Prediction the Ultimate Longitudinal Strength of Intact Ship by Finite Element Method

This paper performed the approach to predict the ultimate longitudinal strength of intact ship by finite element method (FEM) on ABAQUS software. The reliability of this approach was estimated on the comparison between results of experiment models and finite element models. Thence, this approach will be applied on Double Hull VLCC(Very Large Crude Carrier)to predict the ultimate longitudinal strength in intact case.

[1]  Simone Wannemaker,et al.  Ship Structural Design A Rationally Based Computer Aided Optimization Approach , 2016 .

[2]  Owen F. Hughes,et al.  Ship Structural Design: A Rationally-based, Computer-aided, Optimization Approach , 1983 .

[3]  Yoshitaka Ogawa,et al.  Study on the residual ultimate longitudinal strength of hull girder of a bulk carrier against a sagging moment after ship collision , 2011 .

[4]  Wu Jia-men.  Development of 308000 dwt VLCC Compliant with Common Structural Rules for Double Hull Oil Tankers , 2008 .

[5]  Xiaobo Liu,et al.  Study on the Standardized Nonlinear Finite Element Analysis of the Ultimate Strength of Ship Hull Girder , 2009 .

[6]  Torgeir Moan,et al.  Ultimate Strength of a Capesize Bulk Carrier in Hogging and Alternate Hold Loading Condition , 2010 .

[7]  Joo-Sung Lee,et al.  Ultimate Longitudinal Strength Assessment of Ships' Hull Girders , 2008 .

[8]  Masahiko Fujikubo,et al.  Application of Idealized Structural Unit Method to Progressive Collapse Analysis of Ship¿s Hull Girder Under Longitudinal Bending , 2005 .

[9]  Yao Chen,et al.  EVALUATION OF THE LONGITUDINAL ULTIMATE STRENGTH OF VARIOUS SHIP HULL CONFIGURATIONS , 1985 .

[10]  S Nishihara.  ANALYSIS OF ULTIMATE STRENGTH OF STIFFENED RECTANGULAR PLATE. ON THE ULTIMATE BENDING MOMENT OF SHIP HULL GIRDER , 1983 .

[11]  Robert S. Dow.  TESTING AND ANALYSIS OF A 1/3-SCALE WELDED STEEL FRIGATE MODEL , 1991 .

[12]  Torgeir Moan,et al.  Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition – A case study: Part 1: Nonlinear finite element modelling and ultimate hull girder capacity , 2008 .