Response Surface Metamodel-based Performance Reliability for Reinforced Concrete Beams Strengthened with FRP sheets

Order of Elements First page: The first page of the manuscript is reserved for the title, author name(s), synopsis, and keywords. Please center the paper title and authors’ names at the top of the page. Leave three lines blank, print the word “Synopsis” followed by a colon at the left margin, and then key in the synopsis.

[1]  R. J. Quantrill,et al.  Experimental and analytical investigation of FRP strengthened beam response: Part I , 1996 .

[2]  Thanasis Triantafillou,et al.  Strengthening of RC beams with epoxy-bonded fibre-composite materials , 1992 .

[3]  Eunsoo Choi,et al.  Seismic analysis and retrofit of mid-America bridges , 2002 .

[4]  Hee Kiat Cheong,et al.  Brittle Failure and Bond Development Length of CFRP-Concrete Beams , 2001 .

[5]  H. Saadatmanesh,et al.  RC Beams Strengthened with GFRP Plates. I: Experimental Study , 1991 .

[6]  Scott T Smith,et al.  FRP-strengthened RC beams. II: assessment of debonding strength models , 2002 .

[7]  Oliver Kelly,et al.  Ultimate Response of RC Beams Strengthened with CFRP Plates , 2001 .

[8]  Leonardo Dueñas-Osorio,et al.  Surrogate modeling and failure surface visualization for efficient seismic vulnerability assessment of highway bridges , 2013 .

[9]  Maria Rota,et al.  Processing Italian damage data to derive typological fragility curves , 2008 .

[10]  Nabil F. Grace,et al.  Strengthening of Concrete Beams Using Innovative Ductile Fiber-Reinforced Polymer Fabric , 2002 .

[11]  Michael E. Kreger,et al.  INCREASING FLEXURAL CAPACITY OF REINFORCED CONCRETE BEAMS USING CARBON FIBER-REINFORCED POLYMER COMPOSITES , 2003 .

[12]  Scott T Smith,et al.  Intermediate crack-induced debonding in RC beams and slabs , 2003 .

[13]  Philip A. Ritchie,et al.  External Reinforcement of Concrete Beams Using Fiber Reinforced Plastics , 1991 .

[14]  K. Harries,et al.  Statistical Characterization of Reinforced Concrete Beams Strengthened with FRP Sheets , 2013 .

[15]  Barry J. Goodno,et al.  Metamodel-based regional vulnerability estimate of irregular steel moment-frame structures subjected to earthquake events , 2012 .

[16]  R. N. Swamy,et al.  STRUCTURAL BEHAVIOR OF COMPOSITE RC BEAMS WITH EXTERNALLY BONDED CFRP , 1998 .

[17]  A. Fam,et al.  Flexural Strengthening of RC Beams Using Steel Reinforced Polymer (SRP) Composites , 2005, SP-230: 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures.

[18]  J. W. Tedesco,et al.  Strengthening of Reinforced Concrete Beams with Externally Bonded Composite Laminates , 1999 .

[19]  Andrew S. Whittaker,et al.  Fragility functions for low aspect ratio reinforced concrete walls , 2010 .

[20]  Junwon Seo,et al.  Probabilistic Vulnerability Scenarios for Horizontally Curved Steel I-Girder Bridges under Earthquake Loads , 2010 .

[21]  A. M. Prasad,et al.  Development of fragility curves using high‐dimensional model representation , 2013 .

[22]  Benjamin Zachary Reeve.  Effect of Adhesive Stiffness and CFRP Geometry on the Behavior of Externally Bonded CFRP Retrofit Measures Subject to Monotonic Loads , 2006 .

[23]  L. Bank.  Composites for Construction: Structural Design with FRP Materials , 2006 .

[24]  O. Ahmed.  Strengthening of R.C. beams by means of externally bonded CFRP laminates. Improved model for plate-end shear , 2000 .

[25]  A. Machida,et al.  Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review , 2002 .

[26]  A. Nanni,et al.  Performance of One-Way Reinforced Concrete Slabs with Externally Bonded Fiber-Reinforced Polymer Strengthening , 2004 .

[27]  Marie-Anne Erki,et al.  Response of RC Beams Strengthened with CFRP Laminates and Subjected to a High Rate of Loading , 2001 .

[28]  Junwon Seo,et al.  Horizontally curved steel bridge seismic vulnerability assessment , 2012 .

[29]  Chadon Lee,et al.  FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER-REINFORCED POLYMER LAMINATES AT DIFFERENT LEVELS OF SUSTAINING LOAD , 2003 .

[30]  A. Hutchinson,et al.  CONCRETE BEAMS STRENGTHENED WITH EXTERNALLY BONDED FRP PLATES , 2001 .

[31]  M. Petrou,et al.  Full-Scale Experimental Investigation of Repair of Reinforced Concrete Interstate Bridge Using CFRP Materials , 2006 .

[32]  R. J. Quantrill,et al.  An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams , 1998 .

[33]  Antonio Nanni,et al.  CONCRETE COVER DELAMINATION IN REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER REINFORCED POLYMER SHEETS , 1999 .

[34]  M. Petrou,et al.  Comparison of Three Flexural Retrofit Systems under Monotonic and Fatigue Loads , 2005 .

[35]  L. Hollaway,et al.  An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams , 1998 .

[36]  L C Hollaway,et al.  A PRELIMINARY EVALUATION OF CARBON FIBRE REINFORCED POLYMER PLATES FOR STRENGTHENING REINFORCED CONCRETE MEMBERS. , 1997 .

[37]  Gholamreza Nouri,et al.  Developing of Fragility Curve for Two-Span Simply Supported Concrete Bridge in Near-Fault Area , 2011 .

[38]  G. J. Al-Sulaimani,et al.  Strengthening of Initially Loaded Reinforced Concrete Beams Using FRP Plates , 1994 .

[39]  Luc Taerwe,et al.  Structural behaviour and design of concrete members strengthened with externally bonded FRP reinforcement , 2001 .

[40]  Scott T. Smith,et al.  Interfacial stresses in plated beams , 2001 .