A Review of the Contribution of Mechanomutable Asphalt Materials Towards Addressing the Upcoming Challenges of Asphalt Pavements

In the coming years, asphalt materials will face significant challenges due to the demand for smart multifunctional materials in transportation infrastructures, designed under sustainability criteria. Asphalt pavements will not only have to contribute towards the provision of an adequate surface for the transportation of different types of vehicles, but will need to do so considering the increased loads that they will have to support, as well as the extreme weather conditions resulting from climate change. These pavements will also need the capacity to interact with autonomous vehicles and provide information to the users and maintenance agencies regarding traffic data or performance levels. This paper describes how mechanomutable asphalt materials (MAMs) could enhance the properties of asphalt materials, enabling their use as a solution for smart infrastructures.

[1]  G. Trichês,et al.  Experimental evaluation of the influence of reinforcement with Multi-Walled Carbon Nanotubes (MWCNTs) on the properties and fatigue life of hot mix asphalt , 2018 .

[2]  G. Iglesias,et al.  Mechanical performance of mechanomutable asphalt binders under cyclic creep and recovery loads , 2016 .

[3]  Mohd Rosli Mohd Hasan,et al.  Investigation of induction healing effects on electrically conductive asphalt mastic and asphalt concrete beams through fracture-healing tests , 2013 .

[4]  Athanasios V. Vasilakos,et al.  Secure message propagation protocols for IoVs communication components , 2020, Comput. Electr. Eng..

[5]  Manfred N. Partl,et al.  Experimental evaluation of dense asphalt concrete properties for induction heating purposes , 2013 .

[6]  Hong Wang,et al.  Study of ice and snow melting process on conductive asphalt solar collector , 2011 .

[7]  Hongduo Zhao,et al.  Self-healing efficiency of ferrite-filled asphalt mixture after microwave irradiation , 2017 .

[8]  Zhanping You,et al.  Investigation of microwave healing performance of electrically conductive carbon fiber modified asphalt mixture beams , 2016 .

[9]  Zongjin Li,et al.  Investigation on Electrically Conductive Aggregates Produced by Incorporating Carbon Fiber and Carbon Black , 2017 .

[10]  Shaopeng Wu,et al.  Utilization of gneiss coarse aggregate and steel slag fine aggregate in asphalt mixture , 2015 .

[11]  Zhenjun Wang,et al.  Utilization of magnetite tailings as aggregates in asphalt mixtures , 2016 .

[12]  Isaac Martín de Diego,et al.  Modeling multi-agent systems to simulate sensor-based Smart Roads , 2020, Simul. Model. Pract. Theory.

[13]  Jianjun Zheng,et al.  Concrete pavement deicing with carbon fiber heating wires , 2011 .

[14]  Shaopeng Wu,et al.  Study on the effective composition of steel slag for asphalt mixture induction heating purpose , 2018, Construction and Building Materials.

[15]  M. Sol-Sánchez,et al.  Exploring the recovery of fatigue damage in bituminous mixtures: the role of healing , 2015 .

[16]  Yue Xiao,et al.  Conductive asphalt concrete: A review on structure design, performance, and practical applications , 2015 .

[17]  Gulsah Akar,et al.  Effects of neighborhood environments on perceived risk of self-driving: evidence from the 2015 and 2017 Puget Sound Travel Surveys , 2019, Transportation.

[18]  Shaopeng Wu,et al.  Properties evaluation of asphalt-based composites with graphite and mine powders , 2008 .

[19]  Devesh Pratap Singh,et al.  Intrusion Detection Protocols in Wireless Sensor Networks Integrated to Internet of Things Deployment: Survey and Future Challenges , 2020, IEEE Access.

[20]  G. Iglesias,et al.  Experimental evaluation of using stainless steel slag to produce mechanomutable asphalt mortars for their use in smart materials , 2016 .

[21]  F. Gámiz,et al.  Mechanical and thermal properties of graphene modified asphalt binders , 2018, Construction and Building Materials.

[22]  Shuaicheng Guo,et al.  Laboratory performance evaluation of both flake graphite and exfoliated graphite nanoplatelet modified asphalt composites , 2017 .

[23]  Martin van de Ven,et al.  Induction healing of asphalt mastic and porous asphalt concrete , 2011 .

[24]  D. Eisenberg,et al.  Effects of snowfalls on motor vehicle collisions, injuries, and fatalities. , 2005, American journal of public health.

[25]  J. Su,et al.  Rheological behaviour of bitumen blending with self-healing microcapsule: Effects of physical and chemical interface structures , 2020 .

[26]  Alvaro Garcia,et al.  Self-healing of asphalt mixture by microwave and induction heating , 2016 .

