Low-noise amplifier comparison at 2 GHz in 0.25-/spl mu/m and 0.18-/spl mu/m RF-CMOS and SiGe BiCMOS

Low-noise amplifiers (LNA) have been designed and implemented in 0.25-/spl mu/m and 0.18-/spl mu/m SiGe BiCMOS and RF-CMOS technologies. The LNA have been designed for the same WCDMA application and system specifications, allowing meaningful comparisons to be made. This paper presents the design methodology for these bipolar and CMOS switched-gain LNA and compares the simulated and measured results. A bypass switch topology is also presented. The results show that each technology can meet WCDMA LNA specifications. Measurements show noise figures of 1.4, 1.7, and 1.1 dB for LNA implemented in 0.25-/spl mu/m SiGe BiCMOS, 0.25-/spl mu/m CMOS, and 0.18-/spl mu/m SiGe BiCMOS, respectively. These LNA show 14 to 16 dB of gain and +3 to +4-dBm out-of-band IIP3 at 5 to 6 mA current from 3 V. Of these three measured LNA, the 0.18-/spl mu/m bipolar shows the best performance; however, simulations of a 0.18-/spl mu/m RF-CMOS LNA show further improved IIP3.