Abstract In this paper different packaged air-cooled systems, operating on scroll compressors, are experimentally analysed from the point of view of the relation between energy efficiency and actual capacity. Single compressor, double compressors and double compressors with uneven volumetric capacity units are tested. Experimental tests demonstrated that cooling capacity control by means of variation of rotational speed is an suitable solution for improving the part load efficiency of these systems. Step capacity units obtained by splitting the system volumetric capacity between two compressors are also effective solutions. Nevertheless they appear to be more efficient than single inverter driven chillers only for part load conditions lower than 60%. In the analysed cooling capacity range (25–50 kW), tandem compressors chillers with one inverter driven compressor appear the most efficient solution combining rotational speed with step capacity control. Seasonal energy efficiency ratios were obtained with prEN 14825 calculation method confirming reduced energy consumption associated to continuous and step cooling capacity control.
[1]
Alessandro Beghi,et al.
Advanced control systems for single compressor chiller units
,
2009
.
[2]
Luigi Schibuola,et al.
SIMPLIFIED MODELS TO SIMULATE PART LOAD PERFORMANCES OF AIR CONDITIONING EQUIPMENTS
,
2003
.
[3]
M. McLinden,et al.
NIST Standard Reference Database 23 - NIST Thermodynamic and Transport Properties REFPROP, Version 7.0
,
2002
.
[4]
Savvas A. Tassou,et al.
VARIABLE-SPEED CAPACITY CONTROL IN REFRIGERATION SYSTEMS
,
1996
.
[5]
Young Chul Kim,et al.
Performance analysis on a multi-type inverter air conditioner
,
2001
.
[6]
Savvas A. Tassou,et al.
Comparative performance evaluation of positive displacement compressors in variable-speed refrigeration applications
,
1998
.
[7]
Per Fahlén,et al.
Capacity-controlled ground source heat pumps in hydronic heating systems
,
2007
.