Concepts for morphing airfoil sections using bi-stable laminated composite structures

The present paper investigates the potential of using bi-stable laminated composite structures for morphing an airfoil section. The objective of the paper is to identify geometries and lay-ups of candidate configurations that offer multiple stable shapes for the airfoil section. Carbon-fiber laminated composites with non-symmetric laminate configurations are used for morphing the airfoil section. Thermal curing is used to induce residual stresses into the structure in order to achieve bi-stability. Three concepts that focus on morphing a flap-like structure and the camber and chord of an airfoil section are proposed. Several geometries and laminate configurations are investigated using finite element nonlinear static analysis. The magnitude of loads required to actuate the airfoil section between the stable shapes is evaluated. The impact of manufacturability on producing viable morphing mechanisms within the airfoil section is also discussed.

[1]  Paul M. Weaver,et al.  Phenomena in the bifurcation of unsymmetric composite plates , 2007 .

[2]  Zhengneng Li,et al.  Cured Shape of Cross-Ply Composite Thin Shells , 2003 .

[3]  Keith A. Seffen,et al.  Bi-stable concepts for reconfigurable structures , 2004 .

[4]  Michael W. Hyer,et al.  Thermally-induced deformation behavior of unsymmetric laminates , 1998 .

[5]  Sergio Pellegrino,et al.  A NOVEL ACTUATED COMPOSITE TAPE-SPRING FOR DEPLOYABLE STRUCTURES , 2004 .

[6]  Werner Hufenbach,et al.  Analysis and optimisation of multistable composites under residual stresses , 2002 .

[7]  Ajit D. Kelkar,et al.  [american institute of aeronautics and astronautics 45th aiaa/asme/asce/ahs/asc structures, structural dynamics & materials conference - palm springs, california ()] 45th aiaa/asme/asce/ahs/asc structures, structural dynamics materials conference - comparative study of woven-roving and stitch-bonded , 2004 .

[8]  Michael R Wisnom,et al.  Loss of bifurcation and multiple shapes of thin [0/90] unsymmetric composite plates subject to thermal stress , 2004 .

[9]  Michael W. Hyer,et al.  SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates , 2003 .

[10]  Kevin D Potter,et al.  Modelling and Applications of Thermally Induced Multistable Composites with Piecewise Variation of Lay-up in the Planform , 2007 .

[11]  I. H. Abbott,et al.  Theory of Wing Sections , 1959 .

[12]  Michael W. Hyer,et al.  A Morphing Concept Based on Unsymmetric Composite Laminates and Piezoceramic MFC Actuators , 2004 .

[13]  Lothar Kroll,et al.  Design of multistable composites for application in adaptive structures , 2002 .

[14]  Paul M. Weaver,et al.  Analysis of morphing, multi stable structures actuated by piezoelectric patches , 2008 .

[15]  Sergio Pellegrino,et al.  Bistable prestressed shell structures , 2004 .

[16]  Kais Atallah,et al.  Comparison of electrical drive technologies for aircraft flight control surface actuation , 1999, IEMDC 1999.

[17]  Paul M. Weaver,et al.  A concept for the generation of out-of-plane distortion from tailored FRP laminates , 2004 .

[18]  Keith A. Seffen,et al.  Folding and deployment of curved tape springs , 2000 .

[19]  Robert Taylor,et al.  Development of Elastic Memory Composite Stiffeners for a Flexible Precision Reflector , 2006 .

[20]  Michael W. Hyer,et al.  Calculations of the Room-Temperature Shapes of Unsymmetric Laminatestwo , 1981 .

[21]  Philip N. Keller,et al.  Neutrally Stable Composite Tape Springs , 2006 .

[22]  Maenghyo Cho,et al.  A Study on the Room-Temperature Curvature Shapes of Unsymmetric Laminates Including Slippage Effects , 1998 .

[23]  Michael W. Hyer,et al.  Snap-through of unsymmetric fiber-reinforced composite laminates , 2002 .

[24]  Michael R Wisnom,et al.  Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates , 2003 .

[25]  Karl Schulte,et al.  Advanced Calculation of the Room-Temperature Shapes of Unsymmetric Laminates , 1999 .