Experimental Investigation on the Characteristics of Drawn Vacuum Arc in Initial Expanding Stage and in Forced Current-Zero Stage

Experiments on a drawn vacuum arc with forced current zero, which was formed by injection of a countercurrent with a frequency of 1 kHz, were conducted in a detach able vacuum chamber. The prospective peak main current was 3.5 kA. Arc characteristics were investigated with the aid of a high-speed digital camera with an exposure time of 2 μs. In this paper, the influence of axial magnetic field (AMF) distribution and anode material on the evolution of vacuum arc in the initial expanding stage is mainly investigated. Three types of electrodes were used in the experiments. One of them was simple electrodes with butt contact plates, and the other two types were specially designed electrodes generating a conventional bell-shaped AMF profile and a saddle-shaped AMF distribution, respectively. OFHC copper and WCu10 were used as anodes for the electrodes with bell-shaped AMF. The appearance of vacuum arc in the forced current-zero stage is also investigated.

[1]  D. Alferov,et al.  DC vacuum circuit-breaker , 2008, 2008 23rd International Symposium on Discharges and Electrical Insulation in Vacuum.

[2]  D. Shmelev,et al.  Numerical simulation of high-current vacuum arcs with an external axial magnetic field , 2003 .

[3]  P. G. Slade,et al.  Sequential modes of drawn vacuum arcs between butt contacts for currents in the 1 kA to 16 kA range , 1995 .

[4]  S. Yanabu,et al.  Parallel Interruption of Heavy Direct Current by Vacuum Circuit Breakers , 1980, IEEE Transactions on Power Apparatus and Systems.

[5]  P. G. Slade,et al.  Effect of an axial magnetic field upon the development of the vacuum arc between opening electric currents (currents read contacts) , 1993 .

[6]  Zheng Wang,et al.  Axial magnetic field contacts with nonuniform distributed axial magnetic fields , 2003 .

[7]  J. E. Jenkins,et al.  Cathode spot motion in high current vacuum arcs on copper electrodes , 1975 .

[8]  M. B. Schulman,et al.  Effect of an axial magnetic field upon the development of the vacuum arc between opening electric contacts , 1992, Electrical Contacts - 1992 Proceedings of the Thirty-Eighth IEEE Holm Conference on Electrical Contacts.

[9]  K. Yokokura,et al.  The basic investigation of the high-speed VCB and its application for the DC power system , 2008, 2008 23rd International Symposium on Discharges and Electrical Insulation in Vacuum.

[10]  M. B. Schulman,et al.  Transition to the diffuse mode for high-current drawn arcs in vacuum with an axial magnetic field , 2003 .

[11]  R. Stephenson.  A and V , 1962, The British journal of ophthalmology.

[12]  Satoru Yanabu,et al.  Vacuum arc under an axial magnetic field and its interrupting ability , 1979 .

[13]  I. Ohshima,et al.  Physical and theoretical aspects of a new vacuum arc control technology-self arc diffusion by electrode: SADE , 1998 .

[14]  S. Yanabu,et al.  Basic Characteristics of Vacuum Arcs Subjected to a Magnetic Field Parallel to Their Positive Columns , 1983, IEEE Transactions on Plasma Science.

[15]  Shenli Jia,et al.  The Influence of Axial-Magnetic-Field Distribution on the Initial Expansion Process in Triggered Vacuum Arc , 2009, IEEE Transactions on Plasma Science.

[16]  Eiji Kaneko,et al.  Basic investigation of a high-speed vacuum circuit breaker and its vacuum arc characteristics , 2006 .

[17]  S. M. Shkol'nik,et al.  High-current vacuum arc appearance in nonhomogeneous axial magnetic field , 2003 .

[18]  M S Agarwal,et al.  Cathode spot motion in high-current vacuum arcs under self-generated azimuthal and applied axial magnetic fields , 1984 .

[19]  Philip J. Martin,et al.  Handbook of vacuum arc science and technology : fundamentals and applications , 1995 .

[20]  M. B. Schulman,et al.  Evaluation of AC axial magnetic fields needed to prevent anode spots in vacuum arcs between opening contacts , 1993 .

[21]  J. G. Gorman,et al.  The High Current Metal Vapor Arc Column between Separating Electrodes , 1980, IEEE Transactions on Plasma Science.