Efficiency of resilient wheels on the alleviation of railway ground vibrations

The aim of this paper is to show how resilient wheels, initially used for reducing the noise generated at the wheel/rail contact and stresses on wheels, are also efficient for reducing ground vibrations. Brussels tramway T2000 is considered as an example. A prediction model as complete as possible is used, taking into account the track and the vehicle dynamics. A multibody approach is chosen to describe the vehicle behaviour, over a finite element model for the track. The soil is modelled with the finite/infinite element approach, taking into account the layered configuration of the ground. Three variants of tram are analysed, focusing on the resilient wheel stiffness. The stiffness and damping properties of the wheels are obtained by updating a finite element model. A validation step is presented, based on measurements at the soil surface during the passing of the tram over a rough rail and a local rail defect. A modal decomposition is applied on the vehicle model with emphasis on relevant modal contributions in the wheel/rail forces. A sensitivity analysis of the resilient wheels stiffness is performed, showing a meaningful decrease of ground vibrations using a soft resilient material. This study shows that the vehicle dynamics intervenes in the onset of the vibration waves in the soil and demonstrates the real interest of a compound vehicle/track/soil model in the design of this kind of wheel.

[1]  Geert Lombaert,et al.  Ground-borne vibration due to static and dynamic axle loads of InterCity and high-speed trains , 2009 .

[2]  V K Garg,et al.  Dynamics of railway vehicle systems , 1984 .

[3]  Pascal Bouvet,et al.  OPTIMIZATION OF RESILIENT WHEELS FOR ROLLING NOISE CONTROL , 2000 .

[4]  L Auersch,et al.  Dynamic Axle Loads on Tracks with and Without Ballast Mats: Numerical Results of Three-Dimensional Vehicle-Track-Soil Models , 2006 .

[5]  B G Cavell.  RESILIENT WHEELS OF SAB DESIGN APPLIED TO MAINLINE LOCOMOTIVES OF HIGH POWER , 1974 .

[6]  Georges Kouroussis,et al.  Free field vibrations caused by high-speed lines: Measurement and time domain simulation , 2011 .

[7]  J. Domínguez,et al.  Experimental and numerical analyses of vibrations induced by high-speed trains on the Córdoba–Málaga line , 2009 .

[8]  Georges Kouroussis,et al.  A two-step time simulation of ground vibrations induced by the railway traffic , 2012 .

[9]  V. Garg.  Chapter 4 – Wheel–Rail Rolling Contact Theories , 1984 .

[10]  Georges Kouroussis,et al.  On the interest of integrating vehicle dynamics for the ground propagation of vibrations: the case of urban railway traffic , 2010 .

[11]  Victor V. Krylov,et al.  Effects of track properties on ground vibrations generated by high-speed trains , 1998 .

[12]  Geert Lombaert,et al.  The experimental validation of a numerical model for the prediction of railway induced vibrations , 2006 .

[13]  P. Fisette,et al.  Symbolic generation of large multibody system dynamic equations using a new semi-explicit Newton/Euler recursive scheme , 1996 .

[14]  Georges Kouroussis,et al.  Ground propagation of vibrations from railway vehicles using a finite/infinite-element model of the soil , 2009 .

[15]  D. Thompson,et al.  A comparison of a theoretical model for quasi-statically and dynamically induced environmental vibration from trains with measurements , 2003 .