Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites

Abstract A transient three-dimensional model for describing fluid flow characteristics and particles migration behavior within the melt pool during selective laser melting (SLM) of TiC/AlSi10Mg nanocomposites was developed. The powder-solid transition, variation of thermophysical properties, and surface tension were considered in the model. The influence of laser energy per unit length (LEPUL) on heat and mass transfer, melt pool dynamics, and particles rearrangement was investigated. It showed that the Marangoni convection became more vigorous with an increase of LEPUL, accordingly enhancing the thermal capillary force. The high laser energy input induced a sufficient liquid formation and an improved wettability, lowering the friction force exerting on TiC solids. Under this condition, the reinforcing particles can be well mixed within the matrix. The experimental study on the distribution state of TiC reinforcement in the SLM-processed Al matrix was performed. The results validated that the dispersion of TiC reinforcement changed from a severe aggregation to a uniform dispersion in the matrix with the increase of LEPUL. The TiC reinforcement experienced a microstructural variation from the standard nanoscale structure with a mean particle size of 70–90 nm to the relatively coarsened submicron morphology with an average particle size of 134 nm as LEPUL increased.

[1]  J. Schoenung,et al.  Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations , 2008 .

[2]  M. M. Chen,et al.  Effect of surface tension gradient driven convection in a laser melt pool: Three‐dimensional perturbation model , 1988 .

[3]  Jyoti Mazumder,et al.  A two-dimensional transient model for convection in laser melted pool , 1984 .

[4]  R. Guthrie,et al.  The physical properties of liquid metals , 1988 .

[5]  R. Poprawe,et al.  Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures , 2013 .

[6]  Toshihiko Emi,et al.  Marangoni flow at the gas/melt interface of steel , 2003 .

[7]  L. Froyen,et al.  Light extinction in metallic powder beds : Correlation with powder structure , 2005 .

[8]  Zhang-fu Yuan,et al.  Surface tension of molten Al-Si alloy at temperatures ranging from 923 to 1123 K , 2008 .

[9]  D. Gu,et al.  Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments , 2014 .

[10]  H. Arik,et al.  Effect of mechanical alloying process on mechanical properties of α-Si3N4 reinforced aluminum-based composite materials , 2008 .

[11]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[12]  O. Kovalev,et al.  Multivortex convection of metal in molten pool with dispersed impurity induced by laser radiation , 2014 .

[13]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[14]  Lucas Dembinski,et al.  The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder , 2013 .

[15]  H. Akramifard,et al.  Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing , 2014 .

[16]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[17]  K. Arafune,et al.  Thermal and solutal Marangoni convection in In–Ga–Sb system , 1999 .

[18]  A. Ghosh,et al.  Fabrication of in situ TiC reinforced aluminum matrix composites , 2001 .

[19]  Norbert Pirch,et al.  Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting , 2014 .

[20]  Reinhart Poprawe,et al.  Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg , 2015 .

[21]  Tao Chen,et al.  A three-dimensional sharp interface model for self-consistent keyhole and weld pool dynamics in deep penetration laser welding , 2011 .

[22]  Fenggui Lu Xinhua TANGShun Yao Haichao Cui.  Particles migration behavior during laser keyhole welding of ZL101/TiB2 composites , 2012 .

[23]  L. Shaw,et al.  Finite element analysis of the effect of volume shrinkage during laser densification , 2005 .

[24]  Christ Glorieux,et al.  Photopyroelectric measurement of thermal conductivity of metallic powders , 2005 .

[25]  L. Froyen,et al.  Model of the primary rearrangement processes at liquid phase sintering and selective laser sintering due to biparticle interactions , 1999 .

[26]  Suhas S. Joshi,et al.  A finite element model to predict the ablation depth in pulsed laser ablation , 2010 .