Development and application of tool wear: A review of the characterization of TiC-based cermets with different binders

[1]  Myeongjin Kim,et al.  Fabrication of surface-treated SiC/epoxy composites through a wetting method for enhanced thermal and mechanical properties , 2014 .

[2]  Xizhi Fan,et al.  Self-propagating high-temperature synthesis of TiC–TiB2-based Co cermets from a Co–Ti–B4C system and fabrication of coatings using the cermet powders , 2013 .

[3]  Kun Chen,et al.  Preparation and Adsorbability for Orange II of CTAB Modified Bentonite , 2013 .

[4]  J. M. Córdoba,et al.  Spark plasma sintering of TixTa1-xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties , 2013 .

[5]  Jun Hu,et al.  Efficient removal of cobalt from aqueous solution using β-cyclodextrin modified graphene oxide , 2013 .

[6]  Yu-Chi Lin,et al.  Reinforcements affect mechanical properties and wear behaviors of WC clad layer by gas tungsten arc welding , 2013 .

[7]  F. Qiu,et al.  Effect of W content on the compression properties and abrasive wear behavior of the (TiB2–TiCxNy)/(Ni + W) composites , 2013 .

[8]  Lei Cheng,et al.  Inorganic binder-containing composite cathode contact materials for solid oxide fuel cells , 2013 .

[9]  S. Tsipas,et al.  Influence of carbon content on the sinterability of an FeCr matrix cermet reinforced with TiCN , 2013 .

[10]  N. Wang,et al.  Influence of Mo Content on the Properties of TiC-Based Cermets , 2012 .

[11]  D. B. Goel,et al.  A Comparative Study of Cavitation Erosive Behaviour of 23/8N Nitronic Steel and 13/4 Martensitic Stainless Steel , 2012 .

[12]  Y. Tür,et al.  The effect of 3 mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets , 2012 .

[13]  M. Abdellaoui,et al.  Fabrication, microstructure and mechanical properties of novel bulk binderless (Ti0.8Zr0.2)C carbides prepared by mechanical alloying and spark plasma sintering , 2012 .

[14]  Meijun Yang,et al.  Effect of Mo2C on erosion–corrosion resistance behavior of Ti(C, N)-based cermets , 2012 .

[15]  J. Lewandowski,et al.  Toughness, extrinsic effects and Poisson’s ratio of bulk metallic glasses , 2012 .

[16]  You-wen Yang,et al.  Numerical analysis of the stress–strain distributions in the particle reinforced metal matrix composite SiC/6064Al , 2012 .

[17]  J. M. Córdoba,et al.  Development of multicomponent–multiphase materials based on (Ti,Ta,Nb)CxN1−x carbonitride solid solutions , 2012 .

[18]  Liping Huang,et al.  Microstructure and Tribological Property of TiC-Mo Composite Coating Prepared by Vacuum Plasma Spraying , 2012, Journal of Thermal Spray Technology.

[19]  Riaz Muhammad,et al.  Turning of Advanced Alloys with Vibrating Cutting Tool , 2012 .

[20]  S. Chakraborty,et al.  Cutting tool material selection using grey complex proportional assessment method , 2012 .

[21]  Yuzhu Huang,et al.  Microstructure and mechanical properties of (Ti,W,Ta)C-xMo-Ni cermets , 2012 .

[22]  Yong Shi,et al.  Self-Propagating High-Temperature Synthesis of TiB2-Ti(C, N) Cermets Composite Powder , 2012 .

[23]  Y. H. He,et al.  Effect of Mo and Co additions on the microstructure and properties of WC-TiC-Ni cemented carbides , 2012 .

[24]  P. Abachi,et al.  Effect of cobalt replacement by nickel on functionally graded cemented carbonitrides , 2012 .

[25]  K. Hu,et al.  Milling performance of TiC–Ni cermet tools toughened by TiN nanoparticles , 2012 .

