Shape optimization of cantilever beam for wind energy harvesting

The aim of this paper is to model and simulate a cantilever beam as energy harvester to expose to wind vibrations. A mathematical model describes the behavior of cantilever beam and the electromechanical coupling, using piezoelectric constitutive equations. An experimental setup of a fixed configuration (dimensions, materials, boundaries and shape) is performed by means of such device and the effects caused by the wind force on the cantilever are analyzed. The same device is used for a simulation, implemented with Comsol Multiphysics, in which wind force is simulated like a pressure acting on the cantilever. The comparison between simulation and experimental results validates the simulation method and allows an appropriate choice of the most suitable shape for this kind of cantilever: the choice is carried out using the optimization platform KIMEME.

[1]  V. K. Varadan,et al.  Characterization of all the elastic, dielectric, and piezoelectric constants of uniaxially oriented poled PVDF films , 2002, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  Xue-Feng He,et al.  Wind energy harvesting based on flow-induced-vibration and impact , 2013 .

[3]  Giuseppe Acciani,et al.  Modeling and simulation of cantilever beam for wind energy harvesting , 2016, Journal of Vibroengineering.

[4]  Peter Woias,et al.  Characterization of different beam shapes for piezoelectric energy harvesting , 2008 .

[5]  M. Powell.  The BOBYQA algorithm for bound constrained optimization without derivatives , 2009 .

[6]  Gil Ho Yoon,et al.  Topology optimization of piezoelectric energy harvesting devices considering static and harmonic dynamic loads , 2012, Adv. Eng. Softw..

[7]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.

[8]  Ephrahim Garcia,et al.  Optimal placement and sizing of paired piezoactuators in beams and plates , 1994 .

[9]  Stanimir Valtchev,et al.  Conversion of wind-induced vibrations into electricity , 2014, 2014 IEEE 36th International Telecommunications Energy Conference (INTELEC).

[10]  Daniel J. Inman,et al.  Piezoelectric Energy Harvesting , 2011 .

[11]  Noboru Kikuchi,et al.  TOPOLOGY OPTIMIZATION OF COMPLIANT MECHANISMS USING THE HOMOGENIZATION METHOD , 1998 .

[12]  Hidenobu Takao,et al.  Flexible Piezoelectric Sheet for Wind Energy Harvesting , 2013 .

[13]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .