On Fluid Power Pump and Motor Design : Tools for Noise Reduction

Noise and vibration are two of the main drawbacks with fluid power  systems. The increasing requirements concerning working environment as well as machines' impact on surroundings put components an ...

[1]  D K Longmore,et al.  Transmission of Vibration and Pressure Fluctuations Through Hydraulic Hoses , 1991 .

[2]  K A Edge,et al.  A method to reduce noise in hydraulic systems by optimizing pipe clamp locations , 1998 .

[3]  Salvatore Manco,et al.  Modelling a Variable Displacement Axial Piston Pump in a Multibody Simulation Environment , 2007 .

[4]  D N Johnston,et al.  Simulation of the Pressure Ripple Characteristics of Hydraulic Circuits , 1989 .

[5]  Mats Åbom,et al.  Influence of errors on the two‐microphone method for measuring acoustic properties in ducts , 1986 .

[7]  Toru Yamazaki,et al.  Prediction of sound power radiated from oil hydraulic pump using FEM and BEM , 2003 .

[8]  Mahesh M. Athavale,et al.  Application of the Full Cavitation Model to Pumps and Inducers , 2002 .

[9]  Frank Visser,et al.  Demonstration and Validation of a 3D CFD Simulation Tool Predicting Pump Performance and Cavitation for Industrial Applications , 2009 .

[10]  Frank J. Fronczak,et al.  The Design of Low-Inertia, High-Speed External Gear Pump/Motors for Hydrostatic Dynamometer Systems , 2009 .

[11]  J S Stecki,et al.  Fluid Transmission Lines—Distributed Parameter Models Part 1: A Review of the State of the Art , 1986 .

[12]  Hubertus Murrenhoff,et al.  Theoretical considerations towards an actively controlled valve plate configuration , 2009 .

[13]  Seiichi Washio,et al.  Study of Unsteady Orifice Flow Characteristics in Hydraulic Oil Lines , 1996 .

[14]  D. Nigel Johnston,et al.  Prediction of Fluid Inertance in Nonuniform Passageways , 2006 .

[15]  Salvatore Manco,et al.  ADVANCES IN THE SIMULATION OF AXIAL PISTON PUMPS , 2002 .

[16]  Johan Andersson,et al.  Optimal design of the cross-angle for pulsation reduction in variable displacement pumps , 2002 .

[17]  F. K. Bannister,et al.  Pressure Transients in an Axial Piston Hydraulic Pump , 1974 .

[18]  Salvatore Manco,et al.  AN EXPERIENCE IN SIMULATION: THE CASE OF A VARIABLE DISPLACEMENT AXIAL PISTON PUMP , 1999 .

[19]  Monika Ivantysynova,et al.  Multi-objective Optimization Tool for Noise Reduction in Axial Piston Machines , 2008 .

[20]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[21]  D. A. Blaser,et al.  Transfer function method of measuring in-duct acoustic properties. I - Theory. II - Experiment , 1980 .

[22]  K A Edge,et al.  The fluid borne noise characteristics of a bent axis motor established using the 'secondary source' method , 1997 .

[23]  Petter Krus,et al.  Optimizing Optimization for Design Optimization , 2003, DAC 2003.

[24]  Aristides Kiprakis,et al.  Efficiency and dynamic performance of Digital Displacement™ hydraulic transmission in tidal current energy converters , 2007 .

[25]  J. A. Guin,et al.  Modification of the Complex Method of Constrained Optimization , 1968, Comput. J..

[26]  Andreas Johansson,et al.  Dynamic analysis of shuttle technique performance applied on hydraulic transformer , 2002 .

[27]  D N Johnston,et al.  Rating of pump fluid-borne noise. , 1994 .

[28]  D N Johnston,et al.  The Impedance Characteristics of Fluid Power Components: Relief Valves and Accumulators , 1991 .

[29]  F. J. Hatfield,et al.  Fluid Structure Interaction in Piping by Component Synthesis , 1982 .

[30]  Charles E. Martin,et al.  Periodic Fluid Flow through Circular Orifices , 1953 .

[31]  Göran Backlund.  The effects of modeling requirements in early phases of buyer-supplier relations , 2000 .

[32]  Arne Jansson,et al.  Fluid Power System Design - A Simulation Approach , 1994 .

[33]  K. A. Edge,et al.  A Theoretical Model of Axial Piston Pump Flow Ripple , 1988 .

