Influence of mineralogy on the hydraulic properties of ladle slag

Abstract The present study is aimed at investigating the hydraulic characteristics of ladle furnace slag (LFS), under the pretence of using LFS as a cement substitute in certain applications. Furthermore, LFS has been considered as a possible activator in a blend containing 50% LFS, and 50% ground granulated blast furnace slag (GGBFS). Phases detected in LFS were quantified using Rietveld analysis. Calorimetric studies were performed at 20, 25 and 30 °C in order to calculate the apparent activation energy of hydration and thereby to suggest a kinetic model for the tested compositions within this temperature interval. In addition, compressive strength tests were performed on mortar prisms made with LFS, and LFS/GGBFS which had hydrated for 2, 7 and 28 days. Both compositions reached acceptable early strengths, (e.g. LFS, 33.1 MPa, and LFS/GGBFS, 17.9 MPa, after 2 days), but after 28 days hydration the blend was superior to neat LFS. Related apparent activation energies were determined using an Avrami–Erofeev model and gave E a  = 58 kJ/mol for neat LFS and E a  = 63 kJ/mol for the blend. The results imply that LFS or a LFS/GGBFS blend can be favourably used as supplement in binder applications such as binder in by-product metallurgical briquettes, which are used as recycle to the blast furnace or basic oxygen furnace depending on the specific briquette composition.

[1]  F. Hanic,et al.  Hydration and hydraulic properties of the Q phase in the system CaOAl2O3MgOH2O referred to high alumina cements , 1989 .

[2]  P. Brown,et al.  A kinetic model for the hydration of tricalcium silicate , 1985 .

[3]  J. Setién,et al.  Characterization of ladle furnace basic slag for use as a construction material , 2009 .

[4]  N. Ukrainczyk.  Kinetic modeling of calcium aluminate cement hydration , 2010 .

[5]  I. Odler.  Special Inorganic Cements , 2000 .

[6]  J. Ideker,et al.  Calcium Aluminate Cements , 2019, Lea's Chemistry of Cement and Concrete.

[7]  F. Lea.  The chemistry of cement and concrete , 1970 .

[8]  E. Viggh,et al.  Steelmaking slags as raw material for sulphoaluminate belite cement , 2007 .

[9]  Crystallization of CaO−Al2O3−SiO2 and CaO−MO−Al2O3−SiO2 (M=Mg, Zn) glasses , 1989 .

[10]  B. Singh,et al.  Hydration of mixtures of C12A7 and granulated blastfurnace slag , 1989 .

[11]  John Bensted,et al.  Structure and Performance of Cements , 2001 .

[12]  E. Viggh,et al.  Hydraulic properties of sulphoaluminate belite cement based on steelmaking slags , 2007 .

[13]  P. K. Mehta,et al.  Investigations on hydraulic cements from spent oil shale , 1980 .

[14]  Steve Millard,et al.  Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies , 2006 .

[15]  A. Chatterji,et al.  Hydration of Portland Cement , 1965, Nature.

[16]  E. Chaniotakis,et al.  High-alumina cement production from FeNi-ERF slag, limestone and diasporic bauxite , 2004 .

[17]  H. Midgley,et al.  Formation of stratlingite, 2CaO.SiO2.Al2O3.8H2O, in relation to the hydration of high alumina cement☆ , 1978 .