Powder Mixed Electric Discharge Machining: An Innovative Surface Modification Technique to Enhance Fatigue Performance and Bioactivity of β-Ti Implant for Orthopedics Application
暂无分享,去创建一个
[1] L. Qi,et al. Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4V alloy , 2014 .
[2] M. Janeček,et al. Characterization of electric discharge machining, subsequent etching and shot-peening as a surface treatment for orthopedic implants , 2013 .
[3] A. Singh,et al. Ti based biomaterials, the ultimate choice for orthopaedic implants – A review , 2009 .
[4] Hong Hocheng,et al. Improvement of fatigue life of electrical discharge machined AISI D2 tool steel by TiN coating , 2001 .
[5] Mitsuo Niinomi,et al. Recent research and development in titanium alloys for biomedical applications and healthcare goods , 2003 .
[6] Sepideh Minagar,et al. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces. , 2012, Acta biomaterialia.
[7] Petr Harcuba,et al. The effect of microstructure on fatigue performance of Ti-6Al-4V alloy after EDM surface treatment for application in orthopaedics. , 2011, Journal of the mechanical behavior of biomedical materials.
[8] B. K. Vinayagam,et al. A study on nano-surface generation in electric discharge machining process using multi-wall carbon nanotubes , 2008 .
[9] Elsa Henriques,et al. Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM) , 2008 .
[10] R. Jothimurugan,et al. Performance of Additive Mixed Kerosene–Servotherm in Electrical Discharge Machining of Monel 400™ , 2016 .
[11] Petr Harcuba,et al. Fatigue endurance of Ti-6Al-4V alloy with electro-eroded surface for improved bone in-growth. , 2011, Journal of the mechanical behavior of biomedical materials.
[12] Pradeep Kumar,et al. Effect of Silicon Powder Mixed EDM on Machining Rate of AISI D2 Die Steel , 2007 .
[13] M. Gandolfi,et al. HyFlex EDM: superficial features, metallurgical analysis and fatigue resistance of innovative electro discharge machined NiTi rotary instruments. , 2016, International endodontic journal.
[14] Sanjeev Kumar,et al. Study of Surface Properties in Particulate-Reinforced Metal Matrix Composites (MMCs) Using Powder-Mixed Electrical Discharge Machining (EDM) , 2014 .
[15] P. K. Patowari,et al. Parametric Study of Electric Discharge Coating using Powder Metallurgical Green Compact Electrodes , 2014 .
[16] T. Muthuramalingam,et al. Influence of Discharge Current Pulse on Machinability in Electrical Discharge Machining , 2013 .
[17] B. S. Pabla,et al. Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining , 2015, Journal of Materials Engineering and Performance.
[18] B. S. Pabla,et al. Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy , 2017 .
[19] Mitsuo Niinomi,et al. Mechanical properties of biomedical titanium alloys , 1998 .
[20] K. Ou,et al. Effect of electrical-discharging on formation of nanoporous biocompatible layer on titanium , 2010 .
[21] J. Mathew,et al. Effect of Powder Mixed Dielectric on Material Removal and Surface Modification in Microelectric Discharge Machining of Ti-6Al-4V , 2016 .
[22] T. Tai,et al. Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks , 2009 .
[23] B. S. Pabla,et al. Electric discharge machining – A potential choice for surface modification of metallic implants for orthopedic applications: A review , 2016 .
[24] Todd M. Mower,et al. Degradation of titanium 6Al–4V fatigue strength due to electrical discharge machining , 2014 .
[25] P. Chu,et al. Surface modification of titanium, titanium alloys, and related materials for biomedical applications , 2004 .
[26] Harmesh Kumar. Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM) , 2015 .
[27] Tzu-Sen Yang,et al. Effect of Electrical Discharging on Formation of Nanoporous Biocompatible Layer on Ti-6Al-4V Alloys , 2013, Implant dentistry.
[28] A. Dvivedi,et al. Parametric Evaluation on Near-Dry Electric Discharge Machining , 2016 .
[29] Y. Wong,et al. Near-mirror-finish phenomenon in EDM using powder-mixed dielectric , 1998 .
[30] B. Singh,et al. Influences of Process Parameters on MRR Improvement in Simple and Powder-Mixed EDM of AA6061/10%SiC Composite , 2015 .
[31] Y. H. Guu,et al. High cycle fatigue of electrical-discharge machined AISI D2 tool steel , 2001 .
[32] J. Davim,et al. Role of Powder in the Machining of Al-10%Sicp Metal Matrix Composites by Powder Mixed Electric Discharge Machining , 2011 .
[33] Pradeep Kumar,et al. Technology and research developments in powder mixed electric discharge machining (PMEDM) , 2007 .
[34] Jatinder Kumar,et al. Experimental Investigation on Surface Characteristics in Powder-Mixed Electrodischarge Machining of AA6061/10%SiC Composite , 2014 .
[35] M. Janeček,et al. Innovative surface modification of Ti-6Al-4V alloy with a positive effect on osteoblast proliferation and fatigue performance. , 2014, Materials science & engineering. C, Materials for biological applications.
[36] Gao Yang,et al. Electro-spark alloying using graphite electrode on titanium alloy surface for biomedical applications , 2011 .
[37] M. Bačáková,et al. Surface treatment by electric discharge machining of Ti-6Al-4V alloy for potential application in orthopaedics. , 2012, Journal of the mechanical behavior of biomedical materials.
[38] Vinod Yadava,et al. Experimental modelling and optimisation of process parameters of hole drilling by electrical discharge machining of aerospace titanium alloy , 2015, Int. J. Manuf. Technol. Manag..
[39] W. Mueller,et al. The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys. , 2010, Dental materials : official publication of the Academy of Dental Materials.
[40] Tzu-Sen Yang,et al. Nanoporous biocompatible layer on Ti-6Al-4V alloys enhanced osteoblast-like cell response , 2013 .
[41] Chander Prakash,et al. Multi-objective optimization of powder mixed electric discharge machining parameters for fabrication of biocompatible layer on β-Ti alloy using NSGA-II coupled with Taguchi based response surface methodology , 2016 .
[42] J. Ciurana,et al. Biomedical production of implants by additive electro-chemical and physical processes , 2012 .
[43] M. Niinomi,et al. Development of new metallic alloys for biomedical applications. , 2012, Acta biomaterialia.
[44] M. Braic,et al. Characterization of the Ti-10Nb-10Zr-5Ta Alloy for Biomedical Applications. Part 1: Microstructure, Mechanical Properties, and Corrosion Resistance , 2013, Journal of Materials Engineering and Performance.
[45] Bülent Ekmekci,et al. Electrical Discharge Machining of Ti6Al4V in Hydroxyapatite Powder Mixed Dielectric Liquid , 2016 .
[46] M. Shabgard,et al. Ultrasonic Assisted Electrical Discharge Machining of Ti–6Al–4V Alloy , 2015 .
[47] Sanjeev Kumar,et al. Optimization of Parameters Using Conductive Powder in Dielectric for EDM of Super Co 605 with Multiple Quality Characteristics , 2014 .