Adaptability research on phase change materials based technologies in China
暂无分享,去创建一个
Ashish Shukla | Shuli Liu | Cheng Zeng | Shuli Liu | A. Shukla | Cheng Zeng
[1] Zhang Lin,et al. Performance investigation of a novel frost-free air-source heat pump water heater combined with energy storage and dehumidification , 2015 .
[2] Andreas K. Athienitis,et al. Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .
[3] Luisa F. Cabeza,et al. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .
[4] Chris Bales,et al. Combining thermal energy storage with buildings – a review , 2015 .
[5] Kamal Abdel Radi Ismail,et al. PCM THERMAL INSULATION IN BUILDINGS , 1997 .
[6] L. Cabeza,et al. Review of the T-history method to determine thermophysical properties of phase change materials (PCM) , 2013 .
[7] F. Bruno,et al. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems , 2012 .
[8] A. Bejan,et al. Thermal Energy Storage: Systems and Applications , 2002 .
[9] R. Velraj,et al. Review on free cooling of buildings using phase change materials , 2010 .
[10] Dong Li,et al. Numerical analysis on thermal performance of roof contained PCM of a single residential building , 2015 .
[11] Yi Jiang,et al. Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .
[12] Xin Wang,et al. An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating , 2007 .
[13] J. Fricke,et al. PCM-facade-panel for daylighting and room heating , 2005 .
[14] Ren Jun. Experimental research on PCM roof brick , 2011 .
[15] Baizhan Li,et al. An introduction to the Chinese Evaluation Standard for the indoor thermal environment , 2014 .
[16] Meredydd Evans,et al. Scenarios of building energy demand for China with a detailed regional representation , 2014 .
[17] Xu Xu,et al. Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates , 2004 .
[18] Lv Shilei,et al. Impact of phase change wall room on indoor thermal environment in winter , 2006 .
[19] H. Inaba,et al. Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .
[20] V. V. Tyagi,et al. PCM thermal storage in buildings: A state of art , 2007 .
[21] Derek J. Croome,et al. Air-conditioning in China , 1995 .
[22] Nasrudin Abd Rahim,et al. Review of PCM based cooling technologies for buildings , 2012 .
[23] Parfait Tatsidjodoung,et al. A review of potential materials for thermal energy storage in building applications , 2013 .
[24] Paul Cooper,et al. Development and evaluation of a ceiling ventilation system enhanced by solar photovoltaic thermal collectors and phase change materials , 2014 .
[25] M. Kenisarin. Thermophysical properties of some organic phase change materials for latent heat storage. A review , 2014 .
[26] Zhang Qun. SIMULATION ON THE THERMAL PERFORMANCE OF HYDRAULIC FLOOR HEATING MODULAR WITH SHAPE-STABILIZED PHASE CHANGE MATERIALS FOR THERMAL ENERGY STORAGE , 2006 .
[27] Amar M. Khudhair,et al. A review on phase change energy storage: materials and applications , 2004 .
[28] Ye Hong,et al. Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material , 2000 .
[29] Joseph Virgone,et al. Optimization of a Phase Change Material Wallboard for Building Use , 2008 .
[30] Shazim Ali Memon,et al. Phase change materials integrated in building walls: A state of the art review , 2014 .
[31] Zhou Xiu-jie. Characteristics of Secular Change and Base State of Temperature in Harbin , 2012 .
[32] Frédéric Kuznik,et al. A review on phase change materials integrated in building walls , 2011 .
[33] Dan Zhou,et al. Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .
[34] Zhengguo Zhang,et al. A novel montmorillonite-based composite phase change material and its applications in thermal storage building materials , 2006 .
[35] Murat Kenisarin,et al. Form-stable phase change materials for thermal energy storage , 2012 .
[36] Philip C. Eames,et al. The application of a validated numerical model to predict the energy conservation potential of using phase change materials in the fabric of a building , 2006 .
[37] A. D. Solomon,et al. Melt time and heat flux for a simple PCM body , 1979 .
