Streamline stiffener path optimization (SSPO) for embedded stiffener layout design of non-uniform curved grid-stiffened composite (NCGC) structures

Abstract A bio-inspired concept of non-uniform curved grid-stiffened composite structures with embedded stiffeners (embedded NCGCs) is proposed in the paper. Shallow curved stiffeners are embedded in the laminate skin to form an integrated structure to improve the skin–stiffener deformation compatibility. A method named streamline stiffener path optimization (SSPO) based on multiscale modeling is proposed for curved stiffener layout design of embedded NCGCs. Firstly, the homogenization-based global/local analysis is used to calculate structural responses on a global unstiffened model with the equivalent material properties obtained from local representative cell configurations (RCCs). Secondly, the discrete distribution of 2D curved stiffener paths is transformed into a continuous distribution of the streamline function values (SFVs) on a 3D level set surface. The stiffener path description using the streamline function is similar as the level set method with specific constraints. Projections of points with the same integral SFVs will form one stiffener path. Thirdly, optimal curved stiffener layout is achieved using shape design of local parallelogram representative cell configurations with analytical sensitivities calculated using the affine mapping from the square master domain to the parallelogram RCCs. Fourthly, stiffener spacing and angle constraints are added for manufacturing considerations and local buckling resistance, and optimization design is implemented to maximize the buckling load within a given weight. Finally, numerical examples of a square laminated panel under uniaxial and biaxial compressions validate the effectiveness of the proposed SSPO method and indicate the significant improvement of the buckling loads by steering the stiffener paths.

[1]  Peng Hao,et al.  Multilevel Optimization Framework for Hierarchical Stiffened Shells Accelerated by Adaptive Equivalent Strategy , 2017, Applied Composite Materials.

[2]  P. Breitkopf,et al.  Concurrent topology optimization design of material and structure within FE2 nonlinear multiscale analysis framework , 2014 .

[3]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[4]  Wanxin Li,et al.  Fabrication and mechanical behaviors of corrugated lattice truss composite sandwich panels , 2016 .

[5]  Weihong Zhang,et al.  Stress constrained shape and topology optimization with fixed mesh: A B-spline finite cell method combined with level set function , 2014 .

[6]  Pierre Duysinx,et al.  Simultaneous design of structural layout and discrete fiber orientation using bi-value coding parameterization and volume constraint , 2013 .

[7]  Dixiong Yang,et al.  Isogeometric buckling analysis of composite variable-stiffness panels , 2017 .

[8]  Weihong Zhang,et al.  Integrated optimization of actuators and structural topology of piezoelectric composite structures for static shape control , 2018, Computer Methods in Applied Mechanics and Engineering.

[9]  L. Van Miegroet,et al.  Stress concentration minimization of 2D filets using X-FEM and level set description , 2007 .

[10]  Bo Wang,et al.  Efficient Optimization of Cylindrical Stiffened Shells with Reinforced Cutouts by Curvilinear Stiffeners , 2016 .

[11]  P. Breitkopf,et al.  Multiscale structural topology optimization with an approximate constitutive model for local material microstructure , 2015 .

[12]  John Rasmussen,et al.  Combined shape and reinforcement layout optimization of shell structures , 2004 .

[13]  Weihong Zhang,et al.  Sensitivity analysis for optimization design of non-uniform curved grid-stiffened composite (NCGC) structures , 2018, Composite Structures.

[14]  Kaare Brandt Petersen,et al.  The Matrix Cookbook , 2006 .

[15]  Kai-Uwe Schröder,et al.  Sizing strategy for stringer and orthogrid stiffened shells under axial compression , 2017 .

[16]  Maurizio Paschero,et al.  Improvement of Axial Buckling Capacity of Elliptical Lattice Cylinders , 2010 .

[17]  Weihong Zhang,et al.  Concurrent topology optimization design of structures and non-uniform parameterized lattice microstructures , 2018, Structural and Multidisciplinary Optimization.

[18]  Piotr Breitkopf,et al.  Recent Advances on Topology Optimization of Multiscale Nonlinear Structures , 2017 .

[19]  Weihong Zhang,et al.  Simultaneous design of components layout and supporting structures using coupled shape and topology optimization technique , 2008 .

[20]  Rakesh K. Kapania,et al.  Grid-Stiffened Panel Optimization Using Curvilinear Stiffeners , 2011 .

