Poly(1-vinylimidazole)/Pd-impregnated Nafion for direct methanol fuel cell applications

Abstract Nafion is modified by incorporating poly(1-vinylimidazole)/Pd composites into the ion cluster channels of the membrane. The poly(1-vinylimidazole)/Pd-impregnated (PVI/Pd-impregnated) membranes is characterized by means of X-ray photoelectron spectroscopy (XPS), proton conductivity and methanol permeability measurements and compared with those of the untreated Nafion. The dependence of the membrane proton conductivity and methanol permeability on the poly(1-vinylimidazole) (PVI) and palladium contents in the PVI/Pd-impregnated Nafion is studied. The performance of the cells employing the PVI/Pd-impregnated Nafion is evaluated using a direct methanol fuel cell (DMFC) unit cell. It is found that the best cell performance is obtained when Nafion is impregnated with the PVI/Pd composite solution for 20 h. This result suggests that there exists an optimum content of palladium and PVI in the modified membrane to obtain a high-proton conductivity and low-methanol permeability that result in a high-cell performance.

[1]  V. Tricoli.  Proton and Methanol Transport in Poly(perfluorosulfonate) Membranes Containing Cs + and H + Cations , 1998 .

[2]  Qin Xin,et al.  Pd electroless plated Nafion® membrane for high concentration DMFCs , 2005 .

[3]  Suzana P. Nunes,et al.  Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells , 2002 .

[4]  David A. J. Rand,et al.  Direct methanol–air fuel cells for road transportation , 1999 .

[5]  O. Güven,et al.  Investigation of complex formation between poly(N-vinyl imidazole) and various metal ions using the molar ratio method , 1999 .

[6]  Ji Young Kim,et al.  Surface-modified Nafion membrane by oleylamine-stabilized Pd nanoparticles for DMFC applications , 2007 .

[7]  Shimshon Gottesfeld,et al.  The Water Content Dependence of Electro-Osmotic Drag in Proton-Conducting Polymer Electrolytes , 1995 .

[8]  Ih. Oh,et al.  Modification of polymer electrolyte membranes for DMFCs using Pd films formed by sputtering , 2002 .

[9]  Se Young Oh,et al.  Synthesis and characterization of sulfonated polyimide membranes for direct methanol fuel cell , 2003 .

[10]  S. Woo,et al.  Evaluation of a palladinized Nafion™ for direct methanol fuel cell application , 2004 .

[11]  K. Friedrich,et al.  Transport properties of ionomer composite membranes for direct methanol fuel cells , 2002 .

[12]  H.-G. Haubold,et al.  Nano structure of NAFION: a SAXS study , 2001 .

[13]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[14]  B. Schulte,et al.  Organic/inorganic composite membranes for application in DMFC , 2003 .

[15]  Antonino S. Aricò,et al.  DMFCs: From Fundamental Aspects to Technology Development , 2001 .

[16]  Jang-Woo Lee,et al.  High performance membrane-electrode assembly based on a surface-modified membrane , 2007 .

[17]  T. Zhao,et al.  A palladium-alloy deposited Nafion membrane for direct methanol fuel cells , 2003 .

[18]  Y. Sung,et al.  A Pd-impregnated nanocomposite Nafion membrane for use in high-concentration methanol fuel in DMFC , 2003 .

[19]  M. Kaiser,et al.  Barrier properties of plasma-polymerized thin films , 1999 .

[20]  T. Springer,et al.  A Comparative Study of Water Uptake By and Transport Through Ionomeric Fuel Cell Membranes , 1993 .

[21]  H. Ha,et al.  Preparation and Characterization of Nafion/Poly(1-vinylimidazole) Composite Membrane for Direct Methanol Fuel Cell Application , 2005 .

[22]  Hwayong Kim,et al.  Palladium composite membranes using supercritical CO2 impregnation method for direct methanol fuel cells , 2007 .

[23]  J. Besenhard,et al.  Preparation of Pd-coated polymer electrolyte membranes and their application in direct methanol fuel cells , 2005 .

[24]  Won Choon Choi,et al.  Modification of proton conducting membrane for reducing methanol crossover in a direct-methanol fuel cell , 2001 .

[25]  T. Zhao,et al.  Pd and Pd-Cu Alloy Deposited Nafion Membranes for Reduction of Methanol Crossover in Direct Methanol Fuel Cells , 2005 .

[26]  Christopher K. Dyer.  Fuel cells for portable applications , 2002 .

[27]  D. Peck,et al.  A performance evaluation of direct methanol fuel cell using impregnated tetraethyl-orthosilicate in cross-linked polymer membrane , 2001 .