Thrust Nozzle Design Study for a Quasi-Axisymmetric Scramjet-Powered Vehicle

The design of a nozzle of an unfueled quasi-axisymmetric scramjet model is optimized for minimum drag for a Mach 8 flight condition. The approach to the nozzle design is to develop a simple force-prediction methodology in an optimization study. The study is completed for an unfueled configuration, but the approach could be used for fueled configuration by including appropriate combustion modeling. The effects of the nozzle design on the overall vehicle performance are included. The overall drag of the baseline model for the optimization study was measured in the T4 shock tunnel for Mach numbers ranging from 5.7 to 10.3, confirming the suitability of the force-prediction methodology. The results of the nozzle-optimization study show that performance is limited by the nozzle area ratio that can be incorporated into the vehicle without leading to too large of a base diameter of the vehicle and increasing the external drag of the vehicle. The drag of vehicle designs at different flight Mach numbers is investigated in a parametric study for Mach numbers from 6 to 10. The results confirm that longer nozzles are better at higher Mach numbers. Copyright © 2010 by the American Institute of Aeronautics and Astronautics, Inc.

[1]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..

[2]  R. Stalker.  Waves and thermodynamics in high Mach number propulsive ducts , 1991 .

[3]  Mauro Valorani,et al.  Optimal supersonic intake design for air collection engines (ACE) , 1999 .

[4]  S. Kalt,et al.  Conical rocket nozzle performance under flow- separated conditions , 1965 .

[5]  Peter A. Jacobs,et al.  Background oriented schlieren for flow visualisation in hypersonic impulse facilities , 2007 .

[6]  David J. Mee.  Uncertainty Analysis of Conditions in the Test Section of the T4 Shock Tunnel , 1993 .

[7]  M. Knell.  Calibration of a MACH 7.6 nozzle , 2003 .

[8]  R. G. Morgan,et al.  Transition of compressible high enthalpy boundary layer flow over a flat plate , 1994, The Aeronautical Journal (1968).

[9]  Raymond J. Stalker,et al.  Control of Hypersonic Turbulent Skin Friction by Boundary-Layer Combustion of Hydrogen , 2005 .

[10]  A. Shapiro.  The dynamics and thermodynamics of compressible fluid flow. , 1953 .

[11]  Michael K. Smart,et al.  Computational Investigation of the Performance and Back-Pressure Limits of a Hypersonic Inlet , 2002 .

[12]  R. C. Rogers,et al.  Flow establishment in a generic scramjet combustor , 1990 .

[13]  Ryan P. Starkey,et al.  Critical Design Issues for Airbreathing Hypersonic Waverider Missiles , 2001 .

[14]  Allan Paull,et al.  Performance of a Scramjet Combustor with Combined Normal and Tangential Fuel Injection , 2006 .

[15]  Roy J. Hartfield,et al.  Scramjet missile design using genetic algorithms , 2006, Appl. Math. Comput..

[16]  R. J. Stalker,et al.  Mach 4 and Mach 8 axisymmetric nozzles for a high-enthalpy shock tunnel , 1991, The Aeronautical Journal (1968).

[17]  Peter A. Jacobs,et al.  Drag force on quasi-axisymmetric scramjets at various flight Mach numbers: theory and experiment , 2009 .

[18]  E. Spiegler,et al.  Shock-Induced Boundary Layer Separation in Over-Expanded Conical Exhaust Nozzles , 1963 .

[19]  Sean Tuttle,et al.  Drag measurements at Mach 5 using a stress wave force balance , 1995 .

[20]  T. V. Jones,et al.  Design and Test of a Hypersonic Isentropic-Spike Intake with Aligned Cowl , 2005 .

[21]  S R Sanderson,et al.  Drag balance for hypervelocity impulse facilities , 1991 .

[22]  Sadatake Tomioka,et al.  Performance of supersonic combustors with fuel injection in diverging section , 2004 .

[23]  Hans G. Hornung.  28th Lanchester memorial lecture. Experimental real-gas hypersonics , 1988 .

[24]  Allan Paull,et al.  Experiments on supersonic combustion ramjet propulsion in a shock tunnel , 1995, Journal of Fluid Mechanics.

[25]  Peter A. Jacobs,et al.  Simulation and Optimization of Heated, Inviscid Flows in Scramjet Ducts , 1999 .

[26]  W. Boehm,et al.  Bezier and B-Spline Techniques , 2002 .

[27]  T. J. Goldberg,et al.  Turbulent-Flow Separation Criteria for Overexpanded Supersonic Nozzles , 1978 .

[28]  Ryan P. Starkey,et al.  Axisymmetric Inlet Design for Combined-Cycle Engines , 2006 .

[29]  G. L. Romine.  Nozzle flow separation , 1998 .

[30]  G. Degrez,et al.  Surface phenomena in a three-dimensional skewed shock wave/laminar boundary-layer interaction , 1984 .

[31]  R. J. Stalker,et al.  The Free-Piston Shock Tube , 1966 .

[32]  R. G. Morgan,et al.  Effects of hydrogen–air non–equilibrium chemistry on the performance of a model scramjet thrust nozzle , 2004, The Aeronautical Journal (1968).

[33]  E. H. Andrews,et al.  NASA's Hypersonic Research Engine Project: A review , 1994 .

[34]  Raymond J. Stalker,et al.  Glancing interactions between single and intersecting oblique shock waves and a turbulent boundary layer , 1986, Journal of Fluid Mechanics.

[35]  Allan Paull,et al.  Scramjets and shock tunnels—The Queensland experience , 2005 .