A Numerical Study on the Influence of Hole Depth on the Static and Dynamic Performance of Hole-Pattern Seals

[1]  C. C. Nelson.  Analysis for leakage and rotordynamic coefficients of surface-roughened tapered annular gas seals , 1984 .

[2]  Stephen Phillips,et al.  Friction Factor Behavior From Flat-Plate Tests of Smooth and Hole-Pattern Roughened Surfaces With Supply Pressures up to 84 bars , 2011 .

[3]  Harald Underbakke,et al.  Hole-Pattern and Honeycomb Seal Rotordynamic Forces: Validation of CFD-Based Prediction Techniques , 2012 .

[4]  Luis San Andrés,et al.  A Bulk Flow Model for Off-Centered Honeycomb Gas Seals , 2007 .

[5]  Paul E. Allaire,et al.  A Computational Fluid Dynamics/Bulk-Flow Hybrid Method for Determining Rotordynamic Coefficients of Annular Gas Seals , 2012 .

[6]  G. G. Hirs.  A Bulk-Flow Theory for Turbulence in Lubricant Films , 1973 .

[7]  Dara W. Childs,et al.  Theory Versus Experiment for the Rotordynamic Impedances of Two Hole-Pattern-Stator Gas Annular Seals , 2002 .

[8]  D. Childs,et al.  The Impact of Real Gas Properties on Predictions of Static and Rotordynamic Properties of the Annular Gas Seals for Injection Compressors , 2008 .

[9]  Gerald L. Morrison,et al.  Friction-Factor Characteristics for Narrow Channels With Honeycomb Surfaces , 1992 .

[10]  Wei Shyy,et al.  Computational modeling for honeycomb-stator gas annular seal , 2002 .

[11]  Dara W. Childs,et al.  Friction-Factor Data for Flat-Plate Tests of Smooth and Honeycomb Surfaces , 1992 .

[12]  Dara W. Childs,et al.  Annular Honeycomb-Stator Turbulent Gas Seal Analysis Using a New Friction-Factor Model Based on Flat Plate Tests , 1994 .

[13]  Dara W. Childs,et al.  Static and Rotordynamic Characteristics for a New Hole-Pattern Annular Gas Seal Design Incorporating Larger Diameter Holes , 2014 .

[14]  Cheng Liu,et al.  Hole-Pattern Seals Performance Optimization Using Computational Fluid Dynamics and Design of Experiment Techniques , 2013 .

[15]  Alexandrina Untaroiu,et al.  Hybrid Analysis of Gas Annular Seals With Energy Equation , 2014 .

[16]  C. C. Nelson.  Rotordynamic coefficients for compressible flow in tapered annular seals , 1985 .

[17]  Zhenping Feng,et al.  Investigations on the Rotordynamic Characteristics of a Hole-Pattern Seal Using Transient CFD and Periodic Circular Orbit Model , 2011 .

[18]  Dara W. Childs,et al.  An annular gas seal analysis using empirical entrance and exit region friction factors , 1990 .

[19]  Thomas Soulas,et al.  Numerical Modeling of Rotordynamic Coefficients for Deliberately Roughened Stator Gas Annular Seals , 2006 .

[20]  Dara W. Childs,et al.  The Acoustic Influence of Cell Depth on the Rotordynamic Characteristics of Smooth-Rotor/Honeycomb-Stator Annular Gas Seals , 1996 .

[21]  Hugh W. Coleman,et al.  A New Friction Factor Model and Entrance Loss Coefficient for Honeycomb Annular Gas Seals , 2000 .

[22]  Dara W. Childs,et al.  Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis , 1993 .

[23]  Dara W. Childs,et al.  The Impact of Hole Depth on the Rotordynamic and Leakage Characteristics of Hole-Pattern-Stator Gas Annular Seals , 2013 .

[24]  Zhenping Feng,et al.  Rotordynamic performance prediction for surface-roughened seal using transient computational fluid dynamics and elliptical orbit model , 2012 .

[25]  Alexandrina Untaroiu,et al.  On the Dynamic Properties of Pump Liquid Seals , 2013 .

[26]  Dara W. Childs,et al.  A Comparison of Rotordynamic-Coefficient Predictions for Annular Honeycomb Gas Seals Using Three Different Friction-Factor Models , 2002 .

[27]  Dara W. Childs,et al.  Rotordynamic-Coefficient and Leakage Characteristics for Hole-Pattern-Stator Annular Gas Seals—Measurements Versus Predictions , 2004 .

[28]  David N. Liliedahl,et al.  Prediction of Aeroacoustic Resonance in Cavities of Hole-Pattern Stator Seals , 2011 .