Geometrically nonlinear analysis with a 4-node membrane element formulated by the quadrilateral area coordinate method

Recently, a 4-node quadrilateral membrane element AGQ6-I, has been successfully developed for analysis of linear plane problems. Since this model is formulated by the quadrilateral area coordinate method (QACM), a new natural coordinate system for developing quadrilateral finite element models, it is much less sensitive to mesh distortion than other 4-node isoparametric elements and free of various locking problems that arise from irregular mesh geometries. In order to extend these advantages of QACM to nonlinear applications, the total Lagrangian (TL) formulations of element AGQ6-I was established in this paper, which is also the first time that a plane QACM element being applied in the implicit geometrically nonlinear analysis. Numerical examples of geometrically nonlinear analysis show that the presented formulations can prevent loss of accuracy in severely distorted meshes, and therefore, are superior to those of other 4-node isoparametric elements. The efficiency of QACM for developing simple, effective and reliable serendipity plane membrane elements in geometrically nonlinear analysis is demonstrated clearly.

[1]  Song Cen,et al.  Quadrilateral membrane element family formulated by the quadrilateral area coordinate method , 2007 .

[2]  E. Wilson,et al.  A non-conforming element for stress analysis , 1976 .

[3]  Yuqiu Long,et al.  Generalized conforming triangular membrane element with vertex rigid rotational freedoms , 1994 .

[4]  Long Yu-qiu,et al.  Generalized conforming element for bending and buckling analysis of plates , 1989 .

[5]  Song Cen,et al.  Membrane elements insensitive to distortion using the quadrilateral area coordinate method , 2004 .

[6]  Lin Zhongqin,et al.  A quadrilateral thin shell element based on area co-ordinate for explicit dynamic analysis , 2002 .

[7]  Song Cen,et al.  The analytical element stiffness matrix of a recent 4‐node membrane element formulated by the quadrilateral area co‐ordinate method , 2006 .

[8]  Yabo Zhu,et al.  AN IMPROVED AREA-COORDINATE BASED QUADRILATERAL SHELL ELEMENT IN DYNAMIC EXPLICIT FEA , 2005 .

[9]  Song Cen,et al.  Application of the quadrilateral area coordinate method: a new element for laminated composite plate bending problems , 2007 .

[10]  S. Fenves.  Numerical and computer methods in structural mechanics , 1973 .

[11]  Ai Kah Soh,et al.  Development of a new quadrilateral thin plate element using area coordinates , 2000 .

[12]  K. Bathe,et al.  Effects of element distortions on the performance of isoparametric elements , 1993 .

[13]  Cen Song,et al.  Development of eight-node quadrilateral membrane elements using the area coordinates method , 2000 .

[14]  R. L. Harder,et al.  A proposed standard set of problems to test finite element accuracy , 1985 .

[15]  Yuqiu Long,et al.  Generalized conforming quadrilateral membrane element with vertex rigid rotational freedom , 1994 .

[16]  T. Belytschko,et al.  Element‐free Galerkin methods , 1994 .

[17]  Jeong Whan Yoon,et al.  Enhanced one‐point quadrature shell element for nonlinear applications , 2002 .

[18]  Song Cen,et al.  A new quadrilateral area coordinate method (QACM‐II) for developing quadrilateral finite element models , 2008 .

[19]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[20]  Jeong Whan Yoon,et al.  A new approach to reduce membrane and transverse shear locking for one‐point quadrature shell elements: linear formulation , 2006 .

[21]  Song Cen,et al.  Some basic formulae for area co-ordinates in quadrilateral elements , 1999 .

[22]  Song Cen,et al.  Application of the quadrilateral area co‐ordinate method: a new element for Mindlin–Reissner plate , 2006 .

[23]  J. C. Simo,et al.  Geometrically non‐linear enhanced strain mixed methods and the method of incompatible modes , 1992 .

[24]  Michel Brunet,et al.  Analysis of a rotation‐free 4‐node shell element , 2006 .

[25]  Song Cen,et al.  Area co-ordinates used in quadrilateral elements , 1999 .

[26]  Xu Yin,et al.  Generalized conforming plate bending elements using point and line compatibility conditions , 1995 .

[27]  K. E. Bisshopp,et al.  Large deflection of cantilever beams , 1945 .

[28]  Edward L. Wilson,et al.  Incompatible Displacement Models , 1973 .