Upcycling of silicon scrap collected from photovoltaic cell manufacturing process for lithium-ion batteries via transferred arc thermal plasma

[1]  Yi Zhang,et al.  Review of the fabrication and application of porous materials from silicon-rich industrial solid waste , 2022, International Journal of Minerals, Metallurgy and Materials.

[2]  Jong Dae Lee,et al.  Electrochemical performance of graphite/silicon/pitch anode composite prepared by metal etching process , 2022, Korean Journal of Chemical Engineering.

[3]  C. Valderrama,et al.  Anticipatory life cycle analysis framework for sustainable management of end-of-life crystalline silicon photovoltaic panels , 2022, Energy.

[4]  I. Blanco,et al.  An Overview of Thermal Plasma Arc Systems for Treatment of Various Wastes in Recovery of Metals , 2022, Materials.

[5]  Chuanxiang Qin,et al.  Synthesis of free-standing N-doping Si/SiC/C composite nanofiber film as superior lithium-ion batteries anode , 2022, Materials Letters.

[6]  Jong-Hyeok Choi,et al.  Efficient synthesis of high areal capacity Si@graphite@SiC composite anode material via one-step electro-deoxidation , 2021, Journal of Alloys and Compounds.

[7]  C. Mohamad,et al.  A techno-economic analysis of small-scale Trigenerative Compressed Air Energy Storage system , 2021, Energy.

[8]  K. Sohn,et al.  Unified NCNT@rGO bounded porous silicon composite as an anode material for Lithium-ion batteries , 2021, Korean Journal of Chemical Engineering.

[9]  Mohamad K. Khawaja,et al.  Public-private partnership versus extended producer responsibility for end-of-life of photovoltaic modules management policy , 2021, Solar Energy.

[10]  Wenhui Ma,et al.  High-performance Si/nano-Cu/CNTs/C anode derived from photovoltaic silicon waste: A potential photovoltaic-energy storage strategy , 2021 .

[11]  Cheng-Ying Jhan,et al.  Effects of In Situ Graphitic Nanocarbon Coatings on Cycling Performance of Silicon-Flake-Based Anode of Lithium Ion Battery , 2021, Coatings.

[12]  Yasunori Tanaka.  Recent development of new inductively coupled thermal plasmas for materials processing , 2021, Advances in Physics: X.

[13]  M. Ashuri,et al.  Investigation towards scalable processing of silicon/graphite nanocomposite anodes with good cycle stability and specific capacity , 2020 .

[14]  M. Wright,et al.  Techno-economic and greenhouse gas emission analysis of dimethyl ether production via the bi-reforming pathway for transportation fuel , 2020 .

[15]  Kun Zhang,et al.  A highly stable SiOx-based anode enabled by self-assembly with polyelectrolyte , 2020 .

[16]  Jeong-Hwan Oh,et al.  Thermal Plasma Synthesis of Ceramic Nanomaterials , 2020, Applied Science and Convergence Technology.

[17]  John Harrison,et al.  Technical challenges and opportunities in realising a circular economy for waste photovoltaic modules , 2020, Renewable and Sustainable Energy Reviews.

[18]  M. Yasuura,et al.  Waveguide-mode Sensor Chip with Si/SiO2/SiOx Structure , 2020, Sensors and Materials.

[19]  U. Hansen,et al.  The dark side of the sun: solar e-waste and environmental upgrading in the off-grid solar PV value chain , 2020, Industry and Innovation.

[20]  P. Xing,et al.  Recycling silicon from silicon cutting waste by Al–Si alloying , 2020 .

[21]  Chao Wang,et al.  Sandwich-like silicon/Ti3C2Tx MXene composite by electrostatic self-assembly for high performance lithium ion battery , 2020 .

[22]  P. Ocłoń,et al.  Thermal and economic analysis of preinsulated and twin-pipe heat network operation , 2020 .

[23]  Kamaruzzaman Sopian,et al.  An overview of solar photovoltaic panels’ end-of-life material recycling , 2020 .

[24]  Yi Tan,et al.  Remanufacturing of silicon powder waste cut by a diamond-wire saw through high temperature non-transfer arc assisted vacuum smelting. , 2019, Journal of hazardous materials.

[25]  X. Hou,et al.  A novel two-stage synthesis for 3C–SiC nanowires by carbothermic reduction and their photoluminescence properties , 2019, Journal of Materials Science.

