .

[6]  E. Fjaer,et al.  Petroleum Related Rock Mechanics , 1992 .

[7]  T. W. Knudsen,et al.  REALISTIC SAND PRODUCTION PREDICTION: NUMERICAL APPROACH. , 1989 .

[8]  Xianjie Yi,et al.  Numerical and analytical modeling of sanding onset prediction , 2004 .

[9]  J. M. Peden,et al.  The Prediction of Operating Conditions To Constrain Sand Production From a Gas Well , 1991 .

[10]  F. J. Santarelli,et al.  Analysis of Borehole stresses using pressure-dependent, linear elasticity , 1986 .

[11]  C. J. Kenter,et al.  A New Concept of Sand Production Prediction: Theory and Laboratory Experiments , 2000 .

[12]  Per Horsrud,et al.  Sand Stresses Around a Wellbore , 1982 .

[13]  A. L. Florence,et al.  Axisymmetric compression of a Mohr–Coulomb medium around a circular hole , 1978 .

[14]  Seehong Ong,et al.  Sand Production Prediction in High Rate, Perforated and Open-hole Gas Wells , 2000 .

[15]  Euripides Papamichos,et al.  A New Concept of Sand Production Prediction: Theory and Laboratory Experiments , 2000 .

[16]  Y. Wang,et al.  Predicting the effects of pore pressure penetration on the extent of wellbore instability: Application of a versatile poro-elastoplastic model , 1994 .

[17]  Y. Wang,et al.  Borehole collapse and sand production evaluation: Experimental testing, analytical solutions and field implications , 2001 .

[18]  S. C. Jones.  Using the Inertial Coefficient, B, To Characterize Heterogeneity in Reservoir Rock , 1987 .

[19]  Giorgio Volonte,et al.  Sand Prediction: A Practical Finite-Element 3D Approach for Real Field Applications , 2013 .

[20]  I. Bradford,et al.  A semi-analytic elastoplastic model for wellbore stability with applications to sanding , 1994 .

[21]  Richard Wan,et al.  Prediction of Volumetric Sand Production and Wellbore Stability Analysis of a Well at Different Completion Schemes , 2005 .

[22]  Sherif Adel Akl,et al.  Wellbore instability mechanisms in clays , 2010 .

[23]  P. Valko,et al.  Predicting Critical Drawdown for the Onset of Sand Production , 2004 .

[24]  Richard Wan,et al.  Analysis of Sand Production in Unconsolidated Oil Sand Using a Coupled Erosional-Stress-Deformation Model , 2001 .

[25]  T. K. Perkins,et al.  Prediction of Sand Production in Gas Wells: Methods and Gulf of Mexico Case Studies , 1995 .

[26]  Vahidoddin Fattahpour,et al.  An experimental investigation on the effect of rock strength and perforation size on sand production , 2012 .

[27]  Khalil Rahman,et al.  Minimizing Sanding Risk by Optimizing Well and Perforation Trajectory Using an Integrated Geomechanical and Passive Sand-Control Approach , 2008 .