[38] Piljae Im,et al. Comparison of building energy use data between the United States and China , 2014, Energy and Buildings.
[39] Chen Shi-ling. Experimental Analysis of Solar Energy Combined with Phase-change Energy Storage Ventilation System , 2011 .
[40] Yi Jiang,et al. Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard , 2008 .
[41] Haifeng Guo,et al. A new kind of phase change material (PCM) for energy-storing wallboard , 2008 .
[42] Khamid Mahkamov,et al. Solar energy storage using phase change materials , 2007 .
[43] Noel León,et al. High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques , 2013 .
[44] Dorel Feldman,et al. Latent heat storage in building materials , 1993 .
[45] D. Feldman,et al. Development and application of organic phase change mixtures in thermal storage gypsum wallboard , 1995 .
[46] G. C. Bakos. Energy management method for auxiliary energy saving in a passive-solar-heated residence using low-cost off-peak electricity , 2000 .
[47] Son H. Kim,et al. China's building energy demand: Long-term implications from a detailed assessment , 2012 .
[48] José Luis Valverde,et al. Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio , 2010 .
[49] Luis Pérez-Lombard,et al. A review on buildings energy consumption information , 2008 .
[50] Xu Xu,et al. Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .
[51] Sheikh Ahmad Zaki,et al. A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .
[52] Beat Lehmann,et al. Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings , 2004 .
[53] Wei Xiao,et al. Analytical optimization of interior PCM for energy storage in a lightweight passive solar room , 2009 .
[54] Halime Paksoy,et al. Phase Change Material Sandwich Panels for Managing Solar Gain in Buildings , 2009 .
[55] Jiang Yi,et al. Modeling and experimental study on an innovative passive cooling system—NVP system , 2003 .
[56] Luisa F. Cabeza,et al. Experimental Study of PCM Inclusion in Different Building Envelopes , 2009 .
[57] Xu Xu,et al. Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .
[58] Ruzhu Wang,et al. Building integrated energy storage opportunities in China , 2012 .
[59] Alfonso Capozzoli,et al. Hybrid HVAC systems with chemical dehumidification for supermarket applications , 2006 .
[60] Kamil Kaygusuz,et al. Capric acid and stearic acid mixture impregnated with gypsum wallboard for low‐temperature latent heat thermal energy storage , 2008 .
[61] Daisuke Sumiyoshi,et al. Optimization of passive design measures for residential buildings in different Chinese areas , 2012 .
[62] W. Bordass,et al. Energy performance of occupied non-domestic buildings: Assessment by analysing end-use energy consumptions , 1997 .
[63] D. Feldman,et al. Evaluation of thermal storage as latent heat in phase change material wallboard by differential scanning calorimetry and large scale thermal testing , 1998 .
[64] Rui Yang,et al. Study of an electrical heating system with ductless air supply and shape-stabilized PCM for thermal storage , 2007 .
[65] Luisa F. Cabeza,et al. Materials used as PCM in thermal energy storage in buildings: A review , 2011 .
[66] W. Tao,et al. Fatty acids as phase change materials: A review , 2014 .
[67] Jian Liu,et al. Path towards achieving of China's 2020 carbon emission reduction target—A discussion of low-carbon energy policies at province level , 2011 .
[68] Liu Yang,et al. An analysis of the bioclimates in different climates and implications for the built environment in China , 2010 .
[69] Feng Xing,et al. Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels , 2014 .
[70] Zia Ud Din,et al. Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .
[71] A. Sharma,et al. Review on thermal energy storage with phase change materials and applications , 2009 .
[72] Jianlei Niu,et al. Performance of cooled-ceiling operating with MPCM slurry , 2009 .
[73] Wen-Long Cheng,et al. Effect of thermal conductivities of shape stabilized PCM on under-floor heating system , 2015 .
[74] Yu Tian,et al. Defrosting performances of a multi-split air source heat pump with phase change thermal storage , 2015 .
[75] M. K. Rathod,et al. Thermal stability of phase change materials used in latent heat energy storage systems: A review , 2013 .