[26]  Yangshan Sun,et al.  Effect of Mo addition on the microstructure and wear resistance of in situ TiC/Al composite , 2011 .

[27]  M. Viljus,et al.  Three-body abrasive wear of cermets , 2011 .

[28]  L. Lim,et al.  Thermodynamics of TiC- and Ti(C,N)-based cermet processing prior to liquid phase sintering stage , 2011 .

[29]  M. Salehi,et al.  Effect of post-oxidizing temperature on tribological and corrosion behavior of plasma nitrided austenitic stainless steel , 2011 .

[30]  O. Solcova,et al.  Preparation of Al–SBA-15 pellets with low amount of additives: Effect of binder content on texture and mechanical properties. Application to Friedel–Crafts alkylation , 2011 .

[31]  S. Ramanathan,et al.  Gel-combustion, characterization and processing of porous Ni–YSZ cermet for anodes of solid oxide fuel cells (SOFCs) , 2011 .

[32]  Z. Liu,et al.  Effect of Molybdenum on the Microstructure and Mechanical Properties of TiC/Ni Cermet Cladding Layers , 2010 .

[33]  Jun Li,et al.  Characterization of oxide scales to evaluate high temperature oxidation behavior of Ti(C,N)-based cermets in static air , 2010 .

[34]  O. Kaidash.  Special features of structural transformations in sintering a nanodispersed monophase powder of titanium nitride produced by plasmachemical synthesis , 2010 .

[35]  Yong Zheng,et al.  Effect of TaC addition on the microstructures and mechanical properties of Ti(C, N)-based cermets , 2010 .

[36]  Q. Jiang,et al.  Effect of nickel addition on the exothermic reaction of the Ti-C-BN system , 2010 .

[37]  Shaojian Lin,et al.  Effect of WC content on the microstructure and mechanical properties of Ti(C0.5N0.5)–WC–Mo–Ni cermets , 2010 .

[38]  S. Kim,et al.  Friction Instability Induced by Corrosion of Gray Iron Brake Discs , 2010 .

[39]  A. R. Daud,et al.  Dry sliding wear behaviour of Al–12Si–4Mg alloy with cerium addition , 2010 .

[40]  M. Viljus,et al.  Three-body abrasive wear of TiC–NiMo cermets , 2010 .

[41]  T. Goto,et al.  Spark plasma sintering of TiN-cubic BN composites , 2010 .

[42]  G. Madhusudhan Reddy,et al.  Friction surfacing of titanium alloy with aluminium metal matrix composite , 2011 .

[43]  Minghai Chen,et al.  Wettability and Bonding between Ni and Ti(C, N) with Multiple Carbide Additions , 2009 .

[44]  Jun Wang,et al.  Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets , 2009 .

[45]  G. Fantozzi,et al.  Microstructure and mechanical properties of TiC–TiN based cermets for tools application , 2009 .

[46]  C. Yeh,et al.  Formation of TiB2-Al2O3 and NbB2-Al2O3 composites by combustion synthesis involving thermite reactions , 2009 .

[47]  Xiaobo Zhang,et al.  Microstructure and mechanical properties of TiC–TiN–Zr–WC–Ni–Co cermets , 2009 .

[48]  M. Kong,et al.  Fabrication and properties of TiC-based cermet with intra/intergranular microstructure , 2009 .

[49]  K. Woo,et al.  Sintering behavior and mechanical properties of WC-10Co, WC-10Ni and WC-10Fe hard materials produced by high-frequency induction heated sintering , 2009 .

[50]  Haijun Yu,et al.  Synthesis of nanocrystalline Ti(C,N) powders by mechanical alloying and influence of alloying elements on the reaction , 2009 .

[51]  Wei Zhao,et al.  Microstructure and Properties of the Cermets Based on Ti(C,N) , 2009 .

[52]  Xiaobo Zhang,et al.  Microstructure, mechanical properties and thermal shock resistance of nano-TiN modified TiC-based cermets with different binders , 2008 .

