Silicon Germanium as a Novel Mask for Silicon Deep Reactive Ion Etching

This paper reports on the use of p-type polycrystalline silicon germanium (poly-Si<sub>1-x</sub>Ge<sub>x</sub>) thin films as a new masking material for the cryogenic deep reactive ion etching (DRIE) of silicon. We investigated the etching behavior of various poly-Si<sub>1-x</sub>Ge<sub>x</sub>:B (0<;x<; 1) thin films deposited at a wide temperature range (250°C to 600 °C). Etching selectivity for silicon, silicon oxide, and photoresist was determined at different etching temperatures, ICP and RF powers, and SF<sub>6</sub> to O<sub>2</sub> ratios. The study demonstrates that the etching selectivity of the SiGe mask for silicon depends strongly on three factors: Ge content; boron concentration; and etching temperature. Compared to conventional SiO<sub>2</sub> and SiN masks, the proposed SiGe masking material exhibited several advantages, including high etching selectivity to silicon (>1:800). Furthermore, the SiGe mask was etched in SF<sub>6</sub>/O<sub>2</sub> plasma at temperatures ≥ - 80°C and at rates exceeding 8 μm/min (i.e., more than 37 times faster than SiO<sub>2</sub> or SiN masks). Because of the chemical and thermodynamic stability of the SiGe film as well as the electronic properties of the mask, it was possible to deposit the proposed film at CMOS backend compatible temperatures. The paper also confirms that the mask can easily be dry-removed after the process with high etching rate by controlling the ICP and RF power and the SF<sub>6</sub> to O<sub>2</sub> ratios, and without affecting the underlying silicon substrate. Using low ICP and RF power, elevated temperatures (i.e., > - 80°C), and an adjusted O<sub>2</sub>:SF<sub>6</sub> ratio (i.e., ≈ 6%), we were able to etch away the SiGe mask without adversely affecting the final profile. Ultimately, we were able to develop deep silicontrenches with high aspect ratio etching straight profiles.

[1]  A. Scherer,et al.  Techniques of Cryogenic Reactive Ion Etching in Silicon for Fabrication of Sensors , 2009 .

[2]  A Scherer,et al.  Alumina etch masks for fabrication of high-aspect-ratio silicon micropillars and nanopillars , 2009, Nanotechnology.

[3]  Ann Witvrouw,et al.  Optimal conditions for micromachining Si1- xGex at 210 °C , 2007 .

[4]  Sami Franssila,et al.  Mask material effects in cryogenic deep reactive ion etching , 2007 .

[5]  B.Y. Majlis,et al.  Deep Trenches in Silicon Structure using DRIE Method with Aluminum as an Etching Mask , 2006, 2006 IEEE International Conference on Semiconductor Electronics.

[6]  A. Stevens,et al.  Surface roughness in XeF2 etching of a-Si/c-Si(100). [Erratum to document cited in CA143:121009] , 2006 .

[7]  Zhitang Song,et al.  Thermal annealing effects on the structure and electrical properties of Al2O3 gate dielectrics on fully depleted SiGe on insulator , 2006 .

[8]  M. Boufnichel,et al.  Origin, control and elimination of undercut in silicon deep plasma etching in the cryogenic process , 2005 .

[9]  Miko Elwenspoek,et al.  Guidelines for etching silicon MEMS structures using fluorine high-density plasmas at cryogenic temperatures , 2002 .

[10]  Ivan Hotovy,et al.  Influence of gas composition and the mask materials on the etch profile of dry-etched structures in silicon , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[11]  J. Fluitman,et al.  A survey on the reactive ion etching of silicon in microtechnology , 1996 .

[12]  G. Vaglio,et al.  Fourier transform-ion cyclotron resonance study of the gas-phase acidities of germane and methylgermane; Bond dissociation energy of germane , 1993, Journal of the American Society for Mass Spectrometry.

[13]  A. Bright,et al.  Doping effects in reactive plasma etching of heavily doped silicon , 1985 .

[14]  C. J. Mogab,et al.  Anisotropic plasma etching of polysilicon , 1980 .