Numerical investigation of tip clearance effects in an axial transonic compressor

Numerical investigations of the Darmstadt transonic single stage compressor (DTC), in the Rotor1-Stator1 configuration, aimed at advancing the understanding of the effect of different rotor tip gaps and transition modelling on the blade surfaces are presented. Steady three dimensional Reynolds Averaged Navier Stokes (RANS) simulations were performed to obtain the flow fields for the different configurations at different operating conditions using the RANS-Solver TRACE. The stage geometry and the multi-block structured grid were generated by G3DMESH and a grid sensitivity analysis was conducted. For the clearance gap region, a fully gridded special H-grid was chosen. Comparisons were made between the flow characteristic at design speed, representative for a transonic flow regime, and at 65% speed, representative for a subsonic flow regime. The computations were used to analyse the flow phenomena through the tip clearance region for the different configurations and their impact on the performance of the compressor stage.

[1]  Edmund Kügeler,et al.  Modifications of a Two-Equation Turbulence Model for Turbomachinery Fluid Flows , 2004 .

[2]  Edmund Kügeler,et al.  Investigation of Unsteady Flow Effects in an Axial Compressor Based on Whole Annulus Computations , 2010 .

[3]  Mark L. Celestina,et al.  Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor Rotor , 1996 .

[4]  William N. Dawes,et al.  A Numerical Analysis of the Three-Dimensional Viscous Flow in a Transonic Compressor Rotor and Comparison With Experiment , 1987 .

[5]  C.Hah,et al.  Tip-Clearance Variations of an Axial High-Speed Single-Stage Transonic Compressor , 2005 .

[6]  Paul C. Ivey,et al.  Parametric Study of Tip Clearance—Casing Treatment on Performance and Stability of a Transonic Axial Compressor , 2004 .

[7]  Hans-Peter Kersken,et al.  Toward Excellence in Turbomachinery Computational Fluid Dynamics: A Hybrid Structured-Unstructured Reynolds-Averaged Navier-Stokes Solver , 2006 .

[8]  Dragan Kozulovic.  Application of a Multimode Transition Model to Turbomachinery Flows , 2007 .

[9]  N. A. Cumpsty,et al.  Flow Phenomena in Compressor Casing Treatment , 1984 .

[10]  Heinz-Peter Schiffer,et al.  Experimental and Numerical Analysis of Axial Skewed Slot Casing Treatments for a Transonic Compressor Stage , 2009 .

[11]  Heinz-Peter Schiffer,et al.  SHORT LENGTH-SCALE ROTATING STALL INCEPTION IN A TRANSONIC AXIAL COMPRESSOR - CRITERIA AND MECHANISMS , 2006 .

[12]  Michael D. Hathaway,et al.  Recommendations for Achieving Accurate Numerical Simulation of Tip Clearance Flows in Transonic Compressor Rotors , 2000 .

[13]  Chunill Hah,et al.  Experimental and Computational Investigation of Stepped Tip Gap Effects on the Flowfield of a Transonic Axial-Flow Compressor Rotor , 1998 .