Effects of beam offset on mechanical properties and corrosion resistance of Alloy 690–SUS 304L EBW joints for nuclear power plant

[1]  W. Tsai,et al.  Effect of heat treatment on the sensitization of Alloy 182 weld , 2005 .

[2]  J. Mayer,et al.  Effects of Nb on the microstructure and corrosive property in the Alloy 690–SUS 304L weldment , 2005 .

[3]  Hwa-Teng Lee,et al.  Dissimilar welding of nickel-based Alloy 690 to SUS 304L with Ti addition , 2004 .

[4]  Antti S. Salminen,et al.  Effect of joint configuration on high-power diode laser welding of steel , 2004, SPIE LASE.

[5]  Jae-Do Kim,et al.  C-ring stress corrosion test for Inconel 600 and Inconel 690 sleeve joint welded by Nd:YAG laser , 2004 .

[6]  W. Tsai,et al.  Environmentally assisted cracking behavior of single and dual phase stainless steels in hot chloride solutions , 2004 .

[7]  I. Lo,et al.  Effect of heat treatment on the precipitation and pitting corrosion behavior of 347 SS weld overlay , 2003 .

[8]  Hwa-Teng Lee,et al.  Evaluation of effects of niobium and manganese addition on nickel base weldments , 2003 .

[9]  Hwa-Teng Lee,et al.  The microstructure and fracture behavior of the dissimilar alloy 690-SUS 304L joint with various Nb addition , 2003 .

[10]  Hwa-Teng Lee,et al.  Effects of filler metal composition on joining properties of alloy 690 weldments , 2002 .

[11]  H.T. Lee,et al.  Characteristics of dissimilar welding of alloy 690 to 304L stainless steel , 2001 .

[12]  J. Meyer,et al.  Corrosion behavior of a welded stainless-steel orthopedic implant. , 2001, Biomaterials.

[13]  Roger C. Reed,et al.  A process model for the distortion induced by the electron-beam welding of a nickel-based superalloy , 2000 .

[14]  Joung-Soo Kim,et al.  Effects of sensitization treatment on the evolution of Cr carbides in rapidly solidified Ni-base Alloy 600 by a CO2 laser beam , 2000 .

[15]  Hwa-Teng Lee,et al.  Analysis of microstructure and mechanical properties in alloy 690 weldments using filler metals I-82 and I-52 , 1999 .

[16]  R. L. Cowan,et al.  Experience and assessment of stress corrosion cracking in L-grade stainless steel BWR internals , 1997 .

[17]  J. Congleton,et al.  Stress corrosion cracking of alloy 600 and alloy 690 in hydrogen/steam at 380 °C , 1997 .

[18]  R. Karppi,et al.  The application of electron beam welding for the joining of dissimilar metals: an overview , 1996 .

[19]  K. Stiller,et al.  Structure, chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690 , 1996 .

[20]  T. Ishihara.  Corrosion failure and its prevention in light water reactor power plants , 1989 .

[21]  A. J. Sedriks,et al.  The Effect of Nickel Content on the Stress Corrosion Resistance of Fe-Cr-Ni Alloys in an Elevated Temperature Caustic Environment , 1976 .