论文信息 - Resin Flow During the Cure of Fiber Reinforced Composites

Resin Flow During the Cure of Fiber Reinforced Composites

Experiments were performed studying resin flow during the cure of fiber reinforced, organic matrix composites using a system in which the resin was simulated by viscous liquids and the fibers either by layers of thin rods or by layers of porous plates. The flow pattern was observed and the flow rate was measured for different applied pressures. The data were compared to the results of the Springer-Loos model and excellent agreement was found bet ween the data and the model.

George S. Springer | G. Springer

[1] J. Throne,et al. Non-isothermal curing of reactive plastics , 1975 .

[2] Christopher W. Macosko,et al. Heat transfer and curing in polymer reaction molding , 1976 .

[3] A. Malkin,et al. Non‐isothermal phenomena in polymer engineering and science: A review. Part I: Non‐isothermal polymerization , 1979 .

[4] Roberto J. J. Williams,et al. Critical parameters for thermoset curing in heated molds , 1979 .

[5] D. A. Caulk,et al. The effect of deformation and thermoset cure on heat conduction in a chopped-fiber reinforced polyester during compression molding , 1979 .

[6] Calculation of Cure Process Variables During Cure of Graphite/Epoxy Composites , 1983 .

[7] C. Browning. Composite Materials: Quality Assurance and Processing , 1983 .