[34]  D N Johnston,et al.  The Impedance Characteristics of Fluid Power Components: Restrictor and Flow Control Valves , 1991 .

[35]  Monika Ivantysynova,et al.  A NEW APPROACH TO THE DESIGN OF SEALING AND BEARING GAPS OF DISPLACEMENT MACHINES , 1999 .

[36]  K A Edge,et al.  A Study of Pressure Fluctuations in the Suction Lines of Positive Displacement Pumps , 1985 .

[37]  Johan Andersson,et al.  Influence from the cross-angle on piston forces and bending moments in variable hydraulic piston pumps , 2003 .

[38]  D N Johnston,et al.  Impedance Characteristics of Hydraulic Orifices , 1995 .

[39]  Jeroen Potma,et al.  Design and testing of an axial piston pump based on the floating cup principle , 2003 .

[40]  Matti Linjama,et al.  Digital Fluid Power – State of the Art , 2011 .

[41]  K A Edge,et al.  Reduction of axial piston pump pressure ripple , 2000 .

[42]  S. H. Salter,et al.  Modeling of Digital-Displacement Pump-Motors and Their Application as Hydraulic Drives for Nonuniform Loads , 2000 .

[43]  Mats Åbom,et al.  Error analysis of two‐microphone measurements in ducts with flow , 1988 .

[44]  Yu Jiang,et al.  A Three-Dimensional Design Tool for Crescent Oil Pumps , 2008 .

[45]  D N Johnston,et al.  The ‘Secondary Source’ Method for the Measurement of Pump Pressure Ripple Characteristics Part 1: Description of Method , 1990 .

[46]  T. A. Clark,et al.  A theoretical investigation of hydraulic noise in pumps , 1967 .

[47]  Y. Moon,et al.  Discrete Noise Prediction of Variable Pitch Cross-Flow Fans by Unsteady Navier-Stokes Computations , 2003 .

[48]  Peter Nordin,et al.  Hopsan NG, A C++ Implementation using the TLM Simulation Technique , 2010 .

[49]  Timo Koivula,et al.  ON CAVITATION IN FLUID POWER , 2000 .

[50]  R. A. Bajura,et al.  A Numerical Analysis of Pulsating Laminar Flow Through a Pipe Orifice , 1991 .

[51]  Heikki Kauranne,et al.  Experimental validation of different models for effective bulk modulus of hydraulic fluid , 2005 .

[52]  Toshiyuki Hayase,et al.  Numerical Analysis of Transient Flow through a Pipe Orifice. Time Constant for Settling Flow. , 1995 .

[53]  J S Stecki,et al.  Fluid Transmission Lines—Distributed Parameter Models Part 2: Comparison of Models , 1986 .

[54]  K. Weddfelt,et al.  Methods of Reducing Flow Ripple from Fluid Power Piston Pumps - an Experimental Approach , 1991 .

[55]  T. J. Viersma,et al.  Analysis, Synthesis and Design of Hydraulic Servosystems and Pipelines , 1981 .

[56]  K A Edge,et al.  Reduction of piston pump pressure ripple , 1989 .

[57]  Andreas Johansson,et al.  A General Model of a Multi Displacement Machine using TLM SICFP' 01 , 2001 .

[58]  A. K. Singhal,et al.  Mathematical Basis and Validation of the Full Cavitation Model , 2002 .

[59]  J-O Palmberg,et al.  Experimental verification of cross-angle for noise reduction in hydraulic piston pumps , 2007 .

[60]  S R Hull,et al.  The Development of an Automatic Procedure for the Digital Simulation of Hydraulic Systems , 1985 .

[61]  Jan-Ove Palmberg,et al.  Methods of Reducing Flow Ripple from Fluid Power Pumps - a Theoretical Approach , 1991 .

[62]  D N Johnston,et al.  In-Situ Measurement of the Wavespeed and Bulk Modulus in Hydraulic Lines , 1991 .

[63]  K A Edge.  Designing quieter hydraulic systems - some recent developments and contributions (Invited keynote paper) , 1999 .

[64]  K A Edge,et al.  The ‘Secondary Source’ Method for the Measurement of Pump Pressure Ripple Characteristics Part 2: Experimental Results , 1990 .

[65]  Andreas Johansson.  Design principles for noise reduction in hydraulic piston pumps : simulation, optimisation and experimental verification , 2005 .

[66]  André Palmen.  Noise reduction of an axial piston pump by means of structural modification , 2004 .