Synthesis of PR-/RP-chain-based compliant mechanisms – design of applications exploiting fibre reinforced material characteristics

Abstract. Compliant mechanisms have several advantages, especially their smaller number of elements and therefore less movable joints. The flexural members furthermore allow an integration of special functions like balancing or locking. Synthesis methods based on the rigid body model (Howell, 2001; Sonmezv, 2008) or topology optimisation (Zhou and Mandala, 2012) provide practical applications from the advantages of compliant elements. Beside these methods, a much simpler approach is the geometric-based synthesis (Ehlig et al., 2013) which is focused on solving guidance tasks by using RR-chain1-based compliant linkages. More compact compliant linkages can be build up by using only PR2 or RP3 chains. Therefore a tool is needed to extend the RR-chain-based approach. The necessary analysis of the compliant beam element can be done by numerical analysis and through experiments. Due to the validity of the Bernoulli beam model the elastic similitude can be specialised and a more general synthesis of compliant beam elements can be created. Altogether a generalised synthesis method can be created for handling different linkage structures as well integrating beam elements derived numerically or by measurement. The advances in this method are applied in the synthesis for a cupholder mechanism made of fiber reinforced material. 1 one link with two rotational joints (R) 2 one link with one frame fixed prismatic joint (P) and one moving rotational joint (R) 3 one link with one frame fixed rotational joint (R) and one moving prismatic joint (P)

[1]  F. De Bona,et al.  A generalized elastica-type approach to the analysis of large displacements of spring-strips , 1997 .

[2]  Vincenzo Parenti-Castelli,et al.  A novel technique for position analysis of planar compliant mechanisms , 2005 .

[3]  K. E. Bisshopp,et al.  Large deflection of cantilever beams , 1945 .

[4]  Moritz Weber.  Das Allgemeine Ähnlichkeitsprinzip der Physik und sein Zusammenhang mit der Dimensionslehre und der Modellwissenschaft , 1930 .

[5]  L. Tsai,et al.  Modeling of Flexural Beams Subjected to Arbitrary End Loads , 2002 .

[6]  Hong Zhou,et al.  Topology Optimization of Compliant Mechanisms Using the Improved Quadrilateral Discretization Model , 2012 .

[7]  L. F. Campanile,et al.  A simple and effective solution of the elastica problem , 2008 .

[8]  Burkhard Corves,et al.  Teaching in Mechanism Theory – From Hands-on Analysis to Virtual Modeling , 2013 .

[9]  McCarthy,et al.  Geometric Design of Linkages , 2000 .

[10]  K.-H. Modler,et al.  Optimization of a Test Bench for Testing Compliant Elements Under Shear-Force-Free Bending Load , 2013 .

[11]  B. Jensen,et al.  Modeling and Experiments of Buckling Modes and Deflection of Fixed-Guided Beams in Compliant Mechanisms , 2011 .

[12]  K.-H. Modler,et al.  Geometrical Synthesis Approach for Compliant Mechanisms – Design of Applications Exploiting Fibre Reinforced Material Characteristics , 2014 .

[13]  G. K. Ananthasuresh,et al.  A compliant mechanism kit with flexible beams and connectors along with analysis and optimal synthesis procedures , 2009 .

[14]  C. Tutum,et al.  A Compliant Bistable Mechanism Design Incorporating Elastica Buckling Beam Theory and Pseudo-Rigid-Body Model , 2008 .

[15]  Aimei Zhang,et al.  A Comprehensive Elliptic Integral Solution to the Large Deflection Problems of Thin Beams in Compliant Mechanisms , 2012 .