[53]  Z. Guo,et al.  Study of TiC/Ni3Al composites by laser ignited self-propagating high-temperature synthesis (LISHS) , 2008 .

[54]  M. Z. Omar,et al.  A comparative study of mechanically mixed layers (MMLs) characteristics of commercial aluminium alloys sliding against alumina and steel sliders , 2008 .

[55]  Xiaobo Zhang,et al.  Effect of Mo addition on the microstructure and mechanical properties of ultra-fine grade TiC–TiN–WC–Mo2C–Co cermets , 2008 .

[56]  B. Basu,et al.  Crater wear mechanisms of TiCN–Ni–WC cermets during dry machining , 2007 .

[57]  Yuehui He,et al.  Influence of preparation process on sintering behavior and mechanical properties of ultrafine grained Ti(C, N)-based cermets , 2007 .

[58]  M. Zawrah.  Synthesis and characterization of WC-Co nanocomposites by novel chemical method , 2007 .

[59]  N. Liu,et al.  Effect of TiC/TiN powder size on microstructure and properties of Ti(C, N)-based cermets , 2007 .

[60]  Wei Gong,et al.  Microstructure and wear-resistance of Fe–(Ti,V)C composite , 2007 .

[61]  Min You,et al.  Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering , 2005 .

[62]  J. Russias,et al.  Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets , 2005 .

[63]  Ning Liu,et al.  The milling performances of TiC-based cermet tools with TiN nanopowders addition against normalized medium carbon steel AISI1045 , 2005 .

[64]  Q. Jiang,et al.  Reactive infiltration synthesis of TiB2–TiC particulates reinforced steel matrix composites , 2005 .

[65]  Ersan Aslan,et al.  Experimental investigation of cutting tool performance in high speed cutting of hardened X210 Cr12 cold-work tool steel (62 HRC) , 2005 .

[66]  Yong Zheng,et al.  Effect of nano addition on the microstructures and mechanical properties of Ti(C, N)-based cermets , 2005 .

[67]  Yudong Xu,et al.  Microstructures and mechanical properties of nanoTiN modified TiC-based cermets for the milling tools , 2004 .

[68]  Xinghong Zhang,et al.  Effect of Fe on the phases and microstructure of TiC–Fe cermets by combustion synthesis/quasi-isostatic pressing , 2004 .

[69]  Jong-ku Park,et al.  Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti, Mo)C-Ni cermet without core-rim structure , 2004 .

[70]  R. Sepúlveda,et al.  Friction and tribological behavior of (Ti, V)C-Co cermets , 2003 .

[71]  R. Wadsack,et al.  Structural refinement of chromium by severe plastic deformation , 2003 .

[72]  I. Hussainova.  Effect of microstructure on the erosive wear of titanium carbide-based cermets , 2003 .

[73]  Lide Zhang,et al.  Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification , 2003 .

[74]  O. Graeve,et al.  The effect of an electric field on the microstructural development during combustion synthesis of TiNi–TiC composites , 2002 .

[75]  M. Barati,et al.  Production of (W, Ti)C reinforced Ni–Ti matrix composites , 2002 .

[76]  Yasunori Harada,et al.  Deformation behaviour of chromium sheets in mechanical and laser bending , 2002 .

[77]  Gopal S. Upadhyaya,et al.  Materials science of cemented carbides — an overview , 2001 .

[78]  Jin-Yong Lee,et al.  Corrosion and wear properties of TiC/Ni–Mo composites produced by direct consolidation during a self-propagating high-temperature reaction , 2001 .

[79]  L. Lim,et al.  On the disappearance of Mo2C during low-temperature sintering of Ti(C,N)-Mo2C-Ni cermets , 1999 .

[80]  T. Fischer,et al.  Microstructure, hardness and toughness of nanostructured and conventional WC-Co composites , 1998 .

[81]  I. Wright,et al.  Indentation fracture of WC-Co cermets , 1985 .