Customizing insulation material properties for building retrofitting: From infrared thermography to additive manufacturing

The European Commission proposed a recast to the Energy Efficiency Directive with a target of 30% energy efficiency for 2030. Buildings are the largest energy consumers sector in EU. To reduce the energy consumption of existing buildings and promote energy efficiency retrofit, it is important to improve the thermal performance of the building envelope, acting on thermal bridges to enhance the optimal thermal comfort for building occupants. In this work, a customized solution is proposed combining IR thermography and a generative computer tool to design a functionally graded insulation layer tailored to specific conditions, resulting in a material efficient design reducing weight and material usage. AM technologies were then used to produce a scaled prototype.

[1]  Giorgio Baldinelli,et al.  A model for the improvement of thermal bridges quantitative assessment by infrared thermography , 2018 .

[2]  Elena Lucchi,et al.  Applications of the infrared thermography in the energy audit of buildings: A review , 2018 .

[3]  Paulo Jorge Da Silva bartolo,et al.  Topology and material optimization of architectural components , 2017 .

[4]  Simon Ford,et al.  Additive manufacturing and sustainability: an exploratory study of the advantages and challenges , 2016 .

[5]  David W. Rosen,et al.  A review of synthesis methods for additive manufacturing , 2016 .

[6]  Neri Oxman,et al.  Water-Based Robotic Fabrication: Large-Scale Additive Manufacturing of Functionally Graded Hydrogel Composites via Multichamber Extrusion , 2014 .

[7]  F. Gugliermetti,et al.  A qualitative method for combining thermal imprints to emerging weak points of ancient wall structures by passive infrared thermography – A case study , 2014 .

[8]  Neri Oxman,et al.  Compound fabrication: A multi-functional robotic platform for digital design and fabrication , 2013 .

[9]  J. O. Lewis,et al.  Cities of Tomorrow – Action Today. URBACT II Capitalisation. Building energy efficiency in European cities , 2013 .

[10]  Paulo Jorge Da Silva bartolo,et al.  Functionally Graded Structures through Building Manufacturing , 2013 .

[11]  Christopher Gorse,et al.  A Dictionary of Construction, Surveying and Civil Engineering , 2012 .

[12]  Neri Oxman,et al.  Variable property rapid prototyping , 2011 .

[13]  Behrokh Khoshnevis,et al.  Mega-scale fabrication by Contour Crafting , 2006 .

[14]  Sunpreet Singh,et al.  Material issues in additive manufacturing: A review , 2017 .

[15]  H. M. Bartoloa,et al.  A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing , 2017 .

[16]  Corky Binggeli,et al.  Building Systems for Interior Designers, 3rd Ed , 2016 .

[17]  Simon A. Austin,et al.  Fabricating construction components using layer manufacturing technology , 2009 .