Magnetically aligned nanodomains: application in high-performance ion conductive membranes.

Polyelectrolyte-coated magnetic nanoparticles were prepared by decorating the surface of superparamagnetic iron oxide nanoparticles (SPIONs) with crosslinked chitosan oligopolysaccharide (CS). These positively charged particles (CS-SPIONs) were then added to a negatively charged polymer (Nafion), and cast into membranes under an applied magnetic field. TEM and SAXS measurements confirmed this process created aligned, cylindrical nanodomains in the membranes. This was also indirectly confirmed by proton conductivity values. The strong electrostatic interaction between chitosan and Nafion prevented oxygen permeability and water evaporation at elevated temperatures through the proton conductive channels. The resultant proton exchange membranes showed lower conduction dependency to relative humidity, which is highly desirable for hydrogen fuel cells. The fuel cell performance tests were performed on the designed polyelectrolyte membrane by hydrogen-oxygen single cells at elevated temperature (120 °C) and low relative humidity.

[1]  S. Nakazawa,et al.  An Extremely Low Methanol Crossover and Highly Durable Aromatic Pore‐Filling Electrolyte Membrane for Direct Methanol Fuel Cells , 2007 .

[2]  D. Jung,et al.  Innovative polymer nanocomposite electrolytes: nanoscale manipulation of ion channels by functionalized graphenes. , 2011, ACS nano.

[3]  L. K. Vinh,et al.  Preparation and characterization of magnetic nanoparticles with chitosan coating , 2009 .

[4]  Mohammad Mahdi Hasani-Sadrabadi,et al.  Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications. , 2012, Chemical communications.

[5]  M. Z. Yates,et al.  Tailoring the structure of S-PEEK/PDMS proton conductive membranes through applied electric fields , 2008 .

[6]  Jing Li,et al.  Linear coupling of alignment with transport in a polymer electrolyte membrane. , 2011, Nature materials.

[7]  Tao Zhang,et al.  Function and Characterization of Metal Oxide−Nafion Composite Membranes for Elevated-Temperature H2/O2 PEM Fuel Cells , 2006 .

[8]  H. Kawakami,et al.  Aligned electrospun nanofiber composite membranes for fuel cell electrolytes. , 2010, Nano letters.

[9]  G. Palmese,et al.  Membranes with Oriented Polyelectrolyte Nanodomains , 2006 .

[10]  M. M. Hasani-Sadrabadi,et al.  Electrochemical investigation of sulfonated poly(ether ether ketone)/clay nanocomposite membranes for moderate temperature fuel cell applications , 2010 .

[11]  K. Jacob,et al.  Cellulose nanowhiskers to regulate the microstructure of perfluorosulfonate ionomers for high-performance fuel cells , 2014 .

[12]  Hongwei Zhang,et al.  Advances in the high performance polymer electrolyte membranes for fuel cells. , 2012, Chemical Society reviews.

[13]  L. Juillerat-Jeanneret,et al.  Development of functionalized superparamagnetic iron oxide nanoparticles for interaction with human cancer cells. , 2005, Biomaterials.

[14]  Xuemin Yan,et al.  Proton exchange membrane with hydrophilic capillaries for elevated temperature PEM fuel cells , 2009 .

[15]  Bin Dong,et al.  Super proton conductive high-purity nafion nanofibers. , 2010, Nano letters.

[16]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[17]  M. Shaw,et al.  Magnetic ion-exchange nanoparticles and their application in proton exchange membranes , 2007 .

[18]  K. Jacob,et al.  Preparation and characterization of nanocomposite polyelectrolyte membranes based on Nafion® ionomer and nanocrystalline hydroxyapatite , 2011 .

[19]  Mohammad Mahdi Hasani-Sadrabadi,et al.  Nafion ® /bio-functionalized montmorillonite nanohybrids as novel polyelectrolyte membranes for direct methanol fuel cells , 2009 .

[20]  R. Hayward,et al.  Enhancement of anhydrous proton transport by supramolecular nanochannels in comb polymers. , 2010, Nature chemistry.

[21]  M. Shaw,et al.  Proton-exchange membranes composed of slightly sulfonated poly(ether ketone ketone) and highly sulfonated crosslinked polystyrene particles , 2006 .

[22]  Nam Hoon Kim,et al.  Polymer membranes for high temperature proton exchange membrane fuel cell : recent advances and challenges , 2011 .

[23]  V. Freger,et al.  Highly conductive ordered heterogeneous ion-exchange membranes , 2004 .

[24]  M. Soleimani,et al.  Novel nanofiber-based triple-layer proton exchange membranes for fuel cell applications , 2011 .

[25]  M. M. Hasani-Sadrabadi,et al.  Magnetic field aligned nanocomposite proton exchange membranes based on sulfonated poly (ether sulfo , 2011 .

[26]  K. Jacob,et al.  Triple-layer proton exchange membranes based on chitosan biopolymer with reduced methanol crossover for high-performance direct methanol fuel cells application , 2012 .

[27]  M. M. Hasani-Sadrabadi,et al.  Novel high-performance nanohybrid polyelectrolyte membranes based on bio-functionalized montmorillonite for fuel cell applications. , 2010, Chemical communications.

[28]  Chinedum O. Osuji,et al.  Magnetic field alignment of block copolymers and polymer nanocomposites: Scalable microstructure control in functional soft materials , 2012 .

[29]  M. Torkkeli,et al.  Structural Hierarchy in Flow-Aligned Hexagonally Self-Organized Microphases with Parallel Polyelectrolytic Structures , 2003 .

[30]  Carlos Rinaldi,et al.  Water dispersible iron oxide nanoparticles coated with covalently linked chitosan , 2009 .

[31]  M. M. Hasani-Sadrabadi,et al.  Characterization of nanohybrid membranes for direct methanol fuel cell applications , 2009 .

[32]  R. Hayward,et al.  Fabrication of co-continuous nanostructured and porous polymer membranes: spinodal decomposition of homopolymer and random copolymer blends. , 2012, Angewandte Chemie.

[33]  S. Kitagawa,et al.  One-dimensional imidazole aggregate in aluminium porous coordination polymers with high proton conductivity. , 2009, Nature materials.

[34]  P. Renaud,et al.  Polybenzimidazole‐decorated carbon nanotube: A high‐performance proton conductor , 2012 .

[35]  Pawel W. Majewski,et al.  Large area vertical alignment of ZnO nanowires in semiconducting polymer thin films directed by magnetic fields. , 2013, Nanoscale.

[36]  M. Z. Yates,et al.  Electric field processing to control the structure of poly(vinylidene fluoride) composite proton conducting membranes , 2009 .

[37]  Qiang Chen,et al.  Parallel cylindrical water nanochannels in Nafion fuel-cell membranes. , 2008, Nature materials.

[38]  O. Diat,et al.  Proton channels. , 2008, Nature materials.

[39]  P. Renaud,et al.  Morphological tuning of polymeric nanoparticles via microfluidic platform for fuel cell applications. , 2012, Journal of the American Chemical Society.

[40]  U. Jeng,et al.  Morphology and properties of Nafion membranes prepared by solution casting , 2009 .