Determination of growth-induced strain and thermo-elastic properties of coatings by curvature measurements

Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

[1]  L. B. Freund,et al.  Some elementary connections between curvature and mismatch strain in compositionally graded thin films , 1996 .

[2]  Carl V. Thompson,et al.  Stress and grain growth in thin films , 1996 .

[3]  C. Hubbard,et al.  Neutron Diffraction Measurements of the Residual Stresses in Al2O3-ZrO2 (CeO2) Ceramic Composites , 1994 .

[4]  M. Larsson,et al.  DEFLECTION MEASUREMENTS AS METHOD TO DETERMINE RESIDUAL STRESS IN THIN HARD COATINGS ON TOOL MATERIALS , 1996 .

[5]  A. Giannakopoulos,et al.  Elastoplastic analysis of thermal cycling: Layered materials with sharp interfaces , 1994 .

[6]  F. Virginia Rohde.  Large deflections of a cantilever beam with uniformly distributed load , 1953 .

[7]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .

[8]  A. Evans,et al.  Residual stress cracking of metal/ceramic bonds , 1991 .

[9]  T. Clyne,et al.  The effect of residual stresses on the debonding of coatings—I. A model for delamination at a bimaterial interface , 1994 .

[10]  S. Timoshenko,et al.  Analysis of Bi-Metal Thermostats , 1925 .

[11]  T. Rowan.  Functional stability analysis of numerical algorithms , 1990 .

[12]  G. Stoney.  The Tension of Metallic Films Deposited by Electrolysis , 1909 .

[13]  Lars Berglund,et al.  Manufacturing and performance of RTM U-beams , 1997 .

[14]  Y-D. Lee,et al.  Residual/thermal stresses in FGM and laminated thermal barrier coatings , 1994 .

[15]  K. T. Scott,et al.  The interrelationship between internal stress, processing parameters and microstructure of physically vapour deposited and thermally sprayed coatings☆ , 1987 .

[16]  Jack R. Vinson,et al.  On the Hygrothermal Response of Laminated Composite Systems † , 1976 .

[17]  N. Salamon,et al.  Geometrically Nonlinear Stress-Deflection Relations for Thin Film/Substrate Systems With a Finite Element Comparison , 1994 .

[18]  Brian D. Harper,et al.  A geometrically nonlinear model for predicting the intrinsic film stress by the bending-plate method , 1990 .

[19]  N. Salamon,et al.  Geometrically nonlinear stress-deflection relations for thin film/substrate systems , 1993 .

[20]  M. Larsson,et al.  Tensile testing as a method for determining the Young's modulus of thin hard coatings , 1997 .

[21]  M. Ohring.  The Materials Science of Thin Films , 1991 .

[22]  Albert S. Kobayashi,et al.  Handbook on experimental mechanics , 1987 .

[23]  E. Macherauch,et al.  Residual Stress State of Brazed Ceramic/Metal Compounds, Determined by Analytical Methods and X-ray Residual Stress Measurements , 1990 .

[24]  F. Brotzen,et al.  Mechanical testing of thin films , 1994 .

[25]  Subra Suresh,et al.  Small and large deformation of thick and thin-film multi-layers: Effects of layer geometry, plasticity and compositional gradients , 1996 .

[26]  Anthony G. Evans,et al.  On the mechanics of delamination and spalling in compressed films , 1984 .

[27]  N. J. Salamon,et al.  Thin film stress from nonspherical substrate bending measurements , 1991 .

[28]  W. Cheng,et al.  Residual Stresses and Fracture Mechanics , 1995 .