Deciphering the Formation Process and Electrochemical Behavior of Novel P2/O3 Biphasic Layered Cathode with Long Cycle Life for Sodium-Ion Batteries

[1]  L. Wen,et al.  Study on the influence of Cu/F dual-doping on the Fe–Mn based compound as cathode material for sodium ion batteries , 2022, Journal of Power Sources.

[2]  Guoxiu Wang,et al.  Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries , 2022, Small methods.

[3]  Lifang Jiao,et al.  Low-cost layered oxide cathode involving cationic and anionic redox with a complete solid-solution sodium-storage behavior , 2022, Energy Storage Materials.

[4]  Ya‐Xia Yin,et al.  Mitigating the Large‐Volume Phase Transition of P2‐Type Cathodes by Synergetic Effect of Multiple Ions for Improved Sodium‐Ion Batteries , 2022 .

[5]  Liang Chen,et al.  O3-NaNi0.47Zn0.03Mn0.5O2 cathode material for durable Na-ion batteries , 2021 .

[6]  X. Qu,et al.  Advanced characterizations and measurements for sodium-ion batteries with NASICON-type cathode materials , 2021, eScience.

[7]  Wenguang Zhao,et al.  P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries , 2021, Nano Energy.

[8]  Xiaobo Ji,et al.  Structure modulation strategy for suppressing high voltage P3-O1 phase transition of O3-NaMn0.5Ni0.5O2 layered cathode , 2021, Chemical Engineering Journal.

[9]  Pengfei Zhou,et al.  Insights into the enhanced structure stability and electrochemical performance of Ti4+/F− co-doped P2-Na0.67Ni0.33Mn0.67O2 cathodes for sodium ion batteries at high voltage , 2021, Journal of Energy Chemistry.

[10]  Yong‐Mook Kang,et al.  Spinel/Post-Spinel Engineering on Layered Oxide Cathodes for Sodium-Ion Batteries , 2021, eScience.

[11]  Liang Shi,et al.  Constructing layer/tunnel biphasic Na0.6Fe0.04Mn0.96O2 enables simultaneous kinetics enhancement and phase transition suppression for high power/energy density sodium-ion full cell , 2021 .

[12]  Xuanwen Gao,et al.  Integrated titanium-substituted air stable O3 sodium layered oxide electrode via a complexant assisted route for high capacity sodium-ion battery , 2021 .

[13]  Fujun Li,et al.  Ultralow-strain Ti substituted Mn-vacancy layered oxides with enhanced stability for sodium-ion batteries , 2021, Journal of Energy Chemistry.

[14]  Y. Jung,et al.  Designing High Energy Sodium-Ion Battery Cathodes by Utilizing P2/O3 Biphasic Structure and Lithium Honeycomb Ordering. , 2021, Small.

[15]  Fujun Li,et al.  Suppressing interlayer-gliding and Jahn-Teller effect in P2-type layered manganese oxide cathode via Mo doping for sodium-ion batteries , 2021 .

[16]  Zhizhen Zhang,et al.  Unlocking the potential of P3 structure for practical Sodium-ion batteries by fabricating zero strain framework for Na+ intercalation , 2021 .

[17]  Qin-Chao Wang,et al.  Boosting Reversibility of Mn‐Based Tunnel‐Structured Cathode Materials for Sodium‐Ion Batteries by Magnesium Substitution , 2021, Advanced science.

[18]  Xiaobo Ji,et al.  Copper-substituted NaxMO2 (M = Fe, Mn) cathodes for sodium ion batteries: Enhanced cycling stability through suppression of Mn(III) formation , 2021 .

[19]  Shao‐hua Luo,et al.  Cu-doped layered P2-type Na0.67Ni0.33-xCuxMn0.67O2 cathode electrode material with enhanced electrochemical performance for sodium-ion batteries , 2021 .

[20]  J. L. Amo,et al.  Sodium manganese-rich layered oxides: Potential candidates as positive electrode for Sodium-ion batteries , 2021 .

[21]  Chenglong Zhao,et al.  Rational design of layered oxide materials for sodium-ion batteries , 2020, Science.

[22]  C. Ahn,et al.  An iron-doped NASICON type sodium ion battery cathode for enhanced sodium storage performance and its full cell applications , 2020, Journal of Materials Chemistry A.

[23]  Chenglong Zhao,et al.  A Novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 Cathode for Na-ion Batteries , 2020 .

[24]  Xiao‐Qing Yang,et al.  A Co‐ and Ni‐Free P2/O3 Biphasic Lithium Stabilized Layered Oxide for Sodium‐Ion Batteries and its Cycling Behavior , 2020, Advanced Functional Materials.

[25]  G. Ceder,et al.  The interplay between thermodynamics and kinetics in the solid-state synthesis of layered oxides , 2020, Nature Materials.

[26]  Dong Zhou,et al.  O3-type NaNi0.5Mn0.5O2 hollow microbars with exposed {0 1 0} facets as high performance cathode materials for sodium-ion batteries , 2020 .

