Cerámica y Vidrio Prospective use of the 3D printing technology for the microstructural engineering of Solid Oxide Fuel Cell components

Departamento de Química, Universidad de La Laguna, 38200-Tenerife, Spain. Departamento de Física, Universidad de La Laguna, 38206-Tenerife, Spain. Departamento de Ingeniería Química, Universidad de La Laguna, 38200-Tenerife, Spain. Instituto de Investigación en Energías Renovables, Universidad de Castilla-La Mancha, 02071-Albacete, Spain *Corresponding author. E-mail address: jcruiz@ull.es (Juan Carlos Ruiz-Morales). Tel: +34 922318974, Fax: +34 922318461

[1]  Jia-Chang Wang,et al.  A novel fabrication method of high strength alumina ceramic parts based on solvent-based slurry stereolithography and sintering , 2013 .

[2]  Howon Lee,et al.  Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics , 2012, Journal of visualized experiments : JoVE.

[3]  Juan Carlos Ruiz-Morales,et al.  Engineering of materials for solid oxide fuel cells and other energy and environmental applications , 2010 .

[4]  In-Baek Park,et al.  Three-dimensional microstructure using partitioned cross-sections in projection microstereolithography , 2010 .

[5]  Joseph Muskin,et al.  Three-Dimensional Printing Using a Photoinitiated Polymer , 2010 .

[6]  J. Bassat,et al.  Electrochemical characterization of YSZ thick films deposited by dip-coating process , 2007 .

[7]  Wuzong Zhou,et al.  Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation , 2006, Nature.

[8]  John W. Halloran,et al.  Freeform Fabrication of Ceramics via Stereolithography , 2005 .

[9]  Nicholas X. Fang,et al.  Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[10]  Thierry Chartier,et al.  Stereolithography of structural complex ceramic parts , 2002 .

[11]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.

[12]  Cheng Sun,et al.  Micro-stereolithography of polymeric and ceramic microstructures , 1999 .

[13]  B. Steele.  Ceramic ion conducting membranes and their technological applications , 1998 .

[14]  Chunguang Xia.  Three-dimensional polymeric capillary network: Fabrication and applications , 2009 .

[15]  Thierry Chartier,et al.  Ceramic suspensions suitable for stereolithography , 1998 .

[16]  H. Liao.  Stereolithography using compositions containing ceramic powders , 1997 .

[17]  C. G. Roffey.  Photopolymerization of surface coatings , 1982 .