Instability during cohesive zone growth

Tensile microcracking of quasi-brittle materials is studied by means of micromechanics, based on (i) an elasto-damaging cohesive zone model accounting for cohesive softening and (ii) a dilute distribution of non-interacting microcracks of uniform orientation and size. Considering virgin microcracks (initially without cohesive zones), macroscopic tensile load increase results in growth of cohesive zones ahead of stationary (non-propagating) cracks and, subsequently, in crack propagation which, notably, will be encountered before the cohesive zones are fully developed i.e. onset of instable cohesive zone growth will be encountered at a load level (i) at which tractions are still transmitted across the inner edges of the cohesive zones and (ii) at which the separation at the inner edges of the cohesive zones is smaller than its critical value. Focusing on onset of instable cohesive zone growth, the chosen approach allows for accessing quantities characterizing the stability limit (e.g., the intensity of the macroscopic loading and the opening at the inner edges of the cohesive zones), without raising the need for non-linear Finite Element analyses. It is shown that the tensile macrostrength of materials containing virgin microcracks is larger than the one related to cracks with already initially fully developed cohesive zones, and related strength differences are quantified for a wide class of cohesive softening behavior. The proposed model is validated by comparing model predictions with an exact solution (available for the special case of constant cohesive tractions) and with results from reliable Finite Element analyses. The paper will be of interest for engineers involved in testing and/or in modeling of quasi-brittle media including cementitious materials and rock.

[1]  Joseph F Labuz,et al.  Characteristic strength of quasi-brittle materials , 1998 .

[2]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[3]  J. Salençon.  Handbook of continuum mechanics , 2001 .

[4]  G. I. Barenblatt.  The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks , 1959 .

[5]  L. Dormieux,et al.  Micromechanical Interpretation of the Dissipation Associated With Mode I Propagation of Microcracks in Brittle Materials , 2009 .

[6]  Luc Dormieux,et al.  Poroelasticity and damage theory for saturated cracked media , 2005 .

[7]  Y. Uchida,et al.  Tension softening diagrams and evaluation of properties of steel fiber reinforced concrete , 2000 .

[8]  J. Hutchinson,et al.  The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .

[9]  L. Dormieux,et al.  Approche micromécanique du couplage perméabilité–endommagement , 2004 .

[10]  M. Gurtin.  Thermodynamics and the cohesive zone in fracture , 1979 .

[11]  A. Needleman.  A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .

[12]  John Lambros,et al.  Theoretical development and experimental validation of a thermally dissipative cohesive zone model for dynamic fracture of amorphous polymers , 2003 .

[13]  C. Hellmich,et al.  A combined fracture‐micromechanics model for tensile strain‐softening in brittle materials, based on propagation of interacting microcracks , 2007 .

[14]  M.R.A. van Vliet,et al.  Uniaxial tension test for the determination of fracture parameters of concrete : state of the art , 2002 .

[15]  M. Elices,et al.  The cohesive zone model: advantages, limitations and challenges , 2002 .

[16]  J. Mier,et al.  Experimental investigation of size effect in concrete and sandstone under uniaxial tension , 2000 .

[17]  Z. Hashin.  Analysis of Composite Materials—A Survey , 1983 .

[18]  I. N. Sneddon,et al.  Crack Problems in the Classical Theory of Elasticity , 1969 .

[19]  Bernhard Pichler,et al.  Cohesive zone size of microcracks in brittle materials , 2007 .

[20]  M. Ortiz,et al.  Computational modelling of impact damage in brittle materials , 1996 .

[21]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[22]  W. Knauss,et al.  A Nonlinear Analysis of an Equilibrium Craze: Part I—Problem Formulation and Solution , 1988 .

[23]  M. Elices,et al.  Fracture mechanics parameters of concrete: An overview , 1996 .