Static damage identification in beams by minimum constitutive relation error

ABSTRACT A novel static identification approach to beam damage is presented. It is based on the minimum constitutive relation error (CRE) principle where the exact stiffness, the exact displacement and the exact bending moment are shown to make the CRE functional minimal. For practical implementation, two cases regarding full-field displacement measurements and finite-point displacement data, respectively, are considered. For full-field displacement measurements, the CRE functional is directly treated as the objective functional while in case of finite-point measurement data, the CRE functional along with additional penalty terms for treatment of the finite-point displacement measurements is defined as the objective functional. Multiple loads and associated sets of measurements are also considered to improve the identifiability and robustness of the procedure. Convergence is finally verified through numerical examples.

[1]  E. A. W. Maunder,et al.  A GENERAL FORMULATION OF EQUILIBRIUM MACRO-ELEMENTS WITH CONTROL OF SPURIOUS KINEMATIC MODES : THE EXORCISM OF AN OLD CURSE , 1996 .

[2]  S. Caddemi,et al.  The influence of instrumental errors on the static identification of damage parameters for elastic beams , 2006 .

[3]  Afzal Suleman,et al.  Force method revisited , 2003 .

[4]  Mohamed Abdel-Basset Abdo,et al.  Parametric study of using only static response in structural damage detection , 2012 .

[5]  G. Richter.  An Inverse Problem for the Steady State Diffusion Equation , 1981 .

[6]  Ian Knowles,et al.  Uniqueness for an Elliptic Inverse Problem , 1999, SIAM J. Appl. Math..

[7]  H. M. Lee,et al.  Gage‐Free Stress Estimation of a Beam‐like Structure Based on Terrestrial Laser Scanning , 2011, Comput. Aided Civ. Infrastructure Eng..

[8]  Sami F. Masri,et al.  A vision-based approach for the direct measurement of displacements in vibrating systems , 2003 .

[9]  I. Knowles.  Parameter identification for elliptic problems , 2001 .

[10]  Mumin Song,et al.  Overview of three-dimensional shape measurement using optical methods , 2000 .

[11]  Stéphane Pagano,et al.  Identification of Mechanical Properties by Displacement Field Measurement: A Variational Approach , 2003 .

[12]  David Moens,et al.  Identification of design parameter variability of honeycomb sandwich beams from a study of limited available experimental dynamic structural response data , 2015 .

[13]  S. Patsias,et al.  Damage Detection Using Optical Measurements and Wavelets , 2002 .

[14]  Michael P. Ekstrom,et al.  Digital Image Processing Techniques , 1984 .

[15]  Benoît Blaysat,et al.  The constitutive compatibility method for identification of material parameters based on full-field measurements , 2013 .

[16]  Joseph Morlier,et al.  Virtual Vibration Measurement Using KLT Motion Tracking Algorithm , 2010 .

[17]  Eric Florentin,et al.  Using constitutive equation gap method for identification of elastic material parameters: technical insights and illustrations , 2011 .

[18]  Kenneth R. White,et al.  Close-range photogrammetry applications in bridge measurement: Literature review , 2008 .

[19]  Faouzi Ghrib,et al.  Damage Identification of Euler–Bernoulli Beams Using Static Responses , 2012 .

[20]  Annamaria Pau,et al.  Damage identification in Euler frames , 2012 .

[21]  Arun Kumar Pandey,et al.  Damage detection from changes in curvature mode shapes , 1991 .

[22]  Jong-Jae Lee,et al.  A vision-based system for remote sensing of bridge displacement , 2006 .

[23]  A. K. Pandey,et al.  Damage Detection in Structures Using Changes in Flexibility , 1994 .

[24]  Muneo Hori,et al.  A NUMERICAL STUDY OF STRUCTURAL DAMAGE DETECTION USING CHANGES IN THE ROTATION OF MODE SHAPES , 2002 .

[25]  Franccois Hild,et al.  Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties – a Review , 2006 .

[26]  Wei Fan,et al.  Vibration-based Damage Identification Methods: A Review and Comparative Study , 2011 .

[27]  Jung-Hoon Kim,et al.  3D displacement measurement model for health monitoring of structures using a motion capture system , 2015 .

[28]  Qw Yang,et al.  Structural damage localization and quantification using static test data , 2011 .

[29]  M. D. Paola,et al.  An Integral Equation for Damage Identification of Euler-Bernoulli Beams under Static Loads , 2004 .

[30]  Gongkang Fu,et al.  AN OPTICAL APPROACH TO STRUCTURAL DISPLACEMENT MEASUREMENT AND ITS APPLICATION , 2002 .

[31]  Stéphane Avril,et al.  General framework for the identification of constitutive parameters from full-field measurements in linear elasticity , 2007 .

[32]  Nam-Sik Kim,et al.  Multi-point Displacement Response Measurement of Civil Infrastructures Using Digital Image Processing , 2011 .

[33]  Pierre Ladevèze,et al.  A robust CRE-based approach for model updating using in situ measurements , 2013 .

[34]  Chih-Chen Chang,et al.  Nontarget Image-Based Technique for Small Cable Vibration Measurement , 2008 .

[35]  O. S. Salawu.  Detection of structural damage through changes in frequency: a review , 1997 .

[36]  Hyun Myung,et al.  Vision-based displacement measurement method for high-rise building structures using partitioning approach , 2010 .

[37]  Hongzhi Zhong,et al.  A traction‐based equilibrium finite element free from spurious kinematic modes for linear elasticity problems , 2014 .

[38]  Mehmet Çelebi,et al.  GPS in Dynamic Monitoring of Long-Period Structures , 2000 .

[39]  Robert V. Kohn,et al.  A variational method for parameter identification , 1988 .

[40]  Hojjat Adeli,et al.  A New Approach for Health Monitoring of Structures: Terrestrial Laser Scanning , 2007, Comput. Aided Civ. Infrastructure Eng..

[41]  Jin-Hee Ahn,et al.  Structural dynamic displacement vision system using digital image processing , 2011 .

[42]  Shun-ichi Nakamura,et al.  GPS MEASUREMENT OF WIND-INDUCED SUSPENSION BRIDGE GIRDER DISPLACEMENTS , 2000 .

[43]  Ho-Yeon Jung,et al.  Damage detection for beam-like structures using the normalized curvature of a uniform load surface , 2013 .

[44]  Hani Nassif,et al.  Comparison of laser Doppler vibrometer with contact sensors for monitoring bridge deflection and vibration , 2005 .

[45]  Gilles Lubineau,et al.  A goal-oriented field measurement filtering technique for the identification of material model parameters , 2009 .

[46]  K. Hjelmstad,et al.  Parameter Estimation of Structures from Static Response. II: Numerical Simulation Studies , 1994 .

[47]  F. Bakhtiari-Nejad,et al.  A structural damage detection method using static noisy data , 2005 .

[48]  Marc Bonnet,et al.  Inverse problems in elasticity , 2005 .

[49]  Tamara G. Kolda,et al.  Optimization by Direct Search: New Perspectives on Some Classical and Modern Methods , 2003, SIAM Rev..

[50]  Charles R. Farrar,et al.  Application of the strain energy damage detection method to plate-like structures , 1999 .

[51]  D. Tran,et al.  Damage location vector: A non-destructive structural damage detection technique , 2005 .

[52]  K. Hjelmstad,et al.  Parameter Estimation of Structures from Static Response. I. Computational Aspects , 1994 .

[53]  Otmar Scherzer,et al.  Stability in the linearized problem of quantitative elastography , 2014, 1406.0291.

[54]  Piotr Olaszek,et al.  Investigation of the dynamic characteristic of bridge structures using a computer vision method , 1999 .

[55]  Paolo Bocchini,et al.  Non-destructive parametric system identification and damage detection in truss structures by static tests , 2013 .

[56]  Stathis C. Stiros,et al.  Monitoring dynamic and quasi-static deformations of large flexible engineering structures with GPS: Accuracy, limitations and promises , 2006 .

[57]  Pierre Ladevèze,et al.  Application of a posteriori error estimation for structural model updating , 1999 .

[58]  Pizhong Qiao,et al.  Vibration-based Damage Identification Methods: A Review and Comparative Study , 2011 .

[59]  Daniel Leonardo B.R. Jurjo,et al.  Experimental methodology for the dynamic analysis of slender structures based on digital image processing techniques , 2010 .

[60]  Eric Florentin,et al.  Identification of the parameters of an elastic material model using the constitutive equation gap method , 2010 .

[61]  Pierre Ladevèze,et al.  Error Estimate Procedure in the Finite Element Method and Applications , 1983 .

[62]  Ning Hu,et al.  Structural damage identification using static test data and changes in frequencies , 2000 .

[63]  M. Rezaiee-Pajand,et al.  Static Damage Identification of 3D and 2D Frames , 2014 .

[64]  Hyo Seon Park,et al.  A Deformed Shape Monitoring Model for Building Structures Based on a 2D Laser Scanner , 2013, Sensors.