Control systems for direct steam generation in linear concentrating solar power plants – A review

Concentrating Solar Power (CSP) plants generate renewable electricity using the conversion of solar direct normal irradiation into thermal energy, then into mechanical work and electricity through the use of a thermodynamic cycle. Among the several available technologies, Direct Steam Generation (DSG), in which steam is generated directly in the absorber tubes of the solar field, and then directly fed to the turbine or thermal storage, holds interesting advantages. However, the steam generation system shows a difficult dynamic behavior which constitutes a challenge for the control system design. It is mainly due to the conjunction of the natural transient condition of solar irradiation and the presence of two-phase flow in the absorber tubes. This paper reviews the control methods of the DSG systems used in linefocus CSP. The control systems are either proposed in literature, or actually applied in currently running plants or prototypes, although an extensive description is difficult to obtain in the case of the latter. The control systems are classified according to which DSG operation mode they refer to.

[1]  G. Morrison,et al.  Compact Linear Fresnel Reflector solar thermal powerplants , 2000 .

[2]  Manuel Berenguel,et al.  Control scheme for direct steam generation in parabolic troughs under recirculation operation mode , 2006 .

[3]  M. Behnia,et al.  Modelling of Parabolic Trough Direct Steam Generation Solar Collectors , 1998, Renewable Energy.

[4]  Masami Ito,et al.  A process-model control for linear systems with delay , 1981 .

[5]  Mehmet Mercangöz,et al.  Modeling and control of a Linear Fresnel Collector system , 2014, 2014 European Control Conference (ECC).

[6]  Shane A. Lynn,et al.  Temperature estimation for a plasma-propelled rocket engine [Applications of control] , 2009, IEEE Control Systems.

[7]  Jan Fabian Feldhoff,et al.  Comparative system analysis of direct steam generation and synthetic oil parabolic trough power plants with integrated thermal storage , 2012 .

[8]  E. Camacho,et al.  Control concepts for direct steam generation in parabolic troughs , 2005 .

[9]  Eduardo F. Camacho,et al.  Robust tuning of dead-time compensators for processes with an integrator and long dead-time , 1999, IEEE Trans. Autom. Control..

[10]  E. Zarza,et al.  INDITEP: The first pre-commercial DSG solar power plant , 2006 .

[11]  M. Eickhoff,et al.  Applied research concerning the direct steam generation in parabolic troughs , 2003 .

[12]  Markus Eck,et al.  The Potential of direct steam Generation in Parabolic Troughs - Results of the German Project DIVA , 2008 .

[13]  Jan Fabian Feldhoff,et al.  Experiences with Direct Steam Generation at the Kanchanaburi Solar Thermal Power Plant , 2012 .

[14]  C. C. Hang,et al.  A new Smith predictor for controlling a process with an integrator and long dead-time , 1994, IEEE Trans. Autom. Control..

[15]  Robert Pitz-Paal,et al.  Steam temperature stability in a direct steam generation solar power plant , 2011 .

[16]  Peter Tanner,et al.  Control of Solar Steam Generators , 2011 .

[17]  Jan Fabian Feldhoff,et al.  Concept comparison and test facility design for the analysis of direct steam generation in once-through mode , 2012 .

[18]  M. Eck,et al.  Controller Design for Injection Mode Driven Direct Solar Steam Generating Parabolic Trough Collectors , 2000 .

[19]  M. Berenguel,et al.  Direct steam generation in solar boilers , 2004, IEEE Control Systems.

[20]  R. Pitz-Paal,et al.  Advancements in the Field of Direct Steam Generation in Linear Solar Concentrators—A Review , 2014 .

[21]  Babatunde A. Ogunnaike,et al.  Process Dynamics, Modeling, and Control , 1994 .

[22]  William M. Conlon,et al.  Superheated Steam From CLFR Solar Steam Generators , 2011 .

[23]  E. K. May,et al.  Steam generation in line-focus solar collectors: a comparative assessment of thermal performance, operating stability, and cost issues , 1982 .

[24]  Markus Eck,et al.  Direct steam generation in parabolic troughs: Final results and conclusions of the DISS project , 2004 .

[25]  M. Matausek,et al.  A modified Smith predictor for controlling a process with an integrator and long dead-time , 1996, IEEE Trans. Autom. Control..

[26]  Jan Fabian Feldhoff,et al.  Status and First Results of the DUKE Project – Component Qualification of New Receivers and Collectors , 2014 .

[27]  Markus Eck,et al.  Modelling and Control of a Solar-Thermal Parabolic Trough DSG Superheater With Several Parallel Rows and Central Steam Separation , 2007 .

[28]  Markus Eck,et al.  Dynamics and control of parabolic trough collector loops with direct steam generation , 2007 .

[29]  Dirk Krüger,et al.  Return of Experience on Transient Behavior at the DSG Solar Thermal Power Plant in Kanchanaburi, Thailand , 2015 .

[30]  O. Göbel,et al.  Heat Transfer of an Absorber Tube with Direct Steam Generation by Water Injection. , 1995 .

[31]  Fumiki Kito.  On the 4th International Conference on Properties of Steam, and Water Turbines Section of IEC(International Electrotechnical Commission)held at Philadelphia, Sept.1954. , 1955 .