Modular steel scaffolds are commonly used as supporting scaffolds in building construction, and traditionally, the load carrying capacities of these scaffolds are obtained from limited full-scale tests with little rational design. Structural failure of these scaffolds occurs from time to time due to inadequate design, poor installation and over-loads on sites. In general, multi-storey modular steel scaffolds are very slender structures which exhibit significant non-linear behaviour. Hence, secondary moments due to both and effects should be properly accounted for in the non-linear analyses. Moreover, while the structural behaviour of these scaffolds is known to be very sensitive to the types and the magnitudes of restraints provided from attached members and supports, yet it is always difficult to quantify these restraints in either test or practical conditions. The problem is further complicated due to the presence of initial geometrical imperfections in the scaffolds, including both member out-of-straightness and storey out-of-plumbness, and hence, initial geometrical imperfections should be carefully incorporated. This paper presents an extensive numerical study on three different approaches in analyzing and designing multi-storey modular steel scaffolds, namely, a) Eigenmode Imperfection Approach, b) Notional Load Approach, and c) Critical Load Approach. It should be noted that the three approaches adopt different ways to allow for the non-linear behaviour of the scaffolds in the presence of initial geometrical imperfections. Moreover, their suitability and accuracy in predicting the structural behaviour of modular steel scaffolds are discussed and compared thoroughly. The study aims to develop a simplified and yet reliable design approach for safe prediction on the load carrying capacities of multi-storey modular steel scaffolds, so that engineers can ensure safe and effective use of these scaffolds in building construction.
[1]
M. H. R. Godley,et al.
Analysis of large proprietary access scaffold structures
,
2001
.
[2]
E Lightfoot,et al.
THE COLLAPSE STRENGTH OF TUBULAR STEEL SCAFFOLD ASSEMBLIES.
,
1977
.
[3]
L. B. Weesner,et al.
Experimental and analytical capacity of frame scaffolding
,
2001
.
[4]
W. F. Chen,et al.
High clearance scaffold systems during construction —I. Structural modelling and modes of failure
,
1996
.
[5]
Bs,et al.
STRUCTURAL BEHAVIOUR OF LOAD BEARING FALSEWORK.
,
1979
.
[6]
Zhi-Hua Zhou,et al.
On the development of a robust element for second-order `non-linear integrated design and analysis (nida)'
,
1998
.
[7]
Jui-Lin Peng,et al.
STRUCTURAL MODELING AND ANALYSIS OF MODULAR FALSEWORK SYSTEMS
,
1997
.
[8]
Manfred A. Hirt,et al.
Probability-based load models of highway traffic
,
1991
.
[9]
How-Ji Chen,et al.
Load-carrying capacities and failure modes of scaffold-shoring systems, Part I: Modeling and experiments
,
2000
.
[10]
Donald W. White,et al.
Notional‐Load Plastic‐Hinge Method for Frame Design
,
1994
.
[11]
W. K. Yu.
An investigation into structural behaviour of modular steel scaffolds
,
2004
.
[12]
D. V. Rosowsky,et al.
Load-carrying capacities and failure modes of scaffold-shoring systems, Part II: An analytical model and its closed-form solution
,
2000
.
[13]
Kwok-Fai Chung,et al.
Structural instability of multi-storey door-type modular steel scaffolds
,
2004
.