[27]  Zhen-guo Wu,et al.  A novel Mn-based P2/tunnel/O3' tri-phase composite cathode with enhanced sodium storage properties. , 2020, Chemical Communications.

[28]  Yongchang Liu,et al.  Boosting fast and durable sodium-ion storage by tailoring well-shaped Na0.44MnO2 nanowires cathode , 2019, Electrochimica Acta.

[29]  Zhen-guo Wu,et al.  Ion-doping site variation induced composite cathode adjustment: a case study of layer-tunnel Na0.6MnO2 with Mg2+ doping at Na/Mn site. , 2019, ACS applied materials & interfaces.

[30]  Yongchang Liu,et al.  Realizing a High‐Performance Na‐Storage Cathode by Tailoring Ultrasmall Na2FePO4F Nanoparticles with Facilitated Reaction Kinetics , 2019, Advanced science.

[31]  Xingguo Qi,et al.  A new Tin-based O3-Na0.9[Ni0.45−/2Mn Sn0.55−/2]O2 as sodium-ion battery cathode , 2019, Journal of Energy Chemistry.

[32]  Yunhui Huang,et al.  A Hydrostable Cathode Material Based on the Layered P2@P3 Composite that Shows Redox Behavior for Copper in High-Rate and Long-Cycling Sodium-Ion Batteries. , 2019, Angewandte Chemie.

[33]  Mihui Park,et al.  Manganese based layered oxides with modulated electronic and thermodynamic properties for sodium ion batteries , 2019, Nature Communications.

[34]  Yong‐Mook Kang,et al.  P2/O3 phase-integrated Na0.7MnO2 cathode materials for sodium-ion rechargeable batteries , 2019, Journal of Alloys and Compounds.

[35]  Sheng Xu,et al.  Improving the Electrochemical Properties of the Manganese-Based P3 Phase by Multiphasic Intergrowth. , 2018, Inorganic chemistry.

[36]  Lingjun Li,et al.  Enhanced cycle stability of Na0.9Ni0.45Mn0.55O2 through tailoring O3/P2 hybrid structures for sodium-ion batteries , 2018, Journal of Power Sources.

[37]  Yu‐Guo Guo,et al.  Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 Cathode Material with Suppressed P2-O2 Phase Transition toward High-Performance Sodium-Ion Battery. , 2018, ACS applied materials & interfaces.

[38]  Weifeng Wei,et al.  Electrochemical Property-Structure Correlation for Ni-Based Layered Na-Ion Cathodes. , 2018, ACS applied materials & interfaces.

[39]  Xijin Xu,et al.  A stable layered P3/P2 and spinel intergrowth nanocomposite as a long-life and high-rate cathode for sodium-ion batteries. , 2018, Nanoscale.

[40]  Lilu Liu,et al.  Design and Comparative Study of O3/P2 Hybrid Structures for Room Temperature Sodium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[41]  Ya‐Xia Yin,et al.  Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries. , 2017, Journal of the American Chemical Society.

[42]  X. Lou,et al.  A Practical High-Energy Cathode for Sodium-Ion Batteries Based on Uniform P2-Na0.7 CoO2 Microspheres. , 2017, Angewandte Chemie.

[43]  Jun Chen,et al.  Stable layered Ni-rich LiNi0.9Co0.07Al0.03O2 microspheres assembled with nanoparticles as high-performance cathode materials for lithium-ion batteries , 2017 .

[44]  Heng Su,et al.  Transition metal oxides for sodium-ion batteries , 2016 .

[45]  Zhong Jin,et al.  Emerging non-lithium ion batteries , 2016 .

[46]  Lirong Zheng,et al.  Li-Substituted Co-Free Layered P2/O3 Biphasic Na0.67Mn0.55Ni0.25Ti0.2–xLixO2 as High-Rate-Capability Cathode Materials for Sodium Ion Batteries , 2016 .

[47]  Xiaodong Li,et al.  Electrode Nanomaterials for Room Temperature Sodium-Ion Batteries: A Review. , 2015, Journal of Nanoscience and Nanotechnology.

[48]  Lin Gu,et al.  Air‐Stable Copper‐Based P2‐Na7/9Cu2/9Fe1/9Mn2/3O2 as a New Positive Electrode Material for Sodium‐Ion Batteries , 2015, Advanced science.

[49]  L. Wan,et al.  One-nanometer-precision control of Al(2)O(3) nanoshells through a solution-based synthesis route. , 2014, Angewandte Chemie.

[50]  Donghan Kim,et al.  Sodium‐Ion Batteries , 2013 .

[51]  Mark N. Obrovac,et al.  Structure and Electrochemistry of NaxFexMn1-xO2 (1.0 , 2013 .

[52]  Hong Li,et al.  Thermodynamic analysis on energy densities of batteries , 2011 .

[53]  P. Hagenmuller,et al.  Electrochemical intercalation of sodium in NaxCoO2 bronzes , 1981 .