Experimental investigation on wettability and capillary performance of ultrasonic modified grooved aluminum wicks

[1]  Y. Liu,et al.  Liquid phase enhanced sintering of porous aluminum for cylindrical Al-acetone heat pipe , 2020, International Journal of Heat and Mass Transfer.

[2]  S. Yeo,et al.  Bubble dynamics and cavitation intensity in milli-scale channels under an ultrasonic horn. , 2019, Ultrasonics sonochemistry.

[3]  Yong Tang,et al.  Experimental study on thermal performances of ultra-thin flattened heat pipes , 2019, International Journal of Heat and Mass Transfer.

[4]  Yong Tang,et al.  Experimental study on the thermal performance of a novel ultra-thin aluminum flat heat pipe , 2019, Renewable Energy.

[5]  Ryan J. Lewis,et al.  Characterization of Hybrid Wicking Structures for Flexible Vapor Chambers , 2019, Journal of Electronic Packaging.

[6]  C. S. Tan,et al.  Thermal design optimization of evaporator micropillar wicks , 2018, International Journal of Thermal Sciences.

[7]  Qiuwan Wang,et al.  Thermal performance analysis of flat heat pipe with graded mini-grooves wick , 2018, Applied Energy.

[8]  Shwin-Chung Wong,et al.  Visualization experiments on flat-plate heat pipes with composite mesh-groove wick at different tilt angles , 2018, International Journal of Heat and Mass Transfer.

[9]  Yong Li,et al.  Review of applications and developments of ultra-thin micro heat pipes for electronic cooling , 2018, Applied Energy.

[10]  A. Nagalingam,et al.  Effects of ambient pressure and fluid temperature in ultrasonic cavitation machining , 2018, The International Journal of Advanced Manufacturing Technology.

[11]  D. Chun,et al.  Control of laser-ablated aluminum surface wettability to superhydrophobic or superhydrophilic through simple heat treatment or water boiling post-processing , 2018 .

[12]  Liang Wang,et al.  Impact of time on ultrasonic cavitation peening via detection of surface plastic deformation , 2018, Ultrasonics.

[13]  W. Yuan,et al.  Experimental investigation on thermal performance of aluminum vapor chamber using micro-grooved wick with reentrant cavity array , 2018 .

[14]  Yong Tang,et al.  Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes , 2018 .

[15]  Ji Li,et al.  Managing high heat flux up to 500 W/cm2 through an ultra-thin flat heat pipe with superhydrophilic wick , 2017 .

[16]  Yong Tang,et al.  Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer , 2017 .

[17]  Gang Wang,et al.  Enhancement of capillary and thermal performance of grooved copper heat pipe by gradient wettability surface , 2017 .

[18]  Yong Tang,et al.  Enhanced capillary performance in axially grooved aluminium wicks by alkaline corrosion treatment , 2017 .

[19]  Yong Tang,et al.  Fabrication and capillary characterization of micro-grooved wicks with reentrant cavity array , 2017 .

[20]  I. Catton,et al.  Designer fluid performance and inclination angle effects in a flat grooved heat pipe , 2016 .

[21]  Ji Li,et al.  Experimental studies on a novel thin flat heat pipe heat spreader , 2016 .

[22]  Bo Li,et al.  Investigation of ultra-thin flattened heat pipes with sintered wick structure , 2015 .

[23]  Yong Tang,et al.  Characterization of capillary rise dynamics in parallel micro V-grooves , 2014 .

[24]  Yong Tang,et al.  Characterization of capillary performance of composite wicks for two-phase heat transfer devices , 2013 .

[25]  H. Möhwald,et al.  Crystalline Silicon under Acoustic Cavitation: From Mechanoluminescence to Amorphization , 2012 .

[26]  H. Terryn,et al.  Scanning Kelvin probe study of (Oxyhydr)oxide surface of aluminum alloy , 2012 .

[27]  P. Larkin.  Infrared and Raman Spectroscopy: Principles and Spectral Interpretation , 2011 .

[28]  H. Möhwald,et al.  Sonochemical formation of metal sponges. , 2011, Nanoscale.

[29]  H. Möhwald,et al.  Ultrasound-driven design of metal surface nanofoams. , 2010, Nanoscale.

[30]  Yong Tang,et al.  Experimental investigation on capillary force of composite wick structure by IR thermal imaging camera , 2010 .

[31]  Brian M. Holley,et al.  Permeability and effective pore radius measurements for heat pipe and fuel cell applications , 2006 .

[32]  H. Terryn,et al.  Ageing of aluminium oxide surfaces and their subsequent reactivity towards bonding with organic functional groups , 2004 .

[33]  Satoshi Takeda,et al.  Surface OH group governing adsorption properties of metal oxide films , 1999 .

[34]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[35]  A. Cassie,et al.  Wettability of porous surfaces , 1944 .

[36]  R. N. Wenzel.  RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[37]  E. W. Washburn.  The Dynamics of Capillary Flow , 1921 .