[26]  M. Zeleňáková,et al.  An Analysis of the Effectiveness of Two Rainwater Harvesting Systems Located in Central Eastern Europe , 2019, Water.

[27]  Zhan Lin,et al.  Aligning academia and industry for unified battery performance metrics , 2018, Nature Communications.

[28]  D. Deng,et al.  Recycling of silicon powder waste cut by a diamond-wire saw through laser-assisted vacuum smelting , 2018, Journal of Cleaner Production.

[29]  Xianglong Li,et al.  Dimensionally Designed Carbon–Silicon Hybrids for Lithium Storage , 2018, Advanced Functional Materials.

[30]  Qiaobao Zhang,et al.  Controlling Surface Oxides in Si/C Nanocomposite Anodes for High‐Performance Li‐Ion Batteries , 2018, Advanced Energy Materials.

[31]  Xiangjie Gong,et al.  Plasma methods for metals recovery from metal-containing waste. , 2018, Waste management.

[32]  S. Thomas,et al.  Clean enhancing elimination of boron from silicon kerf using Na2O-SiO2 slag treatment , 2018, Journal of Cleaner Production.

[33]  W. Feng,et al.  The influence of different Si : C ratios on the electrochemical performance of silicon/carbon layered film anodes for lithium-ion batteries , 2018, RSC advances.

[34]  G. Heath,et al.  End-of-Life Management of Photovoltaic Panels: Trends in PV Module Recycling Technologies , 2018 .

[35]  Yurong Ren,et al.  Embedded Si/Graphene Composite Fabricated by Magnesium-Thermal Reduction as Anode Material for Lithium-Ion Batteries , 2017, Nanoscale Research Letters.

[36]  Marco Gambini,et al.  Environmental impacts of PV technology throughout the life cycle: Importance of the end-of-life management for Si-panels and CdTe-panels , 2017 .

[37]  Oluwadamilola O. Taiwo,et al.  Investigation of cycling-induced microstructural degradation in silicon-based electrodes in lithium-ion batteries using X-ray nanotomography , 2017 .

[38]  F. Nanni,et al.  A new green methodology for surface modification of diatomite filler in elastomers , 2017 .

[39]  Suning Liu,et al.  Removal of Fe, B and P impurities by enhanced separation technique from silicon-rich powder of the multi-wire sawing slurry , 2016 .

[40]  Xinhai Li,et al.  Improved compatibility of graphite anode for lithium ion battery using sulfuric esters , 2016 .

[41]  P. Chahal,et al.  Selective Fabrication of SiC/Si Diodes by Excimer Laser Under Ambient Conditions , 2016, IEEE Electron Device Letters.

[42]  Xiaodong Su,et al.  Next-generation multi-crystalline silicon solar cells: Diamond-wire sawing, nano-texture and high efficiency , 2015 .

[43]  Zhiwei Zhang,et al.  Mesoporous silicon/carbon hybrids with ordered pore channel retention and tunable carbon incorporated content as high performance anode materials for lithium-ion batteries , 2015 .

[44]  D. T. Pham,et al.  Hollow carbon nanospheres/silicon/alumina core-shell film as an anode for lithium-ion batteries , 2015, Scientific Reports.

[45]  Jui-Yuan Lee,et al.  CO2 Allocation for Scheduling Enhanced Oil Recovery (EOR) Operations with Geological Sequestration Using Discrete-time Optimization , 2014 .

[46]  P. Shearing,et al.  Particle Size Polydispersity in Li-Ion Batteries , 2014 .

[47]  B. Hwang,et al.  A stable silicon/graphene composite using solvent exchange method as anode material for lithium ion batteries , 2013 .

[48]  Jian Yu Huang,et al.  Size-dependent fracture of silicon nanoparticles during lithiation. , 2011, ACS nano.

[49]  Xiqian Yu,et al.  Alumina‐Coated Patterned Amorphous Silicon as the Anode for a Lithium‐Ion Battery with High Coulombic Efficiency , 2011, Advanced materials.

[50]  Masaya Shigeta,et al.  Numerical Analysis for Preparation of Silicon-Based Intermetallic Nano-Particles in Induction Thermal Plasma Flow Systems( Advanced Fusion of Functional Fluids Engineering) , 2005 .

[51]  L. Ley,et al.  Electronic structure of hydrogenated and unhydrogenated amorphous Si N x ( 0 ≤ x ≤ 1 . 6 ) : A photoemission study , 1984 .