[21]  Z. Gürdal,et al.  In-plane response of laminates with spatially varying fiber orientations - Variable stiffness concept , 1993 .

[22]  Justin Dirrenberger,et al.  Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization , 2017 .

[23]  Yu Sun,et al.  Hybrid analysis and optimization of hierarchical stiffened plates based on asymptotic homogenization method , 2015 .

[24]  Stefanie Feih,et al.  Bio-inspired hierarchical design of composite T-joints with improved structural properties , 2015 .

[25]  George Keith Batchelor,et al.  An Introduction to Fluid Dynamics. , 1969 .

[26]  H. Gea,et al.  A systematic topology optimization approach for optimal stiffener design , 1998 .

[27]  N. Gascons,et al.  Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior , 2014 .

[28]  Daining Fang,et al.  Fabrication and testing of composite orthogrid sandwich cylinder , 2017 .

[29]  Damodar R. Ambur,et al.  Optimal design of general stiffened composite circular cylinders for global buckling with strength constraints , 1998 .

[30]  T. Shi,et al.  A level set solution to the stress-based structural shape and topology optimization , 2012 .

[31]  D. Peeters,et al.  Stacking sequence optimisation of variable stiffness laminates with manufacturing constraints , 2015 .

[32]  Christos Kassapoglou,et al.  Optimal Design and Damage Tolerance Verification of an Isogrid Structure for Helicopter Application , 2003 .

[33]  Lei Zhang,et al.  Design of graded lattice structure with optimized mesostructures for additive manufacturing , 2018 .

[34]  Krister Svanberg,et al.  A Class of Globally Convergent Optimization Methods Based on Conservative Convex Separable Approximations , 2002, SIAM J. Optim..

[35]  Min Xiong,et al.  Optimal stiffener layout of plate/shell structures by bionic growth method , 2014 .

[36]  Philippe Le Grognec,et al.  Buckling analysis of a reinforced sandwich column using the Bloch wave theory , 2017 .

[37]  Gui-Rong Liu,et al.  The Finite Element Method , 2007 .

[38]  Zhen-Pei Wang,et al.  Optimal form and size characterization of planar isotropic petal-shaped auxetics with tunable effective properties using IGA , 2018, Composite Structures.

[39]  O. Sigmund.  Tailoring materials with prescribed elastic properties , 1995 .

[40]  Jihong Zhu,et al.  A review on the design of laminated composite structures: constant and variable stiffness design and topology optimization , 2018, Advanced Composites and Hybrid Materials.

[41]  Rui Hu,et al.  H-DGTP—a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures , 2015 .

[42]  Kenjiro Terada,et al.  Two‐scale topology optimization for composite plates with in‐plane periodicity , 2018 .

[43]  R. Haftka,et al.  Review of options for structural design sensitivity analysis. Part 1: Linear systems , 2005 .

[44]  Koetsu Yamazaki,et al.  Stiffener layout design for plate structures by growing and branching tree model (application to vibration-proof design) , 2004 .

[45]  Weihong Zhang,et al.  Buckling optimization design of curved stiffeners for grid-stiffened composite structures , 2017 .

[46]  Christos Kassapoglou,et al.  Design, analysis, fabrication, and testing of composite grid-stiffened panels for aircraft structures , 2017 .

[47]  James H. Starnes,et al.  Structural Response of Compression-Loaded, Tow-Placed, Variable Stiffness Panels , 2002 .

[48]  Michael Yu Wang,et al.  The stiffness spreading method for layout optimization of truss structures , 2014 .

[49]  Xiaojie Yuan,et al.  Buckling optimization of variable-stiffness composite panels based on flow field function , 2017 .

[50]  Sergio R. Turteltaub,et al.  Normalization approaches for the descent search direction in isogeometric shape optimization , 2017, Comput. Aided Des..

[51]  Rakesh K. Kapania,et al.  Design, Optimization, and Evaluation of Integrally Stiffened Al-7050 Panel with Curved Stiffeners , 2011 .

[52]  Rakesh K. Kapania,et al.  Buckling analysis of unitized curvilinearly stiffened composite panels , 2016 .

[53]  Dan Wang,et al.  Global and local buckling analysis of grid-stiffened composite panels , 2015 .

[54]  Zhen-Pei Wang,et al.  Isogeometric shape optimization for quasi‐static processes , 2015 .

[55]  Xiaoping Qian,et al.  Full analytical sensitivities in NURBS based isogeometric shape optimization , 2010 .