Application of the level set method to the simulation of resin transfer molding

A new methodology is presented to simulate mold filling in resin transfer molding (RTM) using a combination of the level set and boundary element methods (BEMs). RTM is a composite manufacturing process where a liquid resin is injected in a closed rigid mold containing a dry fibrous reinforcement. Process simulation is motivated by the importance of tracking accurately the motion of the flow front during the mold filling stage. The BEM solves the equation governing the resin flow and the level set method is implemented to track the resin front in the mold. This formulation opens up new opportunities to improve RTM flow simulations and optimize injection molds. The present paper focuses on isothermal resin flow in undeformable porous medium. The implementation of the numerical algorithm is described and several examples of two-dimensional filling with single or multiple injection gates are presented. The robustness of the coupling and the ability to predict accurately the position of the front by this new model are discussed. It is also shown how dry spot formation can be tracked precisely during the simulation and how a generalization of this approach allows predicting resin flow across obstacles.

[1]  J A Sethian,et al.  A fast marching level set method for monotonically advancing fronts. , 1996, Proceedings of the National Academy of Sciences of the United States of America.

[2]  S. Osher,et al.  Efficient implementation of essentially non-oscillatory shock-capturing schemes,II , 1989 .

[3]  James A. Sethian,et al.  The Fast Construction of Extension Velocities in Level Set Methods , 1999 .

[4]  I. Bohachevsky,et al.  Finite difference method for numerical computation of discontinuous solutions of the equations of fluid dynamics , 1959 .

[5]  Chi-Wang Shu.  Total-variation-diminishing time discretizations , 1988 .

[6]  François Trochu,et al.  New Remeshing Applications in Resin Transfer Molding , 2005 .

[7]  J. Sethian.  Level set methods : evolving interfaces in geometry, fluid mechanics, computer vision, and materials science , 1996 .

[8]  Akbar Shojaei,et al.  Modeling and simulation approaches in the resin transfer molding process: A review , 2003 .

[9]  M. V. Bruschke,et al.  A finite element/control volume approach to mold filling in anisotropic porous media , 1990 .

[10]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[11]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[12]  F. Trochu,et al.  Adaptive mesh generation for mould filling problems in resin transfer moulding , 2003 .

[13]  E. Ruiz,et al.  Re-Meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding , 2004 .

[14]  S. Osher,et al.  Stable and entropy satisfying approximations for transonic flow calculations , 1980 .

[15]  F. Trochu,et al.  Numerical analysis of the resin transfer molding process by the finite element method , 1993 .

[16]  Carlos Alberto Brebbia,et al.  Boundary Elements: An Introductory Course , 1989 .

[17]  Rida T. Farouki,et al.  A shock‐tracking algorithm for surface evolution under reactive‐ion etching , 1993 .

[18]  Alex M. Andrew,et al.  Level Set Methods and Fast Marching Methods: Evolving Interfaces in Computational Geometry, Fluid Mechanics, Computer Vision, and Materials Science (2nd edition) , 2000 .