Improvement of engine performance and emissions by biomass oil filter in diesel engine

[1]  Michael Dowling.  The Impact of Oil Formulation on Emissions from Diesel Engines , 1992 .

[2]  S. Florio,et al.  An Investigation on the Reduction of Lubricating Oil Impact on Diesel Exhaust Emissions , 1997 .

[3]  A. A. Abdel-Rahman,et al.  On the emissions from internal-combustion engines: a review , 1998 .

[4]  Haji Hassan Masjuki,et al.  Palm oil and mineral oil based lubricants—their tribological and emission performance , 1999 .

[5]  D. E. Richardson,et al.  Review of Power Cylinder Friction for Diesel Engines , 2000 .

[6]  S. Shukla,et al.  The role of sawdust in the removal of unwanted materials from water. , 2002, Journal of hazardous materials.

[7]  S. Shukla,et al.  Adsorption of chromium from aqueous solutions by maple sawdust. , 2003, Journal of hazardous materials.

[8]  J. Ghandhi,et al.  Lubricating Oil Contribution to Direct-Injection Two Stroke Engine Particulate Emissions , 2004 .

[9]  Ghazi A. Karim,et al.  Exhaust emissions from an SI engine operating on gaseous fuel mixtures containing hydrogen , 2005 .

[10]  Djuro Borak,et al.  Engine oil contribution to diesel exhaust emissions , 2006 .

[11]  Zhengyu Jin,et al.  Characterization of differently sized granule fractions of yellow pea, cowpea and chickpea starches after modification with acetic anhydride and vinyl acetate , 2007 .

[12]  R. Sun,et al.  Preparation of sugarcane bagasse cellulosic phthalate using an ionic liquid as reaction medium , 2007 .

[13]  R. Sun,et al.  Synthesis and characterization of novel cationic SCB hemicelluloses with a low degree of substitution , 2007 .

[14]  Victor W. Wong,et al.  Controlling Lubricant Acidity With an Oil Conditioning Filter , 2009 .

[15]  Evangelos G. Giakoumis,et al.  Lubricating oil effects on the transient performance of a turbocharged diesel engine , 2010 .

[16]  A K Agarwal,et al.  Karanja oil utilization in a direct-injection engine by preheating. Part 2: experimental investigations of engine durability and lubricating oil properties , 2010 .

[17]  K. Sathasivam,et al.  Adsorption Kinetics and Capacity of Fatty Acid-Modified Banana Trunk Fibers for Oil in Water , 2010 .

[18]  Mustafa Canakci,et al.  The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel–diesel fuel blends , 2012 .

[19]  Gequn Shu,et al.  The influence of lubricating oil on deposits formation in a diesel engine under the operation condition of high power density , 2013 .

[20]  Li-Ming Chu,et al.  Effects of surface forces and surface roughness on squeeze thin film of elastohydrodynamic lubricated spherical conjunction , 2013 .

[21]  Regeneration of Waste Lubricant Oil by Extraction–Flocculation Composite Refining , 2013 .

[22]  Erol Ileri,et al.  Experimental investigation of the effect of antioxidant additives on NOx emissions of a diesel engine using biodiesel , 2014 .

[23]  Kenneth Holmberg,et al.  Global energy consumption due to friction in trucks and buses , 2014 .

[24]  Adam B. Dempsey,et al.  The Contribution of Lubricant to the Formation of Particulate Matter with Reactivity Controlled Compression Ignition in Light-Duty Diesel Engines , 2014, Emission Control Science and Technology.

[25]  Muhammad Imran,et al.  Corn cob modified by lauric acid and ethanediol for emulsified oil adsorption , 2015 .

[26]  Avinash Kumar Agarwal,et al.  Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics , 2015 .

[27]  Haji Hassan Masjuki,et al.  Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction , 2015 .

[28]  Yuesen Wang,et al.  Comparative Study on Particles Formation in a Diesel Engine When Lubricating Oil Involved in Fuel Combustion , 2015 .

[29]  S. Murugan,et al.  Effect of tyre derived oil-diesel blend on the combustion and emissions characteristics in a compression ignition engine with internal jet piston geometry , 2016 .

[30]  N. Saravanan,et al.  Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on fish oil biodiesel , 2016 .

[31]  S. Corrêa,et al.  Polycyclic aromatic hydrocarbons in diesel emission, diesel fuel and lubricant oil , 2016 .

[32]  Charles Mbohwa,et al.  Mitigating Environmental Impact of Petroleum Lubricants , 2016 .

[33]  M. Musthafa.  Synthetic lubrication oil influences on performance and emission characteristic of coated diesel engine fuelled by biodiesel blends , 2016 .

[34]  R. D. Misra,et al.  Effect of infiltration of bio-lubricant on the performance of a compression ignition engine fuelled with biodiesel blends , 2017, Clean Technologies and Environmental Policy.

[35]  J. Y. Wira,et al.  Performance, emissions and lubricant oil analysis of diesel engine running on emulsion fuel , 2016 .

[36]  Juozas Padgurskas,et al.  Tribological effects of Cu, Fe and Zn nano‐particles, suspended in mineral and bio‐based oils , 2016 .

[37]  Bernardo Tormos,et al.  Fuel consumption and friction benefits of low viscosity engine oils for heavy duty applications , 2017 .

[38]  R. Peralta,et al.  Liquid nitrogen pretreatment of eucalyptus sawdust and rice hull for enhanced enzymatic saccharification. , 2017, Bioresource technology.

[39]  Chun-liang Chen,et al.  Study on combination of in-situ dispersion and secondary ball milling for W-Ni-Co tungsten heavy alloy , 2018 .

[40]  Kihyung Lee,et al.  Investigation on Spray Behavior and NOx Conversion Characteristic of a Secondary Injector for a Lean NOx Trap Catalyst , 2018 .

[41]  Hongjun Mao,et al.  Combustion process and NOx emissions of a marine auxiliary diesel engine fuelled with waste cooking oil biodiesel blends , 2018 .

[42]  S. Prabu,et al.  Performance, combustion and emission characteristics of diesel engine fuelled with papaya and watermelon seed oil bio-diesel/diesel blends , 2018 .