Numerical Simulation of the Pilot-Scale High-Density Circulating Fluidized Bed Riser

[1]  A. Yu,et al.  Discrete particle simulation of heterogeneous gas-solid flows in riser and downer reactors , 2020 .

[2]  Behdad Moghtaderi,et al.  Heat transfer modelling in Discrete Element Method (DEM)-based simulations of thermal processes: Theory and model development , 2020 .

[3]  Junwu Wang.  Continuum theory for dense gas-solid flow: A state-of-the-art review , 2020 .

[4]  Aibing Yu,et al.  CFD-DEM modelling and simulation of pneumatic conveying: A review , 2020 .

[5]  W. Ge,et al.  Scale and structure dependent drag in gas–solid flows , 2020 .

[6]  W. Ge,et al.  EMMS-based solid stress model for the multiphase particle-in-cell method , 2020 .

[7]  Jinsen Gao,et al.  Experimental Study of Solids Motion in an 18 m Gas–Solids Circulating Fluidized Bed with High Solids Flux , 2019 .

[8]  A. Yu,et al.  How to generate valid local quantities of particle–fluid flows for establishing constitutive relations , 2019, AIChE Journal.

[9]  Jinsen Gao,et al.  Effects of Operating Parameters on Solids Flux in a High-Density/-Flux Circulating Fluidized Bed Riser Reactor , 2019, Energy & Fuels.

[10]  Xiaogang Shi,et al.  Full‐Loop Simulation of Gas‐Solids Flow in a Pilot‐Scale Circulating Fluidized Bed , 2019, Chemical Engineering & Technology.

[11]  Jesse Zhu,et al.  Axial and radial development of solids holdup in a high flux/density gas–solids circulating fluidized bed , 2014 .

[12]  Jinghai Li,et al.  Three-dimensional simulation of dense suspension upflow regime in high-density CFB risers with EMMS-based two-fluid model , 2014 .

[13]  Aibing Yu,et al.  Gas–Solid Flow and Energy Dissipation in Inclined Pneumatic Conveying , 2012 .

[14]  Jinghai Li,et al.  Eulerian simulation of gas-solid flows with particles of Geldart groups A, B and D using EMMS-based meso-scale model , 2011 .

[15]  Xiaoping Chen,et al.  Lateral solids dispersion coefficient in large-scale fluidized beds , 2010 .

[16]  Ray Cocco,et al.  Particle clusters in and above fluidized beds , 2010 .

[17]  Rui Xiao,et al.  Modeling on High-Flux Circulating Fluidized Bed with Geldart Group B Particles by Kinetic Theory of Granular Flow , 2010 .

[18]  Wei Wang,et al.  Searching for a mesh-independent sub-grid model for CFD simulation of gas–solid riser flows , 2009 .

[19]  Xuezhi Wu,et al.  Numerical simulation and experimental validation of gas-solid flow in the riser of a dense fluidized bed reactor , 2009 .

[20]  Jam Hans Kuipers,et al.  Why the two-fluid model fails to predict the bed expansion characteristics of Geldart A particles in gas-fluidized beds: A tentative answer , 2009 .

[21]  Atsushi Tsutsumi,et al.  Effects of solids feeder and riser exit configuration on establishing high density circulating fluidized beds , 2008 .

[22]  L. M. Rosa,et al.  Modelling and simulation of a gas–solids dispersion flow in a high-flux circulating fluidized bed (HFCFB) riser , 2008 .

[23]  F. R. Steward,et al.  New closure models for CFD modeling of high-density circulating fluidized beds , 2006 .

[24]  Jam Hans Kuipers,et al.  A Lattice-Boltzmann simulation study of the drag coefficient of clusters of spheres , 2006 .

[25]  Y. Forterre,et al.  A constitutive law for dense granular flows , 2006, Nature.

[26]  Jam Hans Kuipers,et al.  From discrete particle model to a continuous model of Geldart A particles , 2005 .

[27]  Hsiaotao Bi,et al.  Flow behavior and regime transition in a high-density circulating fluidized bed riser , 2004 .

[28]  P. Gayán,et al.  Circulating fluidised bed co-combustion of coal and biomass , 2004 .

[29]  Changning Wu,et al.  Experimental study of high-density gas-solids flow in a new coupled circulating fluidized bed , 2004 .

[30]  Jam Hans Kuipers,et al.  A numerical study of fluidization behavior of Geldart A particles using a discrete particle model , 2004 .

[31]  Jesse Zhu,et al.  Characterizing particle aggregates in a high-density and high-flux CFB riser , 2002 .

[32]  A. Yu,et al.  Averaging method of granular materials. , 2002, Physical review. E, Statistical, nonlinear, and soft matter physics.

[33]  T. S. Pugsley,et al.  Radial solid mass flux profiles in a high-suspension density circulating fluidized bed , 2002 .

[34]  Jesse Zhu,et al.  Axial and radial solids distribution in a long and high‐flux CFB riser , 2001 .

[35]  L. Reh,et al.  On viscous momentum transfer by solids in gas–solids flow through risers , 2001 .

[36]  Hsiaotao Bi,et al.  Suspension densities in a high-density circulating fluidized bed riser , 1999 .

[37]  Hsiaotao Bi,et al.  Situating the high‐density circulating fluidized bed , 1999 .

[38]  Dimitri Gidaspow,et al.  Computation of circulating fluidized-bed riser flow for the Fluidization VIII benchmark test , 1999 .

[39]  Yong Jin,et al.  Profiles of particle velocity and solids fraction in a high-density riser , 1998 .

[40]  Dimitri Gidaspow,et al.  Equation of state and radial distribution functions of FCC particles in a CFB , 1998 .

[41]  L. Fan.  Multiphase flow and fluidization: Continuum and kinetic theory descriptions. By Dimitri Gidaspow, Academic Press, New York, 1994, 467 pp., $69.50 , 1996 .

[42]  Yong Jin,et al.  The characteristics of cluster in a high density circulating fluidized bed , 1995 .

[43]  Jesse Zhu,et al.  Distinctions between low density and high density circulating fluidized beds , 1995 .

[44]  M. Syamlal,et al.  MFIX documentation theory guide , 1993 .

[45]  Hsiaotao Bi,et al.  Static instability analysis of circulating fluidized beds and concept of high‐density risers , 1993 .

[46]  Goodarz Ahmadi,et al.  A thermodynamical formulation for dispersed multiphase turbulent flows. II: Simple shear flows for dense mixtures , 1990 .

[47]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[48]  D. Geldart.  Types of gas fluidization , 1973 .

[49]  Wei Wang,et al.  Simulation of gas-solid two-phase flow by a multi-scale CFD approach - Extension of the EMMS model to the sub-grid level , 2007 .

[50]  Rodney J. Dry,et al.  Applications of CFB technology to gas—solid reactions , 1997 .