[27]  Dooyeol Yoo,et al.  Self-healing capability of asphalt concrete with carbon-based materials , 2019, Journal of Materials Research and Technology.

[28]  M. Mounir Bou-Ali,et al.  Magnetorheological fluids: characterization and modeling of magnetization , 2009 .

[29]  Xuefang Chen,et al.  Preparation and microwave absorption properties of asphalt carbon coated reduced graphene oxide/magnetic CoFe2O4 hollow particles modified multi-wall carbon nanotube composites , 2017 .

[30]  Erik Schlangen,et al.  Induction heating of mastic containing conductive fibers and fillers , 2011 .

[31]  M. Khabiri,et al.  Mechanical and moisture susceptibility properties of HMA containing ferrite for their use in magnetic asphalt , 2016 .

[32]  G. Iglesias,et al.  Development of mechanomutable asphalt binders for the construction of smart pavements , 2015 .

[33]  Su Nguyen,et al.  Online Incremental Machine Learning Platform for Big Data-Driven Smart Traffic Management , 2019, IEEE Transactions on Intelligent Transportation Systems.

[34]  G. Iglesias,et al.  Theoretical and experimental evaluation of the flow behavior of a magnetorheological damper using an extremely bimodal magnetic fluid , 2014 .

[35]  Martin van de Ven,et al.  A simple model to define induction heating in asphalt mastic , 2012 .

[36]  P. Lastra-González,et al.  Effect of air voids content on asphalt self-healing via induction and infrared heating , 2016 .

[37]  F. Giustozzi,et al.  Mining materials to generate magnetically-triggered induction healing of bitumen on smart road pavements , 2018 .

[38]  F. Nejad,et al.  Induction heating and healing of carbon black modified asphalt concrete under microwave radiation , 2018, Construction and Building Materials.

[39]  Zhenjun Wang,et al.  Laboratory investigation on deicing characteristics of asphalt mixtures using magnetite aggregate as microwave-absorbing materials , 2016 .

[40]  T. A. Langen,et al.  Winter road management effects on roadside soil and vegetation along a mountain pass in the Adirondack Park, New York, USA. , 2018, Journal of environmental management.

[41]  L. Fay,et al.  Deicer Impacts on Pavement Materials: Introduction and Recent Developments , 2009 .

[42]  Shaopeng Wu,et al.  Study on the graphite and carbon fiber modified asphalt concrete , 2011 .

[43]  S. Vansteenkiste,et al.  Effect of bitumen properties in the induction healing capacity of asphalt mixes , 2018, Construction and Building Materials.

[44]  Fernando Moreno-Navarro,et al.  Encoded asphalt materials for the guidance of autonomous vehicles , 2019, Automation in Construction.

[45]  Moo Sun Kim,et al.  Thermal modeling of railroad with installed snow melting system , 2015 .

[46]  J. M. Manso,et al.  EAF slag in asphalt mixes: A brief review of its possible re-use , 2017 .

[47]  Erkut Yalçın,et al.  Mechanical and Self-Healing Properties of Stone Mastic Asphalt Containing Encapsulated Rejuvenators , 2019, Journal of Materials in Civil Engineering.

[48]  Daniel Jato-Espino,et al.  Optimizing the valorization of industrial by-products for the induction healing of asphalt mixtures , 2019, Construction and Building Materials.

[49]  M. Elseifi,et al.  Evaluation of Self-Healing of Asphalt Concrete through Induction Heating and Metallic Fibers , 2017 .

[50]  M. Cuthbert,et al.  Highway deicing salt dynamic runoff to surface water and subsequent infiltration to groundwater during severe UK winters. , 2016, The Science of the total environment.

[51]  J. Su,et al.  Smart bituminous material combining anti-icing and self-healing functions using electrothermal graphene microcapsules containing oily rejuvenator , 2019, Construction and Building Materials.

[52]  Kwesi Mensah,et al.  Review of technologies for snow melting systems , 2015 .

[53]  Huajun Wang,et al.  Experimental investigation of hydronic snow melting process on the inclined pavement , 2010 .

[55]  K. Gopalakrishnan,et al.  Electrically-conductive asphalt mastic: Temperature dependence and heating efficiency , 2018, Materials & Design.

[56]  P. Leiva-Padilla,et al.  Analysis of the mechanical response of asphalt materials manufactured with metallic fibres under the effect of magnetic fields , 2019, Smart Materials and Structures.

[57]  Paweł Skalski,et al.  Role of Magnetorheological Fluids and Elastomers in Today’s World , 2017 .

[58]  Hongduo Zhao,et al.  High-Efficiency Heating Characteristics of Ferrite-Filled Asphalt-Based Composites under Microwave Irradiation , 2017 .