PIV Measurements of Flow in Recirculation Cavities at the Inlet of a Centrifugal Compressor

,Because of the necessity of mass flow range as large as possible on turbocharger compressors to match different engine regimes, the surge and stall phenomena, that limit the operational range at low mass flow, need to be controlled. Numerous active and passive devices exist in order to reduce or suppress their occurrence. A method that has been proven to work and is commonly used consists of recirculation passages that extract high entropy flow from the tip of the blades to reduce blockage in the blades. The compressor used in the study features a ported shroud connected by a slot to the main passage that removes part of the flow near the inducer and mixes it upstream into the inlet. In order to understand the mechanism and assess the flow patterns in the recirculation channels, PIV measurements were carried out in the inlet region. Data was collected along a compressor speedline and allows understanding of the flow in the channels and its interaction with the incoming flow for different operating regimes of the compressor.

[1]  Jan Tommy Gravdahl,et al.  Compressor surge control using a close-coupled valve and backstepping , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[2]  Thomas Secall Wimmel,et al.  Unsteady Flow in a Turbocharger Centrifugal Compressor: Three-Dimensional Computational Fluid Dynamics Simulation and Numerical and Experimental Analysis of Impeller Blade Vibration , 2006 .

[3]  K. Hansen,et al.  Experimental and Theoretical Study of Surge in a Small Centrifugal Compressor , 1981 .

[4]  Charles A. Amann,et al.  Casing Modification for Increasing the Surge Margin of a Centrifugal Compressor in an Automotive Turbine Engine , 1975 .

[5]  Melanie Voges,et al.  Application of particle image velocimetry to a transonic centrifugal compressor , 2007 .

[6]  Mark P. Wernet,et al.  A flow field investigation in the diffuser of a high-speed centrifugal compressor using digital particle imaging velocimetry , 2000 .

[7]  G. Price,et al.  Pressure Oscillations Occurring in a Centrifugal Compressor System With and Without Passive and Active Surge Control , 1994 .

[8]  X-C Zhu,et al.  Numerical simulations of stall inside a centrifugal compressor , 2007 .

[9]  M. Abramian,et al.  EXPERIMENTAL INVESTIGATION OF THE STEADY AND UNSTEADY RELATIVE FLOW IN A MODEL CENTRIFUGAL IMPELLER PASSAGE , 1994 .

[10]  Alan H. Epstein,et al.  Dynamic Control of Centrifugal Compressor Surge Using Tailored Structures , 1991 .

[11]  N. Aretakis,et al.  Turbocharger Unstable Operation Diagnosis Using Vibroacoustic Measurements , 2004 .

[12]  Edward M. Greitzer,et al.  Surge Dynamics in a Free-Spool Centrifugal Compressor System , 1992 .

[13]  E. Greitzer.  The Stability of Pumping Systems—The 1980 Freeman Scholar Lecture , 1981 .

[14]  G. Bartolini,et al.  Compressor surge active control via throttle and CCV actuators. A second-order sliding-mode approach , 2008, 2008 International Workshop on Variable Structure Systems.

[15]  Marc Hoit,et al.  Structures Congress 2008 , 2008 .

[16]  Ephraim Gutmark,et al.  Dynamic Characterization of a Centrifugal Compressor with Ported Shroud , 2011 .

[17]  Fredrik Lindström,et al.  Surge Definitions for Radial Compressors in Automotive Turbochargers , 2008 .

[18]  Alan H. Epstein,et al.  Active Stabilization of Centrifugal Compressor Surge , 1990 .