Fabrication-aware shape parametrisation for the structural optimisation of shell structures

The difficulty to construct mechanically optimal shells may limit the use of structural optimisation in practice. The objective of this paper is to propose a new parametric representation of doubly curved shapes suited for structural optimisation of architectural shells that inherently considers fabrication constraints. We focus on a common construction constraint: the covering of building envelopes with planar facets. This paper proposes to implement the so-called marionette technique as a Computer-Aided-Design tool that guarantees covering of free-form shapes with planar quad-rilateral facets. General considerations on the size and nature of the optimisation space created with this method are made. It is demonstrated through different case-studies that the quality of the parametrisation for shape optimisation of shell structures is similar to the one offered by Bezier surfaces, an ubiquitous modelling technique. The proposed method conciliates thus fabrication and structural performance.

[1]  Roland Wüchner,et al.  Computational methods for form finding and optimization of shells and membranes , 2005 .

[2]  Qian Wang,et al.  Review of formulations for structural and mechanical system optimization , 2005 .

[3]  Olivier Baverel,et al.  Marionette Meshes: Modelling free-form architecture with planar facets , 2017 .

[4]  Claudio Borri,et al.  Two shape parametrizations for structural optimization of triangular shells , 2016 .

[5]  V. Braibant,et al.  Shape optimal design using B-splines , 1984 .

[6]  Dennis R. Shelden,et al.  A Parametric Strategy for Freeform Glass Structures Using Quadrilateral Planar Facets , 2004, ACADIA proceedings.

[7]  C. D. Perttunen,et al.  Lipschitzian optimization without the Lipschitz constant , 1993 .

[8]  David P. Billington,et al.  The Tower and the Bridge: The New Art of Structural Engineering , 1985 .

[9]  Eckart Zitzler,et al.  HypE: An Algorithm for Fast Hypervolume-Based Many-Objective Optimization , 2011, Evolutionary Computation.

[10]  Johannes Wallner,et al.  Geometric Modeling with Conical Meshes and Developable Surfaces , 2006, ACM Trans. Graph..

[11]  M. Powell.  A View of Algorithms for Optimization without Derivatives 1 , 2007 .

[12]  Kai-Uwe Bletzinger,et al.  Shape optimization of thin walled structures governed by geometrically nonlinear mechanics , 2012 .

[13]  J. Argyris,et al.  The TRIC shell element: theoretical and numerical investigation , 2000 .

[14]  Kyung K. Choi,et al.  Numerical method for shape optimization using T-spline based isogeometric method , 2010 .

[15]  Cyril Douthe,et al.  Isogonal moulding surfaces: A family of shapes for high node congruence in free-form structures , 2015 .

[16]  T. Hughes,et al.  Isogeometric analysis : CAD, finite elements, NURBS, exact geometry and mesh refinement , 2005 .

[17]  Makoto Ohsaki,et al.  Shape Optimization of Free-Form Shells Using Invariants of Parametric Surface , 2010 .

[18]  R. Motro,et al.  Structural Morphology Issues in Conceptual Design of Double Curved Systems , 2008 .

[19]  Jonathan Balzer,et al.  Statics-Sensitive Layout of Planar Quadrilateral Meshes , 2010, AAG.

[20]  Jean-Antoine Désidéri,et al.  Nested and self-adaptive Bézier parameterizations for shape optimization , 2007, J. Comput. Phys..

[21]  Rory P. Clune.  Algorithm selection in structural optimization , 2013 .

[22]  Roland Wüchner,et al.  Optimal shapes of mechanically motivated surfaces , 2010 .

[23]  Ing. Ekkehard Ramm,et al.  Shape optimization of shell structures , 1993 .

[24]  Makoto Ohsaki,et al.  Shape optimization of curves and surfaces considering fairness metrics and elastic stiffness , 2004 .

[25]  Bing Guo,et al.  Modeling and structural behavior of cable-stiffened single-layer latticed domes of hexagonal meshes , 2015 .

[26]  Ruo-qiang Feng,et al.  Shape optimization method of free-form cable-braced grid shells based on the translational surfaces technique , 2013 .

[27]  Andrew Borgart,et al.  NEW CHALLENGES FOR THE STRUCTURAL MORPHOLOGY GROUP , 2010 .

[28]  D. Finkel,et al.  Direct optimization algorithm user guide , 2003 .

[29]  Sergio Pellegrino,et al.  Multi-objective optimization of free-form grid structures , 2009 .

[30]  Olivier Baverel,et al.  Non-Standard Patterns for Gridshell Structures: Fabrication and Structural Optimization , 2017 .

[31]  M. Powell.  A Direct Search Optimization Method That Models the Objective and Constraint Functions by Linear Interpolation , 1994 .

[32]  E. Ramm,et al.  Form finding of shells by structural optimization , 1993, Engineering with Computers.

[33]  Olivier Baverel,et al.  Structural Morphology and Performance of Plated Structures with Planar Quadrilateral Facets , 2017 .

[34]  J. Kruth,et al.  NURBS curve and surface fitting for reverse engineering , 1998 .

[35]  Olivier Baverel,et al.  Linear buckling of quadrangular and kagome gridshells: A comparative assessment , 2017 .

[36]  Kai-Uwe Bletzinger,et al.  In-plane mesh regularization for node-based shape optimization problems , 2014 .

[37]  Romain Mesnil.  Structural explorations of fabrication-aware design spaces for non-standard architecture , 2017 .

[38]  Roland Wüchner,et al.  Regularization of shape optimization problems using FE-based parametrization , 2013 .